Answer:
See explanation
Explanation:
Tyndall effect refers to the scattering of light in a solution. Tyndall effect occurs when the size of particles in the solution exceeds 1 nm in diameter. Such solutions are actually called false solutions.
In tincture of iodine, the size of particles in solution is less than 1 nm in diameter hence the solution does not exhibit Tyndall effect. Hence, tincture of iodine is a true solution.
Therefore, if the size of particles in solution exceeded 1nm in diameter, Tyndall effect is observed.
Question 10 of 10 A certain seed is surrounded by a sticky coating. It is fairly dense and does not float in water. How is this seed most likely spread?
A. It is dispersed by the wind, and it sprouts after it falls to the ground
B. It drops to the bottom of a body of water, where it sprouts.
C. It attaches to the fur of an animal, and it sprouts after it falls from the animal's fur.
D. Animals eat it, and it is deposited in their waste.
True or false, The universal gas constant, R, is . 0821 when we use mm Hg as our unit for pressure
Answer:
This is true.
Explanation:
R should be 0.0821
Good luck!
Uranium-235 and uranium-238 are different ________ of uranium
(Apx answers please)
Answer:
Isotopes
Explanation:
An isotope are the atoms of an element with similar chemical identity and number of protons but different atomic masses. This means that isotopes of an element differ from one another by their number of NEUTRONS.
For example, the uranium element possesses isotopes as follows: Uranium-235 and uranium-238. This two isotopes have the same chemical identity and number of protons/atomic no., which is 92. However, the atomic masses (235 and 238) are different.
Answer:
Isotopes
Explanation:
What is the meaning of salt
Answer:
a white crystalline substance that gives seawater it characteristics of taste
4. what reaction fuels the burning of the sun? A.fission B.fusion C.combustion D.transmutation
Answer:
A
Explanation:
Answer:
fusion is what fuels the burning of the sun,it's the combining of light elements into heavier elements to produce energy.the sun produces a large amount of energy by combining very light elements with heavier elements.
I hope this helps
Câu 6: Cho 4,2 gam este đơn chức no E tác dụng hết với dung dịch KOH ta thu được 4,76
gam muối natri. Vậy công thức cấu tạo của E có thể là:
hii pls help me to balance the equation thanksss
Explanation:
2KCLO3 (s) = 2KCl (s) + 3O2 (g)
Type the correct answer in the box. Express your answer to two significant figures. You are performing a reaction with 1.7 moles of hydroiodic acid and 3.43 moles of zinc bromide: 2HI + ZnBr2 → 2HBr + ZnI2. How many moles of zinc iodide can be made? The theoretical yield is moles of zinc iodide.
Answer:
1.34 34343 he did
Explanation:
i did the test
Answer:
0.85
Explanation:
In the compound Ni2O3, nickel's oxidation number is_____
oxidation number is -2.
and oxygen's
Answer:
+3
Explanation:
The name of this compound would be nickel (III) oxide. Oxygen typically has a charge of -2. Given there are 3 oxygen atoms, that would equal a charge of -6. The nickel is the cation and must equal the charge of the anion, so must have a charge of +6. Since there are 2 nickel atoms, the charge on each must be +3.
I need help with question 2
Answer:
here's the answer to your question
please hurry which statement is a scientist most likely to use in describing work
Determine the mass of oxygen in a 45.0 g sample of calcium carbonate
Answer:
The mass of oxygen in 45.0 g sample of calcium carbonate is approximately 21.58 g
Explanation:
The chemical formula for calcium carbonate is CaCO₃
The molar mass of CaCO₃ = 100.0869 g/mol
The mass of oxygen in one mole of CaCO₃ = 3 × 15.999 g = 47.997 g
The mass of oxygen in 45.0 g sample of CaCO₃, m, is goven as follows;
m = 45.0/100.0869 × 47.997 g ≈ 21.58 g
The mass of oxygen in 45.0 g sample of calcium carbonate, m ≈ 21.58 g
2. A photon of wavelength for 4 x10 -7 m strikes on the metal surface the work
function of the metal being 2.13 eV.Calculate (i)the energy of the photon in
eV(ii) the kinetic energy of the emission(iii) velocity of the photoelectron
[1ev=1.602x10-19 J]
Answer:
See explanation
Explanation:
Energy of the photon;
E = hc/λ
h= Planks constant
c= speed of light
λ = wavelength
E= 6.6 × 10^-34 × 3 × 10^8/4 x10 -7
E = 4.95 × 10^-19 J
If 1ev=1.602x10-19 J
x = 4.95 × 10^-19 J
x= 3.1 ev
From Einstein's photoelectric equation;
KE = E - Wo
Where;
KE = kinetic energy of ejected photoelectron
E= energy of the photon
Wo= work function of the metal
KE = 3.1 eV - 2.13 eV
KE= 0.97 eV
KE = 0.97 eV × 1.602x10-19 J
KE = 1.55 × 10^-19 J
KE = 1/2 mv^2
1.55 × 10^-19= 1/2 × 9.1 × 10^-31 × v^2
v= √2 × 1.55 × 10^-19/9.1 × 10^-31
v= 5.8 × 10^5 m/s
Convert the following moles to grams :)
1. 2.4 moles sulfur
2. 1.5 moles BeI2
3. 7.5 moles C6H12O6
Answer:
3
Explanation:
sky is high and I am good.
What is said to have happened to the electrons in an atom in its ground state absorbs a quantum of energy from light
Answer:
The electron from the ground state to occupy a next energy level. In this case,we say that the electron is excited
The density of water is 1 g/cm3. Brent used the following method to convert 1 g/cm3 to kg/m3. An equation is shown. The expression on the left has three terms separated by the multiplication sign. The first term is 1 g by 1 cubic cm. The second term is 1 kg by 1000 kg. The third term is 100 cm raised to the power of 3 divided by 1 m raised to the power of 3. The number on the right of the equal to sign is 1000 kg per cubic meter. (1 kg = 1,000 g and 1 m = 100 cm) What is the error in Brent's conversion method?
Answer:
The error includes;
a) The wrong denominator for the equivalent fraction of kilograms to grams
b) The use of the scale factor of length rather than the scale factor of volume for the equivalent fraction of cubic centimeters to cubic meters
c) The arrival at the correct 1000 kg/m³ rather than 0.1 g/m³ based on the expression on the left of the equation
Explanation:
The density of water = 1 g/cm³
The given equation is presented as follows;
1 g/cm³ × 1 kg/(1000 kg) × 100 cm³/(1 m³) = 1000 kg/m³
The error in the conversion method are;
a) The conversion, 1 kg/(1,000 kg) has an error, the correct conversion is (1 kg)/1,000 g)
b) The volume conversion error, 100 cm³/(1 m³), the correct volume conversion is (100 cm)³/(1 m³) = 1,000,000 cm³/(1 m³)
c) The right of the equal to sign error; using the left side expression only, the (wrong) answer is 0.1 g/m³
The correct equation is presented as follows;
1 g/cm³ × 1 kg/(1000 g) × 1,000,000 cm³/(1 m³) = 1000 kg/m³
Answer:
C. 1,000 kg should be written as 1,000 g.
Explanation:
Got it right on my test :)
what is the anode material used in the extraction of aluminium by electrolysis and why it needs to be changed at interval
Answer:
the anode material is graphite(replaceable graphite rods).
The oxygen gas burns away the anode as Carbon dioxide therefore the anode must be replaced continuously.
What species is reduced in the reaction Fe + AgNO3 → Fe(NO3)3 + Ag?
A. Agt
B. Fe
C. NO3
D. Fe3-
The species that is reduced in the reaction is Fe. Option B
The process by which an atom gains an electron, thereby lowering or decreasing its oxidation number. Basically, the positive character of the species is reduced. Reduction occurs when an atom gains one or more electrons during a chemical reaction. This means that the oxidation number decreases. This is when an atom gains an electron because electrons have a negative charge.
Acquires a negative charge that reduces the oxidation number. Reduction involves a half-reaction in which a chemical species reduces its oxidation number, usually by gaining an electron. The other half of the reaction involves oxidation in which electrons are lost. Reduction and oxidation together form a redox reaction. As the oxidation number increases, the atom is oxidized, and as the oxidation number decreases, the atom is reduced.
Learn more about The reaction here:-https://brainly.com/question/14912355
#SPJ1
Answer: Ag+
Explanation: I just took the test.
Propane can be cracked to produce propane and hydrogen. Complete the symbol equation for the reaction.
Answer:
Explanation:
C3H8= C3H6 +H2
Water glass is found in
A. Liquid form at room temperature
B. solid state at room temperature
c. semi liquid form at room temperature
D. None of above
Answer:
liquid form
Explanation:
am i right? if right like
Answer:
semi-liquid at room temperature
PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ PLZ HELP ME......
Answer:
a) clockwise
b) clockwise and
c) anticlockwise
N2 H4 (1) + O2
N2 (a) + 2H20()
PLEASE HELP ASAP!
How many grams of hydrazine (N2Ha) are needed to produce 52,4 g
water?
a 31.0
O b
b. 186
c. 32.0
d. 46.5
Answer:
d. 46.5 g
Explanation:
First, you need to start with a properly balanced equation:
N₂H₄(l) + 3O₂(g) -> 2NO₂(g) + 2H₂O(l)
Then, find the moles of water produced:
2H = 2.01568 amu
O = 15.999 amu
________________
18.01468 amu
52.4 g ÷ 18.01468 amu = 2.9087 moles
The mole ratio in our balanced formula between N₂H₄ : H₂O is 1 : 2, so divide moles of H₂O by 2 to get moles of N₂H₄
2.9087 moles ÷ 2 = 1.45435 moles of N₂H₄
Then, calculate the atomic mass of N₂H₄:
2N = 28.0134 amu
4H = 4.03136 amu
________________
32.04476 amu
Finally, calculate the mass in grams of N₂H₄:
1.45435 moles • 32.04476 amu = 46.604 g
What is the energy of a photon that emits a light of
frequency 6.42 x 1014 Hz?
A. 4.67 x 10-19 J
B. 4.25 x 10-19
C. 3.10 x 10-19 J
D. 9.69 x 10-19 J
Answer:
Option B is correct [4.25 x 10-19J]
Explanation:
Book your exam with us for 100% result
4.78×[tex]10^{-19}[/tex] J is the energy of a photon that emits light of
frequency 6.42 x[tex]10^{14}[/tex] Hz.
What is the frequency?Frequency is the rate at which current changes direction per second. The energy of a single photon is given by:
E =hν
where
E is the energy
h is the Planck constant
f is the frequency of the light
The chemical equation for the energy of a photon is given by:
E =hν , where h is the Planck constant and ν is the frequency.
E =hν = 6.626×[tex]10^{-34}[/tex] Js × 7.21×[tex]10^ {14}[/tex]
[tex]s^{-1}[/tex] = 4.78 ×[tex]10^{-19}[/tex] J
Hence, 4.78×[tex]10^{-19}[/tex] J is the energy of a photon that emits light of
frequency 6.42 x[tex]10^{14}[/tex] Hz.
Learn more about frequency here:
https://brainly.com/question/13040523
#SPJ2
Please help I have been stuck on this problem for a couple hours and can't figure it out
Answer:
11.92 Liters O₂(g) at STP
Explanation:
For most stoichiometry problems, if one will convert all given data into moles, solve by rxn ratios, then finish by converting to needed dimensions to complete problem.
2Pb(NO₃)₂ => 2PbO + 4NO₂ + O₂
Given 237.5 grams PbO formed in reaction = 237.5 g/223.2 g/mole = 1.064 mole PbO
From equation ratios, moles O₂ formed = 1/2(moles PbO) = 1/2(1.064 moles O₂) = 0.532 mole O₂
0.532 mole O₂ = 0.532 mole x 22.4 liters/mole at STP = 11.91756272 liters (calculator answer) ≅ 11.92 liters O₂ at STP (4 sig.figs. based on given 237.5g PbO)
Why does increasing the temperature make a solid dissolve faster?
- The solvent molecules bump into the solid more often.
- The solid is melted before mixing into the liquid.
- The chemical bonds of the solid are broken faster.
- The pressure of the solute on the solid is increased.
Answer:
The solvent molecules bump into the solid more often
Explanation:
Increasing the temperature makes a solid dissolve faster because the solvent molecules bump into the solid more often.
What happens when you increase the temperature of the solvent?If we heat the solvent, the average kinetic energies of its molecules increase. Hence, the solvent is able to dislodge more particles from the surface of the solute. Thus, increasing the temperature increases the solubilities of substances. For example, sugar and salt are more soluble in water at higher temperatures.
Does raising the temperature make a substance dissolve faster in a solvent?The temperature of the solvent is another factor that affects how fast a solute dissolves. Generally, a solute dissolves faster in a warmer solvent than it does in a cooler solvent because particles have more energy of movement.
Learn more about solvent here https://brainly.com/question/25326161
#SPJ2
Please help with the Volume one
Answer:
im a just achild
Explanation:
Answer:
c
Explanation:
0.5dm³
follow me if you want
2. 10.00 grams of a sample of hydrated PtCl4 are heated and lose 3.00 g of water. How many moles of water are combined with each mole of PtCl4?
Answer:
8 mol
Explanation:
Step 1: Calculate the mass of PtCl₄ in the sample
10.00 grams of a sample of hydrated PtCl₄ are heated and lose 3.00 g of water. The mass of PtCl₄ is:
mPtCl₄ = 10.00 g - 3.00 g = 7.00 g
Step 2: Calculate the moles corresponding to 7.00 g of PtCl₄ and 3.00 g of H₂O
The molar mass of PtCl₄ is 336.9 g/mol.
7.00 g × 1 mol/336.9 g = 0.0208 mol
The molar mass of H₂O is 18.02 g/mol.
3.00 g × 1 mol/18.02 g = 0.166 mol
The molar ratio of H₂O to PtCl₄ is:
0.166 mol H₂O/0.0208 mol PtCl₄ ≈ 8 mol H₂O/ 1 mol PtCl₄
Which reaction occurs at the cathode in an electrochemical cell?
A. Cu(s) → Cu2+(aq) + 2e
B. Cu2+(aq) + H2(g) → Cu(s) + 2H+(aq)
C. Cu(s) + 2H+(aq) → Cu2+(aq) + H2(g)
D. Cu2+(aq) + 2e → Cu(s)
Answer:
I could be wrong but I say it's letter b
Explanation:
I hope you have an great night
Name three metals on the periodic table and their uses
PLS HELP
the element of group 1 are reactive but those of group 18 are inert, why
Answer:
Because elements of group 1 does not have stable electronic configuration and elements of group 18 have stable electronic configuration.
Explanation:
Because elements of group 1 do not contain stable electronic configuration and elements of group 18 include stable electronic configuration.
What are the element of group 1?Group 1 elements contain the alkali metals, Li, Na, K, Rb, Cs, and Fr. The alkali metals exist all soft, shiny, and metallic when cut. They react efficiently with water, have low melting points and densities, and are good conductors of electricity. They all include one valence electron that they lose easily to form ions. Noble gas exists as any of the seven chemical elements that create up Group 18 (VIIIa) of the periodic table. The elements exist as helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn), and oganesson (Og).
The element of group 1 exist as reactive but those of group 18 exist as inert Because elements of group 1 do not contain stable electronic configuration and elements of group 18 include stable electronic configuration.
To learn more about element of group1 refers to:
https://brainly.com/question/2116245
#SPJ2
