Answer:
[H₃O⁺] = [H⁺] = 10^-pH = 10⁻¹°⁸⁶ = 0.0138M in [H⁺]
Explanation:
By definition pH = -log[H⁺] => [H⁺] = 10^-pH = 10⁻¹°⁸⁶ = 0.0138M in [H⁺]
Using your calculator ... I am using a TI-30XA scientific calculator.
=> start by entering the number 1.86 => then press the (+/-) function => this will insert a negative symbol => -1.86,=> next find button with "2nd" printed on face (on some calculators the button is in yellow); press this button to change to 'secondary mode',=> find the symbol (10ˣ) ... the button below this symbol is usually the 'log' button, then press it => the answer of interest will show in the display window. => ...Depending on the calculator, the answer may show as 0.0138, or 1.38x10⁻², or 1.38E-2 (=1.38 x 10⁻²). It is the user's job to insert dimensional units into answer of interest => 0.0138M, or 1.38 x 10⁻²M, or 1.38E-2M.
1.38E-2 which is 1.38 x 10⁻².
An aqueous solution was prepared by dissolving 266.07 g of AgNO3 ( 169.88 g/mol) in enough water to make a total volume of 250.0 ml. What is the molarity of the solution
Answer:
The correct answer is 6.265 M.
Explanation:
To find the molarity of the solution, we first must recall that molarity represents the number of moles of solute divided by the number of liters of solution. Thus, our first step should be to convert the solute amount in grams to moles, using the given molar mass.
266.07 g * (1 mol/169.88 g) = 1.5662 mol
Now, we can find the molarity using the following formula:
Molarity = moles solute/liters solution
M = 1.5662 mol/0.25 L
M = 6.265 M
Therefore, the molarity of the solution is 6.265 M.
Hope this helps!
Acid hydrolysis of N-methylbutyramide in water and hydrochloric acid with heat produces______________________________.
a. Butyric acid and methylammonium chloride.
b. Butanoic acid and ammonium chloride.
c. Butanoate and methylamine.
Answer:
A- Butyric acid and methylammonium chloride.
Explanation:
List the four quantum numbers
Answer: In atoms, there are a total of four quantum numbers: the principal quantum number (n), the orbital angular momentum quantum number (l), the magnetic quantum number (ml), and the electron spin quantum number (ms).
Answer:
(n)
(i)
(mı)
(ms) s is suppose to be smaller than the m
Explanation:
the principal quantum number (n)
the orbital angular momentum quantum number (I)
the magnetic quantum number (ml)
the electronic spin quantum number (ms)
If there is a name/surname you can't make out due to a speaker's manner of speech, what are you supposed to do?
We can call a person by the word gentleman and Sir or from his/her real name.
If there is a name/surname you can't make out due to a speaker's manner of speech then I will call him gentleman or Sir or I will ask him his real name. Gentleman is a word that is used for noble person and Sir word is also used in order to give someone respect.
Call a person with his real name is also comes under the manner of speech so we can conclude that we can call a person by the word gentleman and Sir or from his/her real name.
Learn more about manner of speech here:
Learn more: https://brainly.com/question/26023566
What is the percentage of nitrogen in ammonium chloride (NH4Cl)?
Answer:
25%
Explanation:
Ammonium Chloride NH4CI Fertilizer-grade NH4Cl usually contains 25% N. About two-thirds of the world capacity for manufacture of this material is located in Japan, with the remaining one-third situated in India and China.
Draw and Name the Cis- isomer for the following compound:
CH3 - CH = CH - CH2 - CH3
Answer:
Cis-2-pentene or Z-2-pentene
Which example accurately describes a solution? (1 point)
Nonpolar oil molecules dissolve in water, which is polar.
Polar sugar molecules dissolve in water, which is polar.
Nonpolar fat molecules dissolve in water, which is polar.
Polar sugar molecules dissolve in oil, which is nonpolar.
The example which accurately describes a solution is; Polar sugar molecules dissolve in water, which is polar.
According to the question:
We are required to determine Which example accurately describes a solution.The formation of a solution requires that the solvent and solute be of the same polarity.
In essence, the example which accurately describes a solution is; Polar sugar molecules dissolve in water, which is polar.
Read more on solutions and polarity:
https://brainly.com/question/9485955
Answer:
Polar sugar molecules dissolve in water, which is polar.
Explanation:
I did the Exam and got it right!
a meter is defined as 100. cm. How many significant digits are there in the value
Answer:
3 significant figure
Explanation:
Trailing zeros in a number are significant ONLY is the number contains a decimal point.
So if it was 100cm with out the decimal point would only have 1 significant figure.
What types of orbitals are found in the third energy level?
Answer:
1 s-orbital, 3 p-orbital and 5 d-orbital
Answer:
there are a total of nine orbitals in a third energy level
Explanation:
Complete the balanced dissociation equation Cs2CO3
The balanced dissociation equation for Cs₂CO₃ is:
Cs₂CO₃(aq) —> Cs⁺(aq) + CO₃²¯(aq)
A dissociation equation is an equation showing the available ions present in a solution.
To obtain the dissociation equation, the compound must be dissolved in water to produce an aqueous solution.
The dissociation equation for Cs₂CO₃ can be written as follow
Cs₂CO₃(aq) —> Cs⁺(aq) + CO₃²¯(aq)
Learn more about dissociation equation: https://brainly.com/question/1903354
I NEED HELP ASAP !!!!
Answer:
5)A &D 6)B
Explanation:
Mass of Fe is 55.845 u
Mass of Cl is 35.453 u
And their sum is 91.298 u
Octane has a density of 0.703 g/ml. Calculate the mass of CO2(g) produced by burning one
gallon of octane. There are 3.79 liters to one gallon.
The mass of CO₂ gas produced during the combustion of one gallon of octane is 8.21 kg.
The given parameters:
Density of the octane, ρ = 0.703 g/mlVolume of octane, v = 3.79 litersThe mass of the octane burnt is calculated as follows;
[tex]m = \rho V\\\\m = 0.703 \ \frac{g}{ml} \times 3.79 \ L \ \frac{1000 \ ml}{L} \\\\m = 2,664.37 \ g[/tex]
The combustion reaction of octane is given as;
[tex]2C_8H_{18} + \ 25O_2 \ --> \ 16CO_2 \ + \ 18H_2O[/tex]
From the reaction above:
228.46 g of octane -------------------> 704 g of CO₂ gas
2,664.37 of octane --------------------> ? of CO₂ gas
[tex]= \frac{2,664.37 \times 704}{228.46} \\\\= 8,210.3 \ g\\\\= 8.21 \ kg[/tex]
Thus, the mass of CO₂ gas produced during the combustion of one gallon of octane is 8.21 kg.
Learn more about combustion of organic compounds here: https://brainly.com/question/13272422
What is the molarity of the nitric acid solution if 20.5 mL of a 0.125 M lithium hydroxide solution are needed to titrate a 25.0 mL sample of the nitric acid solution
Answer:: We're asked to find the molar concentration of the NaCl solution given some titration data.
Explanation:
If 9 moles of P203 are formed, how many
moles of O2 reacted?
6. The valence number of a metallic element x is 3. What is the chemical formula of its B. Nitride?
If 0.45 mole oxygen gas occupies a volume of 1.5 L, what volumes will 2.0 moles of oxygen gas occupy at the same temperature and pressure?
please don't send YouT8ube link i need a solution
Answer:
1. How many moles of oxygen will occupy a volume of 2.5 liters at 1.2 atm and 25° C? PV = V (1.2 n. 0821) (298) = 123 mols 2.
2.0 moles of oxygen gas will occupy a volume of 6.67 L at the same temperature and pressure.
Moles is a unit of measurement used in chemistry to express the amount of a substance. It is a counting unit that represents the number of particles, such as atoms, molecules, or ions, in a given sample.
One mole of a substance is defined as the amount of that substance that contains Avogadro's number of particles, which is approximately 6.022 x 10²³. This number is based on the concept that atoms, molecules, and ions are extremely small and difficult to count individually, so using moles allows for a more practical and convenient representation of quantities.
Given:
Moles of oxygen gas (initial) = 0.45 mol
Volume of oxygen gas (initial) = 1.5 L
Moles of oxygen gas (final) = 2.0 mol
Volume of oxygen gas (final) = ?
Using the principle of molar volume, we can set up the following ratio:
(0.45 mol / 1.5 L) = (2.0 mol / V)
V = (1.5 L × 2.0 mol) / 0.45 mol
V = 6.67 L
Learn more about Moles, here:
https://brainly.com/question/26416088
#SPJ6
Give reason. When the tip of a plant is cut, it does not grow tall.
Answer: The growth of the plant decides on the presence of plant hormone, auxin which develops in the roots and shoots. Auxins change the rate of elongation in plant cells, controlling how long they become. So, if the tips are removed, there is no auxin made and growth of the plant stops.
What is the molarity of a NaOH solution when 22.14 mL of 0.105 M oxalic acid is needed to
neutralize 25.0 mL of the base.
The molarity of the NaOH solution required for the reaction is 0.186 M
We'll begin by writing the balanced equation for the reaction
H₂C₂O₄ +2NaOH —> Na₂C₂O₄ + 2H₂O
From the balanced equation above,
The mole ratio of the acid, H₂C₂O₄ (nA) = 1
The mole ratio of the base, NaOH (nB) = 2
From the question given above, the following data were obtained:
Volume of the acid, H₂C₂O₄ (Va) = 22.14 mL
Molarity of the acid, H₂C₂O₄ (Ma) = 0.105 M
Volume of the base, NaOH (Vb) = 25 mL
Molarity of the base, NaOH (Mb) =?MaVa / MbVb = nA/nB
(0.105 × 22.14) / (Mb × 25) = 1/2
2.3247 / (Mb × 25) = 1/2
Cross multiply
Mb × 25 = 2.3247 × 2
Mb × 25 = 4.6494
Divide both side by 25
Mb = 4.6494 / 25
Mb = 0.186 MTherefore, the molarity of the base, NaOH solution is 0.186 M
Learn more: https://brainly.com/question/25739717
Which element represents magnetic properties?
Answer:Demagnetizing a magnet is also possible. Only a few substances are ferromagnetic; the most common ones are iron, cobalt and nickel and their alloys. The rare-earth metals neodymium and samarium are less common examples.
Explanation;
periodicity in chemical properties is based on atomic structure." explain.
Answer:
Periodicity is caused by regular and predictable variations in element atomic structure. ... The rows in the periodic table (the periods) reflect the filling of electrons shells around the nucleus, so when a new row begins, the elements stack on top of each other with similar please help me rank up
Periodicity means the repeating trends in properties of elements in a regular interval. Precocity in chemical properties depends on the atomic structure because, the size, number of electrons, etc affects their reactivity.
What is periodicity?Periodicity is the repetition in in trends in properties after a regular interval. In periodic table, all the elements are classified into different groups and periods.
Groups are vertical columns containing elements of same number of valence electrons and similar chemical and physical properties. Periods are horizontal rows where elements are arranges in the increasing order of atomic number.
Along a period the atomic size decreases, ionization energy and electronegativity increases. But down a group just the reverse for this happens.
In a chemical reaction only valence electrons are participating and the size and number of valence electrons etc affects the chemical reactivity of elements. That's why it is said like periodicity in chemical properties is based on the atomic structure.
To find more on periodicity, refer here:
https://brainly.com/question/16061498
#SPJ2
using the formula F=ma, what force is required to accelerate a car weighing 642 kg at 13 m/s2
REALLY NEED HELP RN
HELP ME ?
PLEASE!??
Answer:
8,346 kmxm/s2
Explanation:
this is physics not chem but you just multiply 13 by 642 to get 8,346. also I'm sorry but it's easy
Of the following, ________ is the most volatile. Select one: C2F6 C2H6 C2I6 C2Cl6 C2Br6
Answer:
C2Br6
because bromine is a liquid volatile
According to the forces of attraction and boiling point C₂Br₆ is most volatile as its boiling point is very low.
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/14365107
#SPJ2
The frequency light of 3.52*10-7
Answer:
The speed of light, c, equals the wavelength, λ (pronounced lambda), times the frequency, ν, (pronounced noo).
c=λν
c is a constant. It is usually given as 3.00×108 m/s or 3.00×1010 cm/s rounded to three significant figures.❤
Which functional group does the molecule below have?
Answer:
B
Explanation:
We can see here that the functional group that the molecule have is: B. Carbonyl
What is a functional group?A functional group is a specific group of atoms or bonds within a molecule that is responsible for the characteristic chemical reactions and properties of that molecule. Functional groups are the parts of organic molecules that determine their reactivity and the types of chemical reactions they can undergo.
In organic chemistry, functional groups play a crucial role in understanding the structure and behavior of molecules. Different functional groups confer distinct properties to molecules, influencing their physical properties, solubility, acidity or basicity, and interactions with other molecules.
Learn more about functional group on https://brainly.com/question/10058230
#SPJ2
A 0.1 M NaCl solution and a 0.2 M glucose solution are separated by a membrane that is impermeable to these solutes but is permeable to water. What will happen
nothing will happen
if you calculate the water potiential for both solutions
you get 2(0.1)(R)(T) and 1(0.2)(R)(T)
which is the same thing, so its isotonic.
What are the two elements sand is made of? *
Answer:
tiny crystals of the mineral quartz, which is made out of silica and oxygen
Well, much of the world's sand is made out of the same stuff, tiny crystals of the mineral quartz, which is made out of silica and oxygen, the two most common elements in Earth's crust.
Electrical bonding refunding quick check!!
A team wants to understand the effects of molecular weight on boiling point. The team has access to five substances with
different molecular weights and the time to measure 50 boiling points. How can the team make the best use of the laboratory
testing time? (1 point)
O by taking 10 measurements of each of the five liquids and using the highest value from each set
O by taking 10 measurements of each of the five liquids and finding an average
O by taking measurements of the liquids one at a time, making sure that the correct results are achieved before
moving on to another liquid
O by taking one measurement of each liquid and then working to improve the least certain liquid in the group
Answer:
1. More data should be collected to get a more reliable average
2. A boiling point at 1.5 atmospheres could be predicted fairly well
3. The actual boiling point is probably between 34 C and 40 C
4. By taking 10 measurements of each of the five liquids and finding an average
5. The thermometer being used might need to be recalibrated
Explanation:
Took the quick check
What is important about the properties of a substance that has undergone a chemical
change?
The substances created during chemical reactions, on the other hand, do not simply revert to their initial state. The most essential thing to remember is that the makeup of a material does not change when it undergoes a physical change, but it does change when it undergoes a chemical change.
Answer:
the most important thing for you to remember is that in a physical change composition of a substance does not change and in a chemical change the composition of a substance does change
If the vapor pressure of water at 20.0 o C is 17.535 torr, and the atmospheric pressure measured by a barometer was 757.3 torr, what is the partial pressure of H2 in the gas mixture in a buret
Answer:
f the vapor pressure of water at 20.0 o C is 17.535 torr, and the atmospheric pressure measured by a barometer was 757.3 torr, what is the partial pressure of H2 in the gas mixture
Partial pressure of H2 in gas mixture is :
739.765 torr .
Explain total pressure?The overall pressure ptot is the total of all pressures in a reference system. This pressure, according to Bernoulli (see Fluid mechanics), consists of the static pressure p, the dynamic pressure pdyn, and the geodetic component ( g z) that exists in a fluid along a stream line in a frictionless flow.The total pressure of a gas mixture is the sum of its component gases' partial pressures: Ptot = ∑Pi = P1 + P2 + P3... ntot = total number of moles in the gas mixture (the sum of all ni).Total pressure of mixture =
Partial of hydrogen + Partial pressure of oxygen
Partial of Hydrogen = Total pressure - partial pressure of oxygen
Here total pressure = 757.3 torr
Partial pressure of oxygen = 17 . 535 torr
Total pressure = 757 . 3 - 17 . 533
= 739.765 torr.
To learn more about total pressure refer to :
https://brainly.com/question/22264785
#SPJ2
milk is heterogeneous mixture why
Answer:
Milk is essentially a colloidal dispersion of fat in water. ... However, the fact remains that the fat and water components cannot be mixed together from a solution. There are therefore, two distinct immiscible liquid phase's present, which is why it is a heterogeneous mixture.
