When a gas is heated in a sealed container, the gas particles move faster and hit the sides of the container with more force leading to an increase in the pressure of the gas.
An increase in the temperature of a gas increases the collision rate of the molecules of the gas according to the kinetic theory.
With increased kinetic energy, the molecules of the gases collide more frequently with each other and the walls of the container.
The collision creates an increase in the magnitude of pressure inside the container.
More on the kinetic theory of gases can be found here: https://brainly.com/question/15354399?referrer=searchResults
Answer:
C
Explanation:
When a gas is heated in a sealed container, the gas particles move faster and hit the sides of the container with more force leading to an increase in the pressure of the gas.
describe the process to electroplating with the help of an activity
Answer:
process of depositing a thin layer of any superior metal over an object of a cheaper metal, with the help of electric current
Explanation:
I hope this help have an great day and stay health
A bedroom that measures 11 ft by 12 ft by 8.0 ft contains 35.41 kg of air at 25 C. What is the pressure of the air in the room? You may assume that the molar mass of air is 29.0 g/mole.
Answer:
9.97×10⁻⁴ atm
Explanation:
Applying,
PV = nRT............... Equation 1
Where P = pressure, V = volume, n = number of moles of air, R = molar gas constant, T = Temperature.
make P the subject of the equation
P = nRT/V............ Equation 2
From the question,
Given: V = (11×12×8) ft³ = 1056 ft³ = (1056×28.3168) = 29902.5 L, T = 25°C = (25+273) = 298 K, n = 35.41/29 = 1.22 mole
Constant: R = 0.082 atm.L/K.mol
Substitute these values into equation 2
P = 1.22×0.082×298/29902.5
P = 9.97×10⁻⁴ atm
Determinar el volumen de 20 kg de benceno si su densidad es de 0,88g/cm3
Answer:
volume = mass/ densidad
0.88g/cm3 = 880kg/m3
v=20kg/880kg/m3
v=0.02272727272
o puede ser 0.0227
o tambien puede ser 0.023
1.One gram-atom of Nitrogen is heavier than one gram-atom of Oxygen.
True or false
2.Measurements of a physical quantity. can be very precise but not accurate
True or False
Answer:
1 . statement is false
2. statement is true
hii pls help me to balance the equation thanksss
Answer:
[tex]{ \bf{2P _{(s)} + 5Cl _{2(g)} → 2PCl _{5(s)}}}[/tex]
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
[tex]\boxed{\pmb{\purple{\sf{2P(s) + 5Cl _{2}(g)\dashrightarrow 2PCl _{5}(s)}}}}[/tex]
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
what is meant by reaction element
Answer: A reaction element are those elements that can take part in a chemical reaction.
Explanation:
An element is made up of atoms that has the same atomic number. It is the basic material of which all matter is composed of. These elements cannot be broken down further into smaller substances by any chemical reaction. Each element has a unique number of protons in its atom. For example,
--> a hydrogen atom has 1 proton,
--> a Helium atom has 2 protons,
--> a Lithium atom has 3 protons, and
--> a carbon atom has 6 protons.
A chemical reaction on the other hand involves rearrangement of the constituent atoms of reactants to create different substances as products. The bonds between atoms are either broken or created to form new molecules. There are different types of chemical reaction which includes:
--> Decomposition reaction
--> Neutralization reaction
--> single displacement reaction and
--> combustion reaction.
the solubility of sugar is 250 at 60° what does it mean. please helpp anyone please help
I don't know I am having the same problem
is zinc a basic radical or acid radical?
Answer:
depends on the element it's reacting with..
Explanation:
if the another element requires less energy to loose electron then zinc will become negatively charged and hence becomes acidic radical..
normally if it is reacting with element with valency 4 and Atomic number less than it(Ti,Si,C) then it will lose electron and gain positive sign and henve becomes basic radical..
What are the metals that can displace Iron(||) from a solution
The classification of an acid or base as weak or strong is based uponGroup of answer choicesthe solubility of the acid or basethe extent of dissociation of the acid or basethe concentration of acid or base in solutionmore than one response is correct
Answer: the extent of dissociation of the acid or base
Explanation:
When an acid or base dissociates, it means that they go back to their original ions in order to be able to react with the atoms in the solution they dissociated in.
Stronger acids and bases are able to almost completely dissociate in a solution which is why they are able to react with the atoms in the solution very easily. The strength of an acid or base is therefore measured by how much dissociation they can manage in a solution.
what is bonding in chemistry
Explanation:
A chemical bond is a lasting attraction between atoms, ions or molecules that enables the formation of chemical compounds. The bond may result from the electrostatic force of attraction between oppositely charged ions as in ionic bonds or through the sharing of electrons as in covalent bonds.
if you want please give me brainliest and sir
Answer:
Check Down
Explanation:
A chemical bond is a lasting attraction between atoms, ions or molecules that enables the formation of chemical compounds. The bond may result from the electrostatic force of attraction between oppositely charged ions as in ionic bonds or through the sharing of electrons as in covalent bond.
If an atom of chlorine (CI) were to ionize, it would
electron(s).
Answer:
Explanation:
As per being a Group 7 element, it would gain one electron, which changes it's charge to 1-. It is therefore negatively charged, having a full outer shell of 8, having its electronic structure to be at 2,8,8.
When 120 g of carbon reacts completely with 320 g of oxygen the mass of carbon dioxide formed will be?
What do the solid white and red balls in this model represent?
H
H— — О
A. Planets and
the Sun
B. Electrons
C. Molecules
D. Atoms
PREVIOUS
Answer:
C. Molecules
Explanation: Water is a compound that conatins molecules hydrogen and oxygen.
Answer: Atoms
Explanation:
****URGENT****
I need help!!!
the answers are there, i need someone to explain please!
Explanation:
your answer was correct
2HNO3+ Cu O -> Cu (NO3)2 + H₂O
Answer:
it is already balanced bro
How is kilo gram is related to gram
Answer:
i know you think that they are just related because kg has kilo but they are related because
Explanation:
1000g makes 1 g.You see how much there is a difference in the solution because how is one=one thousand,well that is all i can help you from here.bye panta
Answer:
1 g=1000kg
Explanation:
They are related in mathematical way
What’s the name of this compound?
How can the percentage of air be determined
Answer:
The composition of air can be determined by an experiment which includes passing a known volume of air, measured at a known temperature and pressure, over sufficient amount heated copper granules/powder, and measuring the volume gas remaining after the gas cools down to the temperature at which the first measurement was taken
Oxygen reacts with copper according to the following chemical reaction
2Cu (s) + O₂ (g) → 2CuO (s)
Cupper does not react with the other constituents of air
Whereby the initial volume of air was 100 cm³, we have;
Percentage of oxygen in air = 100 - The final volume reading of the container initially holding the air
When done using am appropriate experimental setup, the percentage of gases remaining equals 79% to 80%, therefore, the percentage composition of oxygen in air is between 20 and 21 percent
Explanation:
I pls help me this is the question:
define the following terms below
Answer:
natural resources: materials or substances such as minerals, forests, water, and fertile land that occur in nature and can be used for economic gain.
renewable resources: a natural resource that is unlimited or that is naturally replenished rather quickly, such as sunlight or water
non renewable resources: (also called a finite resource) is a natural resource that cannot be readily replaced by natural means at a pace quick enough to keep up with consumption.
how is electrovalent bond formed ? Describe with an example .
Answer:
For example, the bond between the sodium and chlorine atoms in sodium chloride (NaCl) is formed by the transfer of an electron from sodium to chlorine, creating Na + and Cl – ions. ... The electrostatic attraction between these ions provides the bonding in NaCl.
What is the correct equilibrium constant expression for the following reaction?
2NCl3(g) Û N2g) + 3Cl2g
Answer:
K = [N2] [Cl2]³ / [NCl3]²
Explanation:
The equilibrium expression, K, of a reaction:
aA + bB ⇄ cC + dD
Is defined as the ratio between the multiplication of concentrations of products powered to its reaction coefficient and the multiplication of concentrations of reactants powered to its reaction coefficient as follows:
K = [C]^c[D]^d / [A]^a[B]^b
Now, for the reaciton:
2NCl3 ⇄ N2(g) + 3Cl2(g)
K is:
K = [N2] [Cl2]³ / [NCl3]²
A sample of helium has a temperature of 450 K. The gas is cooled to 248.9 K at which time the gas occupies 103.4 L? Assume pressure is constant at 3 atm. What was the original volume of the gas?
A. 186.94 L
B. 304.5 L
C. 57.19 L
D. 361.07 L
Answer:
[tex]\boxed {\boxed {\sf A. \ 186.94 \ L}}[/tex]
Explanation:
We are asked to find the original volume of a gas given a change in temperature. Since pressure remains constant, we are only concerned with volume and temperature, so we use Charles's Law. This states the volume of a gas is directly proportional to the temperature. The formula for this law is:
[tex]\frac {V_1}{T_1}= \frac{V_2}{T_2}[/tex]
The gas begins with a temperature of 450 Kelvin, but the volume is unknown.
[tex]\frac {V_1}{450 \ K }= \frac{V_2}{T_2}[/tex]
The gas is cooled to 248.9 Kelvin and the gas occupies a volume of 103.4 liters.
[tex]\frac {V_1}{450 \ K }= \frac{103.4 \ L}{248.9 \ K}[/tex]
Since we are solving for the original volume, we must isolate the variable V₁. It is being divided by 450 Kelvin. The inverse operation of division is multiplication, so we multiply both sides of the equation by 450 K.
[tex]450 \ K \frac {V_1}{450 \ K }= \frac{103.4 \ L}{248.9 \ K}* 450 \ K[/tex]
[tex]V_1= \frac{103.4 \ L}{248.9 \ K}* 450 \ K[/tex]
The units of Kelvin cancel.
[tex]V_1= \frac{103.4 \ L}{248.9 }* 450[/tex]
[tex]V_1= 0.4154278827 \ L *450[/tex]
[tex]V_1= 186.9425472 \ L[/tex]
Round to the nearest hundredth. The 2 in the thousandths place tells us to leave the 4 in the hundredth place.
[tex]V_1 \approx 186.94 \ L[/tex]
The original volume is approximately 186.94 liters and Choice A is correct.
Which atom is abundant in the universe
Answer:
hydrogen is abundant in nature
Convert the following absolute temperatures to centigrade.
i) 0 K
ii) 298 K
iii) 323 K
iv) 423 K
SHOW STEP BY STEP
Answer:
0 K
[tex]{ - \bf{273 \degree C}}[/tex]
298 K
[tex]{ \tt{ = 298 - 273}} \\ = { \bf{25 \degree C }}[/tex]
323 K
[tex]{ \tt{ = 323 - 273}} \\ = { \bf{50 \degree C}}[/tex]
423 K
[tex]{ \tt{ = 423 - 273}} \\ = { \bf{150 \degree C}}[/tex]
1.T=[£+273]
=273
It is because kelvin temperature is absolute zero.
Water is dipolar because:
A. It has two hydrogens, each of which pulls oxygen's electrons and separates the
charges into two areas.
B. Oxygen pulls electrons closer to itself than hydrogens, giving the oxygen a
slight negative and hydrogens a slight positive charge.
C. Oxygen pulls electrons closer to itself than hydrogens, giving the oxygen a
slight positive and hydrogens a slight negative charge.
OD. It has two hydrogens, each of which has its own polar area.
Answer:
B. Oxygen pulls electrons closer to itself than hydrogens, giving the oxygen a slight negative and hydrogens a slight positive charge.
Explanation:
In the water molecule (H2O), an oxygen atom is bonded to two hydrogen atoms. Oxygen atom is much more electronegative (has more attraction for electrons) than hydrogen atom, hence, it pulls electrons from one one of the hydrogen atoms bonded to it making it more negatively charged and the hydrogen atom, more positively charged.
The possession of positive charge (+) and negative charge (-) in the same molecule, caused by uneven flow of electrons is what it means to be DIPOLAR (from dipole). Hence, water is DIPOLAR because oxygen pulls electrons closer to itself than hydrogens, giving the oxygen a slight negative and hydrogens a slight positive charge.
A piece of sodium metal can be described as?
What general term is used to describe the pure liquid (such as a pure water) obtained in such a process
Which of the following is not a result of surface tension in water?
a. water has an unusually low vapor pressure
b. drops tend to become spherical
c. surface area is maximized
d. surface appears to have a “skin”
The option which isn't a result of surface tension in water is: c. surface area is maximized.
Water can be defined as a liquid molecule that comprises the chemical element hydrogen and oxygen in the ratio of two to one (2:1).
Surface tension can be defined as a property of liquid such as water, which makes its surface to resist an external force due to the cohesive nature of its molecules.
This ultimately implies that, the surface tension of a liquid is mainly as a result of the cohesive forces existing between its molecules.
Generally, the surface tension of water is typically higher than the surface tension of most liquids.
Due to the effect of surface tension in water;
Water has an unusually low vapor pressure due to the hydrogen bond between its molecules.Drops of liquids such as water tend to become spherical.The surface of a liquid such as water appears to have a “skin”Additionally, the surface tension of a liquid such as water can be described as an inward force which tends to minimize its surface area rather than maximize its surface area.
In conclusion, surface tension in water doesn't maximize its surface area.
Find more information: https://brainly.com/question/11348644
Do different color lights (RBG) use additive or subtractive properties to bring light of a certain color to our eyes?
Answer:
The lighting filters use subtractive properties to bring light of a color to the eye because subtractive color mixing uses white light source with a series of filter to eliminate certain wavelengths of light.
Different colour lights (RBG) uses additive properties to bring light of a certain color to our eyes.
What is color synthesis?Color synthesis is the art of forming different types of colours from small number of primary colours. The color formed is called a secondary color.
Color synthesis is carried out through the following means:
Additive color synthesis andSubtractive color synthesis.In additive color synthesis, the three primary colours lights that are combined is Red(R), Blue (B) and Green(G).
The wavelength from the various color light combine to generate white light which is visible to the eye.
Therefore, different colour lights (Red, Blue and Green) uses additive properties to bring light of a certain color(white) to our eyes.
Learn more about color synthesis here:
https://brainly.com/question/18452279
