11. A tennis ball is thrown straight up in the air, leaving the person's hand with an initial velocity of 3.0 m/s, as shown to the right. What is the displacement of the ball above the person's hand?​

Answer:

Standard units are the units we usually use to measure the weight, length or capacity of objects.

Answer:

THE SYSTEM OF UNITS WHICH IS AGREED BY THE INTERNATIONAL CONVENTION OF SCIENTISTS HELD IN FRANCE IN 1960 IS CALLED SI SYSTEM.

Answer:

A concave mirror, or converging mirror, has a reflecting surface that is recessed inward (away from the incident light). Concave mirrors reflect light inward to one focal point. They are used to focus light.

The answer is definitely Potassium

Answer:

The angular velocity after the children jump off is approximately 1.4 rad/s

Explanation:

The given parameters are;

The masses of each child, m₁, and m₂ = 60 kg

The mass of the merry-go-round, m₃ = 140 kg

The initial angular velocity, [tex]\omega_i[/tex] = 0.75 rad/s

The angular velocity after the children jump off = [tex]\omega_f[/tex]  

According to the principle of conservation of angular momentum

The angular momentum = I × ω

The moment of inertia, I = m × R²

The total initial angular momentum = [tex]I_i \times \omega_i = m_i \times R^2 \times \omega_i[/tex]

The total angular momentum after the children jump off = [tex]I_f \times \omega_f = m_f \times R^2 \times \omega_f[/tex]

The initial mass, [tex]m_i[/tex] = m₁ + m₂ + m₃ = 60 kg + 60 kg + 140 kg = 260 kg

The final mass, [tex]m_f[/tex] = m₃ = 140 kg

According to the principle of conservation of linear momentum, we have;

[tex]I_i \times \omega_i[/tex] = [tex]I_f \times \omega_f[/tex]

Therefore;

260 kg × R² × 0.75 rad/s = 140 kg × R² × [tex]\omega_f[/tex]

∴ [tex]\omega _f[/tex] = (260 kg × R² × 0.75 rad/s)/(140 kg × R²) = 1.39285714 rad/s. ≈ 1.4 rad/s

The angular velocity after the children jump off, [tex]\omega _f[/tex] ≈ 1.4 rad/s.

Explanation:

In the first law, an object will not change its motion unless a force acts on it. In the second law, the force on an object is equal to its mass times its acceleration. In the third law, when two objects interact, they apply forces to each other of equal magnitude and opposite direction.6 days ago

Newton first law state that anything in motion or on rest will continue to do so until an external force is applied on it

Newton 3rd law stare that every action have equal and opposite reaction

Answer:

The speed of the comet at the surface of the star is approximately 1,208,694.7 m/s

Explanation:

Question parameter obtained online; The mass of the star, M = 5 × 10³¹ kg

Explanation;

The given mass of the comet, m = 2 × 10⁸ kg

The initial velocity of the comet, v → 0

The distance of the comet from the star, d = 700,000,000 km

The gravitational potential at d = G·M·m/d

The kinetic energy of the comet, K.E. = m·v²/2

The kinetic energy of the comet at d = m·(0)²/2 = 0

The gravitational potential at the surface of the star, R = G·M·m/R

The kinetic energy of the comet at the surface of the star, R = m·(v)²/2 = 0

Where;

M = The mass of the star = 5 × 10³¹ kg

[tex]M_{Sun}[/tex] = The mass of the Sun = 1.989 × 10³⁰ kg

M/[tex]M_{Sun}[/tex] = 5 × 10³¹/(1.989 × 10³⁰) ≈ 25

G = The universal gravitational constant = 6.67430 × 10⁻¹¹ N·m²/kg²

R = The radius of the star

Therefore, we have;

m·(0)²/2 - G·M·m/d = m·v²/2 - G·M·m/R

∴ v = √((G·M·m/R - G·M·m/d)×2/m) = √(2·G·M(1/R - 1/d))

Therefore; v = (2 × 6.67430 × 10⁻¹¹ × 5 × 10³¹ × (1/R - 1/700,000,000,000))

v = 81696389149.1×√(1/R - 1/700,000,000,000).

The speed of the comet at the surface of the star, v = 81696389149.1×√(1/R - 1/700,000,000,000)

The mass radius relationship is given as follows;

[tex]\dfrac{R}{R_{Sun}} = 1.30 \times \left(\dfrac{M}{M_{Sun}} \right)^{\dfrac{1}{2} }[/tex]

[tex]R = R_{Sun} \times 1.30 \times \left(\dfrac{M}{M_{Sun}} \right)^{\dfrac{1}{2} }[/tex]

The radius of the Sun = 696,340,000 M

∴ R ≈ 696,340,000 × 1.3 × √(25.14) = 4538865694.76

R = 4538865694.76 m

v = 81696389149.1×√(1/4538865694.76 - 1/700,000,000,000) ≈ 1208694.7  m/s

Answer:

The answer is ( D) i. e both b and c.

Answer:

Yes, when the 2 vectors are same in magnitude and direction. Yes, when the 2 vectors are same in magnitude but opposite in sense. Yes, when the 2 vectors are same in magnitude making an angle of 2π3 with each other.

Explanation:

Hope it helps you

The condition under which the resultant of two vectors will be zero is that the vectors must be in equilibrium.

The conditions under which the resultant of two non zero vectors acting on a body must be zero.

[tex]\bar R = \bar R_A + \bar R_B = 0[/tex]

Thus, the condition under which the resultant of two vectors will be zero is that the vectors must be in equilibrium.

Learn more here: https://brainly.com/question/17574217

Explanation:

If the mass of the inclined plane is large enough, could N ever be equal to mgcosθ. Reasons?

So far I've come up with: mgcosθ−N=ma meaning if N were to equal mgcosθ, ma=0. Since the surfaces are frictionless and since N is acting on the inclined plane too(it'll have a horizontal component), this isn't possible. Am I right? Where am I going wrong?

Explanation:

I think it is the third image as marked in the diagram I kept above because as we know first class levers have the fulcrum between the force and the load

Answer:

The result of pressure within a confined aquifer that creates a potentiometric surface

Explanation:

There are conditions under the Earth's surface, where porous rock layers are tilted and also have a confining, less porous, rock layer about the their boundary, forming a confined aquifer. The existing pressure in the aquifer is therefore confined within the water and the porous  rock layer, such that drilling into the pressurized aquifer leads to the water rising under the pressure existing in the aquifer, to a potentiometric surface which is above the actual underground level of the aquifer

Answer:

Satellites don't fall from the sky because they are orbiting Earth. Even when satellites are thousands of miles away, Earth's gravity still tugs on them. Gravity--combined with the satellite's momentum from its launch into space--cause the satellite go into orbit above Earth, instead of falling back down to the ground.

Answer:

Explanation:

Discount the time here; it's not important. It doesn't tell you how long it takes the car to stop, it only refers to reaction time, which means nothing in the scheme of things.

The useful info is as follows:

initial velocity = 20 m/s

final velocity = 0 m/s

a = -10 m/s/s

and we are looking for the displacement. Use the following equation:

[tex]v^2=v_0^2+2a[/tex]Δx

where v is the final velocity, v₀ is the initial velocity, a is the deceleration (since it's negative), and Δx is displacement. Filling in:

[tex]0^2=(20)^2+2(-10)[/tex]Δx and

0 = 400 - 20Δx and

-400 = -20Δx so

Δ = 20 meters

Answer:

C. Positively charged

Explanation:

The plum pudding model of the atom proposes by J. J. Thomson consisted of electrons which lay embedded as the raisins within a dough or soup that was positively charged. The electron was discovered by J. J. Thomson in 1897 through cathode ray tube experiments.

Based on the plum pudding model, if all the negatively charge electrons contained in an atom are removed, the material remaining will be the positively charged soup

Explanation:

Ultrasound refers to sound waves having frequencies greater than the frequency range limit. Ultrasound has the same physical qualities as "regular" (audible) music, except that individuals cannot hear it. Ultrasound devices use frequencies ranging from 20 kHz to a few gigahertz.

The frequencies of ultrasound utilised in clinical settings are generally between 2 and 12 MHz. Shorter wavelengths have a larger penetration depth into the body but less resolution; longer wavelengths have a greater depth of penetration but have a restricted depth of penetration.

Answer:

Explanation:

Because vectors have direction and x and y components you can't just add them and say that their length is 16 because A is 8 units and so is B. What you're actually finding is the magnitude and direction of the vector that results from this addition. The magnitude is the length of the resultant vector, which comes from the x and y components of A and B, and the direction is the angle between the resultant vector and the positive x axis. To add the vectors, then, we need to find the x and y components of each. We'll do the x components of A and B first so we can add them to get the x component of C. Since x values are directly related to cos, the formula to find the x components of vectors is

[tex]V_x=Vcos\theta[/tex] which is the magnitude of the vector (its length) and the angle. Finding the x components of A:

[tex]A_x=8.0cos45[/tex] so

[tex]A_x=5.7[/tex] and for B:

[tex]B_x=8.0cos180[/tex] since the negative x axis is the 180 degree axis and

[tex]B_x=-8.0[/tex] If we add them, we get

[tex]C_x=-2.3[/tex]

Now onto the y components. The formula for that is almost the same as the x components except use sin instead of cos:

[tex]A_y=8.0sin45[/tex] so

[tex]A_y=5.7[/tex] and

[tex]B_y=8.0sin180[/tex] so

[tex]B_y=0[/tex] If we add them, we get

[tex]C_y=5.7[/tex]

Now for the final magnitude:

[tex]C_{mag}=\sqrt{(-2.3)^2+(5.7)^2}[/tex] and

[tex]C_{mag}=6.1 units[/tex] and now onto the direction.

The x component of C is positive and the y component is negative, which means that the direction has us at an angle is quadrant 2; we add 180 to whatever the angle is. Finding the angle:

[tex]tan^{-1}(\frac{C_y}{C_x})=(\frac{5.7}{-2.3})[/tex] = -68 + 180 = 112 degrees

The resultant vector of A + B has a magnitude of 6.1 and a direction of 112°

Do the same thing for subtraction, except if you're subtracting B from A, the direction that B is pointing has to go the opposite way. That means that A doesn't change anything at all, but B is now pointing towards 0.

[tex]A_x=5.7[/tex] (doesn't change from above)

[tex]B_x=8.0cos0[/tex] and

[tex]B_x=8.0[/tex] so

[tex]C_x=13.7[/tex] and

[tex]A_y=5.7[/tex] (also doesn't change from above)

[tex]B_y=8.0sin0[/tex] so

[tex]B_y=0[/tex] and

[tex]C_y=5.7[/tex] and for the magnitude:

[tex]C_{mag}=\sqrt{(13.7)^2+(5.7)^2[/tex] so

[tex]C_{mag}=15units[/tex] and for the direction:

[tex]tan^{-1}(\frac{5.7}{13.7})=23[/tex] and since both x and y components of C are in Q1, we add nothing.

And you're done!!!

Answer:

The acceleration will decrease/reduce

Explanation:

Newton in his second law of motion states that the acceleration of an object is dependent on the force and mass applied on the object. Using the equation as follows:

F = m × a

Where;

F = force (N)

m = mass (kg)

a = acceleration (m/s²)

Acceleration (a) is directly proportional to the force (F) applied but inversely proportional to the mass (m).

According to this question, a friend drops 50 pounds of dog food into a cart being pushed with speed. This means that the mass/weight of the cart was increased. Since the acceleration is inversely proportional to the mass of an object, this means that the acceleration of the cart will DECREASE/REDUCE as the mass increases.

Answer:

HOPE IT HELP YOU A LOT :)

I prove it also .

Answer:

Newtons Second law of motion states that"The rate of change of momentum is directly proportional to the force applied"

AnswerIt is continuously falling towards the surface of the earth

Explanation:

since gravity from earth is the thing that keeps it constantly in orbit

Answer:

I don't know what you mean about which changes occurred in this process but if its why the dough starts rising then its caused by the carbon dioxide in baking soda and yeast which is a fungus

Answer:

When baking,flour is mixed with water,the other ingredients and yeast to form a paste called a dough.what happens is that the zymase enzyme from the yeast acts on the sugars to form carbon dioxide and alcohol.the carbon dioxide begins to form bubbles in the dough causing it to rise..

I hope this helps

Answer:

Part A would be 80 Joules and Part B would be 20 meters.

Explanation:

For Part A:

The first step is to convert the mass to SI units.

400 g = 0.4 kg

Next, we need to know that the law of conservation of energy states that the total energy of an isolated system is conserved. In this case, it means that the total energy at the bottom, where kinetic energy is greatest, will be equal to the total energy at the top, where gravitational potential energy is greatest.

Max Gravitational Potential Energy = Max Kinetic Energy

Max Gravitational Potential Energy = [tex]\frac{1}{2} mv^{2}[/tex]

Max Gravitational Potential Energy = [tex](\frac{1}{2} )(.4kg)(20m/s)^2[/tex] = 80[tex]J[/tex]

For Part B:

We need to once again set gravitational potential energy to kinetic energy, only this time we use the GPE equation and solve for height. We already solved for the kinetic energy so we just plug everything in and solve.

[tex]mgh = \frac{1}{2} mv^{2}[/tex]

[tex](.4kg)(10m/s^{2} )h = 80J\\h = 20m[/tex]

Answer:

Velocity ratio = distance travelled by effort / distance travelled by load. Which is equal to effort arm / load arm. When velocity ratio (VR) is 4, the effort arm is greater than load arm.

Answer:

658.2 nm

Explanation:

Since the galaxy is moving at relavitistic speed, we use the equation for relativistic Doppler shift of light.

So, the wavelength of light observed on the Earth is λ

λ = λ'([tex]\sqrt{\frac{ 1 + \frac{v}{c} }{1 - \frac{v}{c} } }[/tex])

where  λ' = wavelength of light emitted by galaxy = 656 nm, v = speed of galaxy = 1000 km/s (positive since the galaxy is moving away from the Earth) and c = speed of light = 300000 km/s

So, substituting the values of the variables into the equation, we have

λ = λ'(√[{1 + (v/c)}/(1 - (v/c)]

λ = 656 nm(√[{1 + (1000 km/s/300000 km/s)}/(1 - (1000 km/s/300000 km/s)]

λ = 656 nm(√[{1 + 1/300}/(1 - 1/300]

λ = 656 nm(√[{(300 + 1)/300}/{(300 - 1)/300}]

λ = 656 nm(√[{(301)/300}/{(299)/300}]

λ = 656 nm(√[301/299])

λ = 656 nm(√1.0067)

λ = 656 nm × 1.0033

λ = 658.19 nm

λ ≅ 658.2 nm

So, the wavelength observed on Earth is 658.2 nm

All the paper clips, coiled wire with nail and wrapping or coiling the wire more times are the correct answers.

All the paper clips will the wire wrapped around the nail just a few times pick up. A coiled wire with nail in the center is the electromagnet design which is most successful in picking up the most paper clips. Wrapping or coiling the wire more times around the nail make the electromagnet more stronger.

If an iron nail that was much thicker was used, it will make the magnet stronger that leads to strong electromagnetism. There are three main parts that is necessary for making a motor i.e. a rotor, a stator and a commutator.

These three parts use the attractive and repulsive forces of electromagnetism, causing the motor to spin continually as long as it receives a steady flow of electric current. Motors comprise of loops of wire in a magnetic field.

When current is passed through the loops, the magnetic field exerts a torque on the loops, which rotates the shaft that leads to the generation of electricity. Water pump, mixer and washing machine are three appliances in your house that use a motor that turns electrical energy into mechanical energy.

https://brainly.com/question/24278437

Answer:

Frequencia = 1.25 Hz

Explanation:

Dados los siguientes datos;

Para encontrar la frecuencia de la onda;

Matemáticamente, la velocidad de una onda viene dada por la fórmula;

[tex] Velocidad = Longitud \; de \; onda * Frequencia [/tex]

Haciendo de la frecuencia el tema de la fórmula, tenemos;

[tex] Frequencia = \frac {Velocidad}{Longitud \; de \; onda} [/tex]

Sustituyendo en la fórmula, tenemos;

[tex] Frequencia = \frac {50}{40} [/tex]

Frequencia = 1.25 Hz

Answer:

c) sin c /sin d

because light is moving from denser to shallower medium

b) refraction of light

Explanation:

Answer:

B. It has mass

Explanation:

The Newtons Universal gravitacion law is : F = G.[tex]\frac{m1 m2}{d^{2} }[/tex]  , where F is the force exerted , m1 and m2 are the earth's mass and the object's mass, d is the distance and G the gravitacional constant. Comparing to the options we can say that the Earth exerts a gravitational force on objects on its surface because of its mass.

Answer:

nước sôi: 440/17 l

nước 15°C:1260/17 l

Answer:

Well okay do it what's your question ?

Answer:

yes

Explanation:

Answer:

Their final relative velocity is 0.190 m/s

Explanation:

The relative velocity of the satellites, v = 0.190 m/s

The mass of the first satellite, m₁ = 4.00 × 10³ kg

The mass of the second satellite, m₂ = 7.50 × 10³ kg

Given that the satellites have elastic collision, we have;

[tex]v_2 = \dfrac{2 \cdot m_1}{m_1 + m_2} \cdot u_1 - \dfrac{m_1 - m_2}{m_1 + m_2} \cdot u_2[/tex]

[tex]v_2 = \dfrac{ m_1 - m_2}{m_1 + m_2} \cdot u_1 + \dfrac{2 \cdot m_2}{m_1 + m_2} \cdot u_2[/tex]

Given that the initial velocities are equal in magnitude, we have;

u₁ = u₂ = v/2

u₁ = u₂ = 0.190 m/s/2 = 0.095 m/s

v₁ and v₂ = The final velocities of the satellites

We get;

[tex]v_1 = \dfrac{2 \times 4.0 \times 10^3}{4.0 \times 10^3 + 7.50 \times 10^3} \times 0.095 - \dfrac{4.0 \times 10^3- 7.50\times 10^3}{4.0 \times 10^3+ 7.50\times 10^3} \times 0.095 = 0.095[/tex]

[tex]v_2 = \dfrac{ 4.0 \times 10^3 - 7.50\times 10^3}{4.0 \times 10^3 + 7.50 \times 10^3} \times 0.095 + \dfrac{2 \times 7.50\times 10^3}{4.0 \times 10^3+ 7.50\times 10^3} \times 0.095 = 0.095[/tex]

The final relative velocity of the satellite, [tex]v_f[/tex] = v₁ + v₂

∴ [tex]v_f[/tex] = 0.095 + 0.095 = 0.190

The final relative velocity of the satellite, [tex]v_f[/tex] = 0.190 m/s