A substance that donates a pair of electrons to form coordinate covalent bond is called

Answer:

The answer is "152 pm".

Explanation:

The bond length from the values inside the atomic radii is calculated according to the query. This would be the upper limit of a molecule's binding length.

The atomic radius of [tex]H= 37.0 \ pm[/tex]

The atomic radius of [tex]Br = 115.0 \ pm[/tex]

[tex]\text{Bond length = Atomic radius of H + Atomic radius of Br}[/tex]

                    [tex]= 37.0\ pm + 115.0 \ pm\\\\= 152\ pm[/tex]

Answer:

p'PCl3 =  6.8 torr

p'Cl2 =26.4 torr

p'PCl5 =223.4 torr

Explanation:

An equilibrium mixture of PCl5(g), PCl3(g), and Cl2(g) has partial pressures of 217.0 Torr, 13.2 Torr, and 13.2 Torr, respectively. A quantity of Cl2(g) is injected into the mixture, and the total pressure jumps to 263.0 Torr at the moment of mixing. The system then re-equilibrates. The chemical equation for this reaction is

PCl3(g) + Cl2(g) ---> PCl5(g)

Calculate the new partial pressures after equilibrium is reestablished. [in torr]

pPCl3

pCl2

pPCl5

Step 1: Data given

Partial pressure before adding chlorine gas:

Partial pressure of PCl5 = 217.0 torr

Partial pressureof PCl3 = 13.2 torr

Partial pressureof Cl2 = 13.2 torr

A quantity of Cl2(g) is injected into the mixture, and the total pressure jumps to 263.0 Torr at the moment of mixing

Step 2: The equation

PCl3(g)+Cl2(g) ⇔ PCl5(g)

Step 3: The expression of an equilibrium constant before adding chlorine gas

Kp = pPCl5 / (pPCl3 * pCl2)

Kp = 217.0 / (13.2 * 13.2)

Kp =  1.245

Step 4:  The expression of an equilibrium constant after adding chlorine gas

Partial pressure of PCl5 = 217.0 torr

Partial pressure of PCl3 = 13.2

Partial pressure of Cl2 = TO BE DETERMINED

Step 5: The total pressure of the system

Ptotal = pPCl5 + pPCl3 + pCl2

263.0 torr = 217.0 torr + 13.2 torr + pCl2

pCl2 = 263.0 - 217.0 -13.2 = 32.8 torr

Step 6: The initial pressure

The equation: PCl3(g)+Cl2(g) ⇔ PCl5(g)

pPCl3 = 13.2 torr

pCl2 = 32.8 torr

pPCl5 = 217.0 torr

Step 7: The pressure at the equilibrium

p'PCl3 = (13.2 -x) torr

p'Cl2 = (32.8 - x) torr

p'PCl5 = (217.0 + x) torr

Step 8: The equilibrium constant

'Kp =  p'PCl5 / (p'PCl3 * p'Cl2)

1.245 = (217.0+x) / ((13.2-x)(32.8-x)

x = 6.40 torr

p'PCl3 = 13.2 -6.40 = 6.8 torr

p'Cl2 = 32.8 - 6.40 =26.4 torr

p'PCl5 = 217.0 + x) 6.4 = 223.4 torr

Answer:

The answer is A. +1

Explanation:

Answer:

True

Explanation:

The reaction between Diisopropyl ether and concentrated aqueous HI forms two initial organic products as shown in the image attached.

The hydrogen of the HI becomes attached to the oxygen in the ether leading to a cleavage of the C-O bond to yield the first compound. The I^- become attached to the other moiety in the original molecule to yield the second compound as shown in the image attached.

Answer: The process by which the particles can reconvene entirely in one of the flasks is: NONSPONTANEOUS.

Explanation:

The spontaneity of a process can affect the distribution of energy and matter within the system. Different chemical or physical processes have the natural tendency to occur in one direction under a given set of conditions. For example:

--> when water is pour down a hill it naturally flows down but it requires outside energy maybe from a water pump to flow up the hill and ,

--> during an iron rust, iron that is exposed to atmosphere will corrode, but rust is not converted to iron without intentional chemical treatment.

Therefore, a spontaneous process is one that occurs naturally under certain conditions. While a NONSPONTANEOUS process, on the other hand, will not take place unless it is initiated by the continual input of energy from an outside source. A process that is spontaneous in one direction under a particular set of conditions is nonspontaneous in the REVERSE direction.

From the two flasks that where connected through a valve, once the valve was opened, the gas spontaneously becomes evenly distributed between the flasks. To reverse this, it would require an external energy making the reconvening of the particles back to the first flask a NONSPONTANEOUS PROCESS .

Answer:

low-spin complexes contain the maximum number of unpaired electrons.

Explanation:

In the crystal field theory, the magnitude of crystal field splitting and the pairing energy determines whether a complex will be low spin or high spin.

Low spin complexes often have greater magnitude of crystal field splitting energy than low spin complexes.

High spin complexes have maximum number of unpaired electrons(most of the electrons are unpaired) while low spin complexes have a minimum number of unpaired electrons in a complex(most of the electrons are paired).

Answer:

A

Explanation:

uptakw of raduoactive iofine by the thyroid gland js measurd

Solution :

Given :

Partial pressure of HCl, [tex]$P_{HCl}$[/tex] = 84.4 atm

Partial pressure of [tex]H_2[/tex], [tex]$P_{H_2}$[/tex] = 77.9 atm

Partial pressure of [tex]Cl_2[/tex], [tex]$P_{Cl_2}$[/tex] = 54.4 atm

Reaction :

[tex]$2HCl (g) \leftrightharpoons H_2(g) + Cl_2(g)$[/tex]

Using equilibrium concept,

[tex]$k_p=\frac{(P_{H_2})(P_{Cl_{2}})}{(P_{HCl})^2}$[/tex]

[tex]$k_p=\frac{77.9 \times 54.4}{(84.4)^2}$[/tex]

[tex]$k_p=0.594$[/tex]

[tex]k_p=0.59[/tex]  (in 2 significant figures)

or [tex]k_p=5.9 \times 10^{-1}[/tex]

Answer:

[tex]error = 4.0 - 3.5 = 0.5 \\ \\ percent \: error = \frac{0.5}{3.5} \times 100 \\ \\ = 14.29\% [/tex]

Answer:

[tex]\boxed {\boxed {\sf 11 \ grams \ NaCl}}[/tex]

Explanation:

We are asked to find how many grams of sodium chloride are in a solution.

Molarity is a measure of concentration in moles per liter.

[tex]molarity= \frac{ moles \ of \ solute}{liters \ of \ solution}[/tex]

We know the molarity is 0.75 molar. 1 molar is the same as 1 mole per liter, so the solution contains 0.75 moles of sodium chloride per liter.

There are 250 milliliters of solution but molarity uses liters for volume. We must convert milliliters to liters. Remember that 1 liter contains 1000 milliliters. Set up a ratio and use dimensional analysis to convert.

[tex]250 \ mL * \frac{1 \ L} {1000\ mL} = \frac{ 250}{1000} \ L = 0.250 \ L[/tex]

Now we know the molarity and the liters of solution, but the moles of solute are unknown.

Substitute the values into the formula.

[tex]0.75 \ mol \ NaCl/L = \frac{x}{0.250 \ L}[/tex]

We are solving for the moles of solute, so we must isolate the variable x. It is being divided by 0.250 liters. The inverse of division is multiplication, so multiply both sides of the equation by 0.250 L.

[tex]0.250 \ L *0.75 \ mol \ NaCl/L = \frac{x}{0.250 \ L} * 0.250 \ L[/tex]

[tex]0.250 \ L *0.75 \ mol \ NaCl/L = x[/tex]

The units of liters cancel.

[tex]0.250 * 0.75 \ mol \ NaCl[/tex]

[tex]\bold {0.1875 \ mol \ NaCl}[/tex]

Now that we have calculated the moles of solute, we must convert this to grams. We use the molar mass or the mass of 1 mole of a substance. Sodium chloride's molar mass is given and it is 58.44 grams per mole. This means there are 58.44 grams of sodium chloride in 1 mole of sodium chloride.

Set up a ratio so we can convert using dimensional analysis.

[tex]\frac {58.44 \ g \ NaCl}{1 \ mol \ NaCl}[/tex]

Multiply by the number of moles we calculated.

[tex]0.1875 \ mol \ NaCl *\frac {58.44 \ g \ NaCl}{1 \ mol \ NaCl}[/tex]

The units of moles of sodium chloride cancel.

[tex]0.1875 *\frac {58.44 \ g \ NaCl}{1}[/tex]

[tex]\bold {10.9575 \ g \ NaCl}[/tex]

The original measurements of molarity and volume have 2 significant figures, so our answer must have the same. For the number we calculated, that is the ones place. The 9 in the tenths place tells us to round the 0 up to a 1.

[tex]11 \ g \ NaCl[/tex]

There are approximately 11 grams of sodium chloride in 250 mL of a 0.75 molar solution.

Answer:

C-O: polar covalent

Mg-F: ionic

Cl-Cl: nonpolar covalent

Explanation:

Ionic bonds are formed between an atom of a metallic element and another atom of a non-metallic element. Thus, Mg-F is an ionic bond, in which Mg is the metal and F is the nonmetal.

Covalent bonds are formed between two non-metallic elements. So, C-O and Cl-Cl are covalent bonds, because C, O, and Cl are nonmetals.

In C-O, the atom of oxygen (O) has more electronegativity than the atom of carbon (C). Thus, O will attract the electrons with more strength and a difference in charge will be established between the two bonded atoms. So, this covalent bond is polar.

In Cl-Cl, both atoms have the same electronegativity because they are from the same chemical element (Cl). Thus, this bond is nonpolar.

Answer: the correct option is that batteries (do NOT require a continuous source of fuel).

Explanation:

A battery can be classified as an electrochemical cell that has the ability to produce electric current. They do NOT require a continuous supply of fuel because it contains all the reactants needed to produce electricity. Below are some examples of batteries that are commonly used:

--> Primary battery: This is a single use battery because it can't be recharged. A typical example is the dry cell.

--> Secondary battery: This type of battery can be recharged. They are used as a power source for smartphones, electronic tablets, and automobiles.

A FUEL CELL is known as a device that converts chemical energy into electrical energy. Fuel cells are similar to batteries but require a continuous source of fuel, often hydrogen. They will continue to produce electricity as long as they are constantly resupplied with reactants. Hydrogen fuel cells have been used to supply power for satellites, space capsules, automobiles, boats, and submarines.

Answer:

accumulate reaction byproducts

Explanation:

Batteries accumulate reaction byproducts.  Fuel cells are similar to batteries but require a continuous source of fuel, often hydrogen. They will continue to produce electricity as long as fuel is available. Hydrogen fuel cells have been used to supply power for satellites, space capsules, automobiles, boats, and submarines.  A battery is an electrochemical cell or series of cells that produces an electric current.

Answer:

[tex]\triangle G= -6.7 KJ/mol[/tex]

Explanation:

From the question we are told that:

Chemical Reactions:

X=A⇌B,ΔG= 14.8 kJ/mol

Y=B⇌C,ΔG= -29.7 kJ/mol

Z=C⇌D,ΔG= 8.10 kJ/mol

Since

Hess Law

The law states that the total enthalpy change during the complete course of a chemical reaction is independent of the number of steps taken.

Therefore

Generally the equation for the Reaction is mathematically given by

[tex]T = +1 * X +1 * Y +1 *Z[/tex]

Therefore the free energy, ΔG is

[tex]\triangle G=1 * \triangle G*X +1 * \triangle G*Y +1 * \triangle G *Z[/tex]

[tex]\triangle G= +1 * (14.9) +1 * (-29.7) +1 * (8.10)[/tex]

[tex]\triangle G= -6.7 KJ/mol[/tex]

Answer:

39.29 mg

Explanation:

Step 1: Calculate the partial pressure of hydrogen

The pressure of the atmosphere is equal to the sum of the partial pressures of the water and the hydrogen. (1 Torr = 1 mmHg)

P = pH₂O + pH₂

pH₂ = P - pH₂O = 758.3 mmHg - 16.5 mmHg = 741.8 mmHg

We will convert it using the conversion factor 1 atm = 760.0 mmHg.

741.8 mmHg × 1 atm/760.0 mmHg = 0.9761 atm

Step 2: Convert 19.0 °C to Kelvin

We will use the following expression.

K = °C + 273.15 = 19.0 + 273.15 = 292.2 K

Step 3: Calculate the mass of hydrogen

First, we will calculate the moles of hydrogen using the ideal gas equation.

P × V = n × R × T

n = P × V / R × T

n = 0.9761 atm × 0.47910 L / (0.08206 atm.L/mol.K) × 292.2 K = 0.01950 mol

The molar mass of hydrogen is 2.015 g/mol. The mass of hydrogen is:

0.01950 mol × 2.015 g/mol = 0.03929 g = 39.29 mg

Answer:

a. 181.5 kcal

Explanation:

Step 1: Calculate the enthalpy of the process (ΔH°).

Let's consider the following process.

CO₂(s) → CO₂(g)

We can calculate the enthalpy of the process using the following expression.

ΔH° = ∑ np × ΔH°f(p) - ∑ nr × ΔH°f(r)

ΔH° = 1 mol × ΔH°f(CO₂(g)) - 1 mol × ΔH°f(CO₂(s))

ΔH° = 1 mol × (-393.5 kJ/mol) - 1 mol × (-427.4 kJ/mol) = 33.9 kJ

According to the balanced equation, 33.9 kJ are required to sublime 1 mole of CO₂.

Step 2: Convert 986 g of CO₂ to moles

The molar mass of CO₂ is 44.01 g/mol.

986 g × 1 mol/44.01 g = 22.4 mol

Step 3: Calculate the enthalpy needed to sublime 22.4 moles of CO₂

22.4 mol × 33.9 kJ/1 mol = 759 kJ

We can convert it to Kcal using the conversion factor 1 kcal = 4.184 kJ.

759 kJ × 1 kcal/4.184 kJ = 181.5 kcal

Answer:

31.95 g

Explanation:

find the molar mass of Al(NO3)3

(Al = 27, N = 14, O = 16)

molar mass of Al(NO3)3 = 27+ (14+16×3)×3

= 213 gmol^-

mass = 213 ×0.15

= 31.95g

Answer:

50.0 moles C02

Explanation:

First write down the CORRECTLY balanced equation. NOTE: The equation you provide is incorrect.

2C2H2(g) + 5O2(g) ==> 4CO2(g) + 2H2O(g)  CORRECT EQUATION

Next, look at the stoichiometric ratio of C2H2 to CO2.  You can see it is 2 moles C2H2 produces 4 moles CO2.

Thus, 25.0 moles C2H2 x 4 moles CO2/2 moles C2H4 = 50.0 moles CO2

Answer:

The watch is 40.9 years old.

Explanation:

To know how many years old is the watch we need to use the following equation:

[tex] I_{(t)} = I_{0}e^{-\lambda t} [/tex]   (1)

Where:

[tex]I_{(t)}[/tex]: is the brightness in a time t = (1/10)I₀

[tex]I_{0}[/tex]: is the initial brightness

λ: is the decay constant of tritium

The decay constant is given by:

[tex] \lambda = \frac{ln(2)}{t_{1/2}} [/tex]   (2)

Where:

[tex]t_{1/2}[/tex]: is the half-life of tritium = 12.3 years

By entering equation (2) into (1)  we have:

[tex] I_{(t)} = I_{0}e^{-\lambda t} = I_{0}e^{-\frac{ln(2)}{t_{1/2}}t} [/tex]

[tex] \frac{I_{(t)}}{I_{0}} = e^{-\frac{ln(2)}{t_{1/2}}t} [/tex]

By solving the above equation for "t" we have:

[tex] ln(\frac{I_{(t)}}{I_{0}}) = -\frac{ln(2)}{t_{1/2}}t [/tex]

[tex] t = -\frac{ln(\frac{I_{(t)}}{I_{0}})}{\frac{ln(2)}{t_{1/2}}} = -\frac{ln(\frac{1}{10})}{\frac{ln(2)}{12.3}} = 40.9 y [/tex]

Therefore, the watch is 40.9 years old.

I hope it helps you!

Answer:

Biolage is the answer

Explanation:

Because it's price is third most

Answer:

C

Explanation:

because it remains the same

Answer:

1176 grams

Explanation:

nH2SO4 =2*6=12 mol

mH2SO4=12*98=1176 grams

Answer:

solution given:

molarity of H₂SO₄=6 M

volume=2L

no of mole =6M*2=12mole

we have

mass =mole* actual mass=12*98=1176g

the mass is 1176g.

Answer:

The new temperature of the gas is 746 K.

Explanation:

Given that,

The volume of the gas, V₁ = 117 mL

Temperature, T₁ = 100°C = 373

Final volume of the gas, V₂ = 234 mL

We need to find the final temperature. The relation between temperature and volume is given by :

[tex]\dfrac{V_1}{V_2}=\dfrac{T_1}{T_2}\\\\T_2=\dfrac{T_1V_2}{V_1}\\\\T_2=\dfrac{373\times 234}{117}\\\\T_2=746\ K[/tex]

So, the new temperature of the gas is 746 K.

Answer:

molecules of real gases occupy no volume.

Explanation:

Answer:

mountain

Explanation:

when plates move towards each other they create mountains

Answer:

C

Explanation:

b/c when copper and zinc metal are addedto solution,then the solution will be consider under redox reaction

[tex]Cu^{2+} + Zn[/tex] → [tex]Cu + Zn^{2+}[/tex] is the redox reaction. Hence, option C is correct.

A chemical reaction taking place between an oxidizing substance and a reducing substance.

The oxidizing substance is used to lose electrons in the reaction, and the reducing substance is used to gain electrons.

On the reduction potential chart, zinc is a stronger oxidizing agent than, Copper (Cu), which is a reducing agent as compared to silver

The redox reaction most likely occurs if silver and copper metal were added to a solution that contained silver and copper ions is ;

[tex]Cu^{2+} + Zn[/tex] → [tex]Cu + Zn^{2+}[/tex]

Learn more about Redox Reaction here ;

brainly.com/question/13293425

#SPJ5

Answer:

C) NH3 > PH3 > CH4

Explanation:

The boiling point of a substance depends on the nature of intermolecular interaction between the molecules of the substance. The greater the magnitude of intermolecular interaction between the molecules of the substance, the higher the boiling point of the substance.

Both NH3 and PH3 have intermolecular hydrogen bonding between their molecules. However, since nitrogen is more electronegative than phosphorus, the magnitude of intermolecular hydrogen bonding in NH3 is greater than in PH3 hence NH3 has a higher boiling point than PH3.

CH4 molecules only have weak dispersion forces between them hence they exhibit the lowest boiling point.

Answer:

1.94 × 10⁻³

Explanation:

Step 1: Calculate the concentration of H⁺ ions

We will use the definition of pH.

pH = -log [H⁺]

[H⁺] = antilog -pH = antilog -2.32 = 4.79 × 10⁻³ M

Step 2: Calculate the acid dissociation constant (Ka) of the acid

For a monoprotic weak acid, whose concentration (Ca) is 0.0118 M, we can use the following expression.

Ka = [H⁺]²/Ca

Ka = (4.79 × 10⁻³)²/0.0118 = 1.94 × 10⁻³