Answer:
Average density of the liquid = 0.992 g/mL
Explanation:
Density = mass/volume
mass of liquid = (mass of liquid + mass of cylinder) - mass of cylinder
Trial 1: mass of liquid = 19.731 - 9.861 = 9.87
volume of liquid = 10 mL
density of liquid = 9.87 g / 10 mL = 0.987 g/mL
Trial 2: mass of liquid = 19.831 - 9.861 = 9.97
volume of liquid = 10 mL
density of liquid = 9.97 g / 10 mL = 0.997 g/mL
Trial 3: mass of liquid = 19.831 - 9.861 = 9.97
volume of liquid = 10 mL
density of liquid = 9.97 g / 10 mL = 0.997 g/mL
Trial 4: mass of liquid = 19.771 - 9.861 = 9.91
volume of liquid = 10 mL
density of liquid = 9.91 g / 10 mL = 0.991 g/mL
Trial 5: mass of liquid = 19.751 - 9.861 = 9.89
volume of liquid = 10 mL
density of liquid = 9.89 g / 10 mL = 0.989 g/mL
Average density = (0.987 + 0.997 + 0.997 + 0.991 + 0.989)/5 = 4.961/5
Average density of the liquid = 0.992 g/mL
Consider a disubstituted aromatic compound. The parent name is benzene and there is a chloro and bromo substituent. Disubstituted benzenes can be described using the terms ortho, meta and para, depending on their relative distance from each other. The terms are often just abbreviated as o, m and p. In addition, the IUPAC name can use locant numbers instead of the descriptor. Br
Select the correct names for the structure.
1. 1-bromo-3-chlorobenzene
2. 3-bromo-1-chlorobenzene
3. meta-bromochlorobenzene
4. o-bromochlorobenzene
5. ortho-bromochlorobenzene
6. m-bromochlorobenzene
Answer:The correct names for the structure are:
--> 1. 1-bromo-3-chlorobenzene.
--> 3. meta-bromochlorobenzene.
--> 6. m-bromochlorobenzene.
Explanation:
Benzene is the simplest member of the aromatic hydrocarbons. It has a ring structure consisting of six carbon and six hydrogen atoms. This equally means that a benzene can have up to six substituents. One of the chemical properties is that benzene and other members of its series undergo substitution reaction whereby one or more of its six hydrogen atoms is replaced by monoatomic reagents.
Disubstituted benzene consists of two substituents which are described based on either numerical locants or specific words for the three possible forms.
The numerical locant method are used the same naming substitutes of other hydrocarbons. From the question, the numerical locant method was derived through using the following steps:
--> the functional group is benzene
--> there are two substituents which includes bromine( written as bromo) and chlorine ( written as chloro)
--> while placing the number, it's done alphabetically ('1-bromo' comes before '3-chloro') in a clockwise manner. This is to give chorine the lowest locant number.
The second naming method for a disubstituted benzene is the the ortho-, meta-, para- (or their singel letter equivalent) nomenclature method. This is only used for benzene structures.
--> ortho or O : this is used when the substituents are close to each other in the benzene ring.
--> meta or (m) : This is used when the substituents are separated by one carbon in the benzene ring.
--> para or (p): This is used when the substituents are across each other in the benzene ring
From the question, the bromine substituent is separated from the chlorine by one carbon atom, therefore it's meta-bromochlorobenzene or m-bromochlorobenzene.
What is a personal factor of resilience?
A. Feeling of belonging
B. Family and friends
C. Genetics
D. Coping Mechanisms
Answer:
B
Explanation:
B is a personal factor of resilience
Which climate is a subcategory of polar climate
A ice cap
B subarctic
C highlands
D humid continental
Answer:
Ice cap
Explanation:
See its polar so like north pole and north pole is ice cap.
Answer:
Ice cap
Explanation:
What is the mass of 5 liters of fluorine (F2) gas at STP?
Answer:
The molar density of any ideal gas at STP is:
1 mol / 22.4 L = 0.04464 mol / L
The molar mass of F2 is: 2(19) = 38 g/mol
0.04464 mol / L * (38 g / mol) = 1.70 g/L
Explanation:
How many atoms are in 4 moles of oxygen?
Using Avogrado's constant (6.022e23):
4(6.022e23) = 2.41e24
Mercury is the only metal that is a liquid at room temperature. When mercury vapor is inhaled, it is readily absorbed by the lungs, causing signifiant health risks. The enthalpy of vaporization of mercury is 59.1 kJ/mol. The normal boiling point of mercury is 357°C. What is the vapor pressure of mercury at 43°C? Assume the enthalpy of vaporization does not depend on temperature.
Answer:
P = 0.0166 mm Hg
Explanation:
To solve this question, we need to use the Clausius Clapeyron equation, which is a commonly used expression to calculate vapour pressure at a given temperature. We have the enthalpy of vaporization of the mercury, so, let's write the equation:
Clausius Clapeyron equation:
Ln (P₂ / P₁) = (-ΔHv / R)(1/T₂ - 1/T₁) (1)
Where:
R: universal constant of gases (8.314 J / K.mol)
P₂: Vapour pressure at 43°C (or 316 K)
P₁: Pressure of mercury at the boiling point (1 atm)
T₂: temperature at 43 °C
T₁: Boiling point of mercury (357 °C or 630 K)
As we are given the boiling point of the mercury, we can safely assume that the pressure at this point is 1 atm, becuase remember that when a sustance boils, is because it's internal pressure has reached the atmospherical pressure of 1 atm. With this clear, all we just need to do is solve for P₂. We are going to do this very slowly so you can understand the process. First let's replace the given data:
Ln (P₂ / 1) = (-59100 J/mol / 8.314 J / K.mol) (1/316 - 1/630)
Ln P₂ = -7108.49 * (3.16x10⁻³ - 1.59x10⁻³)
Ln P₂ = -7108.49 * (1.51x10⁻³)
Ln P₂ = -10.7338
P₂ = 10⁽⁻¹⁰°⁷³³⁸⁾
P₂ = 2.18x10⁻⁵ atm
We can express this value in mm Hg and it will be:
P₂ = 2.18x10⁻⁵ * 760
P₂ = 0.0166 mm HgHope this helps
The value of the rate constant for a gas phase reaction can be changed by increasing the A. temperature of the reaction vessel. B. volume of the reaction vessel. C. pressure of the reactant. D. amount of product.
Answer:
temperature of the reaction vessel
Explanation:
temperature of the reaction vessel
The value of the rate constant for a gas phase chemical reaction can be changed by increasing the: A. temperature of the reaction vessel.
What is the rate constant?In Chemistry, rate constant is typically used with rate law to tell the reaction rate or rate of a chemical reaction that is affected by activation energy.
The rate law equation.Mathematically, the rate law is given by this formula:
[tex]R = k[A]^x[B]^y[/tex]
Where:
k is the rate constant.A is the concentration of reactant A.B is the concentration of reactant B.Generally, the value of the rate constant for a gas phase chemical reaction can be changed by increasing the temperature of the vessel (container) that is used in conducting the chemical reaction.
Read more on rate constant here: brainly.com/question/24749252
Carbon dioxide non examples? Please and catalyst non examples?
Answer:
I guess you mean by non element example. Non element examples have more than one elements. Carbon dioxide is a non element example since caebon dioxide has 2 oxygen atoms + 1 carbon atom = carbon dioxide.
I think catalyst is also a non element example because catalyst is inorganic which means that it is not a living thing. Since catalyst is in brass and brass is a non element example, I think catalyst is also a non element example.
Hope that helps, thank you !!
Which of the following notations represents an alpha particle?
A. 2 He
C.B+
В. В
D. Y
Answer:
A. 2 He
Explanation:
The notation of an alpha particle is depicted as:
₂He
An alpha particles is a nucleus of 2 protons and 2 neutrons. So it is actually a Helium cation.
Alpha particles are monoenergetic and they mostly have discrete energy.
So, the mass number of the particle is 4 and atomic number is 2
Help pls!!!!!!!!!!!!!!!!!!!!!!!
Answer:
D a compound
Explanation:
How many grams of moles are in 94.2 g of C02?
Answer:
Moles to grams carbon dioxide
1 mole is equal to 1 moles Carbon Dioxide, or 44.0095 grams.
Explanation:
Moles to grams carbon dioxide
1 mole is equal to 1 moles Carbon Dioxide, or 44.0095 grams.
Which orbital is partially filled in the Zirconium (ZI) atom?
Answer:
4d orbital.
Explanation:
Hello!
In this case, since zirconium's atomic number is 40, we fill in the electron configuration up to 40 as shown below:
[tex]1s^2,2s^2,2p^6, 3s^2,3p^6,4s^2,3d^{10},4p^6,5s^2,4d^2[/tex]
Thus, the orbital 4d is partially filled.
Best regards!
How many moles of
salt (NaCl) is 28.7
grams?
Answer:
0.491 mol NaCl
Explanation:
Convert from grams to moles using the molar mass of NaCl:
28.7 g NaCl x 1 mol NaCl/58.44 g NaCl = 0.491 mol NaCl
The molar mass (58.44 g) can be found from adding the molar masses of the individual elements (Na and Cl); the g NaCl will cancel out (dimensional analysis), leaving you with mol NaCl.
The dissolution of water in octane (C8H18) is prevented by ________. The dissolution of water in octane (C8H18) is prevented by ________. hydrogen bonding between water molecules ion-dipole attraction between water and octane molecules repulsion between like-charged water and octane molecules dipole-dipole attraction between octane molecules London dispersion forces between octane molecules
Answer:
London dispersion forces between octane molecules
Explanation:
Water is a polar solvent and the molecules of water are held together by hydrogen bonds.
On the other hand octane is a nonpolar molecule held together only by weak dispersion forces.
We know that the interaction of substances depend on the nature of intermolecular forces present in each substance. As a result, water can not interact with octane because octane molecules predominantly have a different kind of intermolecular force between them- the London dispersion forces.
how many NaF is 4.50 mol
For the reaction of reducing benzil (MW 210.23 g/mol) with sodium borohydride (MW 37.83 g/mol), if 2.56 g of benzil and 0.38 g of sodium borohydride were used to make hydrobenzoin (MW 214.26 g/mol), and 2.22 g of hydrobenzoin was obtained, which chemical is limiting reagent
Answer:
NaBH₄
Explanation:
First, we need to write the chemical formula of all the compounds:
Benzil: C₁₄H₁₀O₂
Sodium Borhydride: C₁₄H₁₀O₂
Hydrobenzoin: C₁₄H₁₄O₂
Now, let's write the reaction that is taking place and write all the products:
C₁₄H₁₀O₂ + 2NaBH₄ + 2H₂O -----------> C₁₄H₁₄O₂ + 2BH₃ + 2NaOH
We can see that the reaction is already balanced, so we don't need to do anything else.
The question of this exercise is to determine the limiting reagent of the reaction, in other words, the reagent that controls the reaction and produces the 2.22 g of the hydrobenzoin. And to know this we need to see the mole ratio in both reactants, and compare them to the given moles (That can be obtained with the given masses and MW)
According to the above reaction, we have a mole ratio of 1:2, so, let's calculate the moles of benzil and the borohydride, and see which of them is the limiting reactant:
moles C₁₄H₁₀O₂ = 2.56 / 210.23 = 0.0122 moles
moles NaBH₄ = 0.38 / 37.83 = 0.01 moles
moles C₁₄H₁₄O₂ = 2.22 / 214.26 = 0.0103 moles
We have the moles of every species, now, let's see the mole ratio
If 1 mole of C₁₄H₁₀O₂ -----------> 2 moles of NaBH₄
Then 0.0122 moles C₁₄H₁₀O₂ ----------> X moles of NaBH₄
Solving for X:
X = 0.0122 * 2 / 1 = 0.0244 moles of NaBH₄ are required.
However, we only have 0.01 moles of NaBH₄, and we need so much more of this to completely react with the moles of the benzil. Therefore we can safely assume that the limiting reagent is the NaBH₄
Another data that we can use for this, is the fact the produced moles were 0.0103, and this value is nearest to the moles of NaBH₄ rather than the moles of the benzil.
So, in conclusion, Limiting reagent NaBH₄Hope this helps
Rank the following elements in INCREASING Atomic Radius: Fe, Ni, K, Ti (SMALLEST TO
LARGEST)
a. Ti, Ni, Fe, K
b. Ni, Fe, Ti, K
c. Fe, Ti, K, Ni
d. K, Ti, Fe, Ni
Answer:
b. Ni, Fe, Ti, K
Explanation:
The given elements are present in period 4 of periodic table. Now we will discuss the trend of atomic radius along period.
Atomic radius:
" It is the smallest distance from nucleus to the outer most valance shell of an atom"
When we move from left to right in the periodic table the number of valance electrons in an atom increase. The atomic size goes to decrease in same period because of edition of electron with in the same shell. When the electron are added, at the same time protons are also added in the nucleus. In this way positive charge is also going to increase and this charge is greater in effect than the charge of electrons. This effect causes the greater nuclear attraction. The electrons are pull towards the nucleus and valance shell come closer to the nucleus.
As a result of this greater nuclear attraction atomic radius decreases and ionization energy increases because it is very difficult to remove the electron from atom and more energy is required.
Ni ∠ Fe ∠ Ti ∠ K
How many atoms are in 0.580 moles of CO2?
Answer:
[tex]1.05x10^{24}atoms[/tex]
Explanation:
Hello!
In this case, according to the definition of the Avogadro's number, it is possible to realize that one molecule of CO2 contains 3 moles of atoms, one of carbon and two of oxygen, thus, we have:
[tex]0.580molCO_2*\frac{3mol\ atoms}{1molCO_2} =1.74mol\ atoms[/tex]
Then, we use the Avogadro's number to obtain:
[tex]1.74mol\ atoms*\frac{6.022x10^{23}atoms}{1mol\ atoms} \\\\1.05x10^{24}atoms[/tex]
Best regards!
How many molecules are in 97.21 grams of Sodium Chloride (NaCl)?
A 8.15 g sample of hydrogen peroxide (H2O2) decomposes to form water and oxygen. The temperature and pressures conditions in the lab were 21.2oC and 761.4 torr, respectively. The oxygen gas is collected over a sample of water at 21.2oC; the vapor pressure of water at that temperature is 18.9 torr. When the water level inside and outside of the tube is equal the volume of gas is recorded as 176.23 mL. a) Write and balance the equation for the decomposition reaction
Answer: [tex]H_2O_2\rightarrow H_2+O_2[/tex]
Explanation:
Decomposition is a type of chemical reaction in which one reactant gives two or more than two products.
According to law of conservation of mass, mass can neither be created nor be destroyed. Thus the number of atoms of each element must be same on reactant and product side. Thus chemical equations are balanced.
The balanced equation for the decomposition reaction of hydrogen peroxide is:
[tex]H_2O_2\rightarrow H_2+O_2[/tex]
Decomposition is a type of chemical reaction in which a chemical breaks into two or more molecules or atoms. One reactant breaks into two products which can be shown as:
XY----->X + Y
The decomposition reaction of hydrogen peroxide can be written as:
[tex]H_{2}O_{2} = H_{2} + O_{2}[/tex]
According to the mass conserving law the mass can neither be added nor deleted they can just get transferred. For a reaction to be stable the number of atoms on both sides of the reaction should be balanced.Therefore, the balanced chemical reaction of decomposition of hydrogen peroxide will be:
[tex]H_{2}O_{2} = H_{2} + O_{2}[/tex]
To learn more about decomposition reaction follow the given link:
https://brainly.com/question/8009068
When determining the density of a grape, a student was not careful when putting the grape into the graduated cylinder, and some of the water got splashed out. How would that affect the determined density of the grape? In other words, is the calculated density be higher or lower than the actual density of the grape? Explain your answer (fill in the blanks below).
If some of the water got splashed out, the measured “grape + water” volume is incorrectly ______________________ (high or low?).
Then the calculated volume of the grape (“grape+water” – “water only” volume) is incorrectly _______________ (high or low?).
When calculating the density, the mass is divided by a (higher or lower?) ______________ value. As the result, the determined density is erroneously (high or low?) _____________ and therefore the determined density is (higher or lower?) ______________than the actual density of the grape.
Answer:
gtjgyjtjyjjjjk
Explanation:
in what way are these flowers similar from one another?
Answer:
do you have names or pictures?
Explanation:
50 points Two waves combine with constructive interference. What must be true of the
combined wave that forms?
A. It has a lower frequency than that of the original waves.
B. It has a higher amplitude than that of the original waves.
C. It has a higher frequency than that of the original waves.
D. It has a lower amplitude than that of the original waves.
Answer:B
Explanation:
Maybe
Answer:B is correct
Explanation:
Choose the correct statement regarding the behavior of water.Group of answer choicesThe heat capacity of liquid water is greater than the heat capacity of solid ice.The water phase with the smallest temperature increase when adding 10 kcal of heat is solid ice.Ice has a higher density than liquid water and therefore sinks.The water phase with the smallest temperature increase when adding 10 kcal of heat is gas vapor.The heat capacity of gas vapor is greater than the heat capacity of liquid water.
Answer:
The water phase with the smallest temperature increase when adding 10 kcal of heat is solid ice.
Explanation:
The rest of the statements are incorrect. The density of ice is lower than the density of water. The heat capacity of solid ice is greater almost twice the heat capacity of the liquid water. The heat capacity of vapors is less than heat capacity of liquid.
The image shown here is a good illustration of which law?
Answer:
3rd law
Explanation:
His third laws states that every action has an equal and opposite reaction. because you are putting force on your wall, the wall is giving the force of wall on your finger.
PLEASE HELP it’s due in 30 minutes
Answer:
1-6
3 1 3 3 2 2
Explanation:
Question 7 (1 point)
Order the levels of organization from smallest to largest.
11. Organism
1 2. Cell
13. Organ System
1 4. Organ
1 5. Tissue
What are the chemical symbols for the elements calcium carbon and chlorine respectivly
Answer:
Explanation:
Calcium is Ca
Carbon is C
Chlorine is Cl
what is the substance? cdH) (Η) (Η
(H)C
cco
Ή) (Η
Η
Η
Answer:
A substance is a pure single form of matter. It cannot be separated into other kinds of matter by any physical process.
Explain how the processes of photosynthesis and respiration are related to each other
Answer:
Explanation:
The end product of Photosynthesis is glucose that is used in cellular respiration to make ATP. The glucose is then turned back into carbon dioxide, which is used in photosynthesis. While water is broken down to form oxygen during photosynthesis, in cellular respiration oxygen is combined with hydrogen to form water.
