Answer:
An archer's stretched bow.
Explanation:
Elastic potential energy is energy stored as a result of applying a force to deform an elastic object.
Why is it that the decomposition of nitroglycerin can result in so
much more volume than the decomposition of sodium azide?
Answer:
with the molecular formula C3H5(ONO2)3, has a high nitrogen content (18.5 percent) and contains sufficient oxygen atoms to oxidize the carbon and hydrogen atoms while nitrogen is being liberated, so that it is one of the most powerful explosives known.
Explanation:
NTG reduces preload via venous dilation, and achieves modest afterload reduction via arterial dilation. These effects result in decreased myocardial oxygen demand. In addition, NTG induces coronary vasodilation, thereby increasing oxygen delivery.
The decomposition of nitroglycerin can result in so much more volume than the decomposition of sodium azide nitroglycerin contains a lot of nitrogen (18.5%) and has enough oxygen atoms.
What is volume?A measurement of three-dimensional space is volume. It is frequently expressed quantitatively using SI-derived units, like the cubic metre or litre, or different imperial or US-standard units, including the gallon, quart and cubic inch. Volume and length (cubed) have a symbiotic relationship.
The total volume much a container is usually thought of as its capacity, not as the amount of space it takes up. In other words, the volume is the quantity of fluid (liquid or gas) that the container may hold. The decomposition of nitroglycerin can result in so much more volume than the decomposition of sodium azide nitroglycerin contains a lot of nitrogen (18.5%) and has enough oxygen atoms for the nitrogen to be liberated while also oxidising the hydrogen and carbon atoms.
Therefore, the decomposition of nitroglycerin can result in so much more volume than the decomposition of sodium azide nitroglycerin contains a lot of nitrogen (18.5%) and has enough oxygen atoms.
To know more about volume, here:
https://brainly.com/question/23477586
#SPJ2
Scientists often need a catalyst to start a chemical reaction. They need to apply heat, acids, or other materials to jump-start the experiment.
Which phrase is the best definition of catalyst?
A. something hot
b. something acidic
c. something that triggers
d.something that is scientific
Answer:
something that triggers
Explanation:
a catalyst helps move a reaction along
A catalyst shows some specificity in its action. It speeds up only a spontaneous reaction. The best definition of catalyst is something that triggers. The correct option is C.
What is a catalyst?A substance which increases the rate of a chemical reaction without itself undergoing any permanent change chemically or quantitatively is defined as the catalyst and the phenomenon is called catalysis.
It is believed that a catalyst actually participates in the chemical reaction that is speeds up. It forms temporary bonds with the reactants yielding an intermediate activated complex.
A typical example of catalyst is iron (Fe) which is used in the Haber process for the manufacture of ammonia. The catalyst is recovered unchanged in amount and chemical composition at the end of the reaction.
In most cases, a small amount of a catalyst can speed up reaction between large amounts of reactants. A catalyst shows maximum efficiency at optimum temperature.
Thus the correct option is C.
To know more about catalyst, visit;
https://brainly.com/question/1565029
#SPJ6
Based on what you know, which element would you predict would most likely form an anion?
A. iron
B. tin
C. calcium
D. chlorine
Answer:chlorine
Explanation:
Anions are ions of non metals and the only non mental in that list is chlorine (group 7)
Describe how PERIODS and GROUPS are set up on the Periodic Table of Elements.
Answer:
Periods are horizontal rows (across) the periodic table, while groups are vertical columns (down) the table. Atomic number increases as you move down a group or across a period.
(Love your pfp btw)
Explanation:
HELPPPPPPPPPPP HELPPPPP HELP
Answer:
calcium chloride and water
Explanation:
the reaction absorbed energy which means endothermic
please help asap 10 & 11
Answer:
false
Explanation:
because if one of the p-protein of one is less then then the eyecolor will be different
Something that is made out of natural resources for human use is called
Answer: Man Made Resources?
Explanation: Its when humans create their own things.
1. Ammonia gas occupies a volume of 450. ml at a pressure of 720, mm Hg. What
volume will it occupy at standard pressure?
Answer:
720+450 = 1170 it's 1170
426.32mL (rounded)
The formula for finding V2 is P1 • V1/P2 and since standard pressure (1atm) is equal to 760 P2 would be 760.
720mmHg • (450mL/760mmHg) = 426.32mL
The door to the classroom weighs 3 kg. How much work is done when Michael pushes on
the door to the classroom with 15 Newtons of force, pushing the door 1.3 meters?
Work done : 19.5 J
Further explanationGiven
F = 15 N
d = 1.3 m
m = 3 kg
Required
Work done
Solution
Work is the product of force with the displacement of objects.
Can be formulated
W = F x d
W = Work, J, Nm
F = Force, N
d = distance, m
Input the value :
W = 15 N x 1.3 m
W = 19.5 J
the mass has no effect on this problem
Write the formula: carbon hexabromide
Answer: C2Br6
Explanation:
WILL GIVE BRAINLIEST
Select all the correct answers.
Which of these are examples of mixing and separating?
removing seed casings from grains
a soda bottle bubbling when it is opened
a bright copper statue turning green from weathering
removing salt from seawater
water decomposing to oxygen and hydrogen
Answer:
Removing seed casings: separatingSoda bottle bubbling when opened: mixing as before it was opened nothing was happening but as it came in contact with atmosphere it started to bubble.
Bright copper statue turning green from weathering: mixing as all vapors and gases in atmosphere combined with copper of that statue they started to change color of statue
Removing salt from seawater: obviously removing as one component Water decomposing: obviously separating as it's constituent elements are removed from compound and converted into individual elements
What is the sequence of coefficients that will balance the following decomposition reaction of dihydrogen monosulfide? H₂S ----> H₂ + S₈
8 S
In this case you must start balancing the sulfur to have 8 on each side of the reaction. So:
Answer:
Explanation:
The law of conservation of matter states that since no atom can be created or destroyed in a chemical reaction, the number of atoms that are present in the reagents has to be equal to the number of atoms present in the products.
Then, you must balance the chemical equation. For that, you must first look at the subscripts next to each atom to find the number of atoms in the equation. If the same atom appears in more than one molecule, you must add its amounts.
The coefficients located in front of each molecule indicate the amount of each molecule for the reaction. This coefficient can be modified to balance the equation, just as you should never alter the subscripts.
By multiplying the coefficient mentioned by the subscript, you get the amount of each element present in the reaction.
Then, taking into account all of the above, you can determine the amount of elements on each side of the equation:
Left side: 2 H and 1 S
Right side: 2 H and 8 S
In this case you must start balancing the sulfur to have 8 on each side of the reaction. So:
8 H₂S → H₂ + S₈
Now the amount of elements on each side of the equation:
Left side: 16 H and 8
Right side: 2 H and 8 S
Now you need to start balancing the hydrogen to get the same amount from each side of the reaction. So:
8 H₂S → 8 H₂ + S₈
Now the amount of elements on each side of the equation:
Left side: 16 H and 8
Right side: 16 H and 8 S
The balanced reaction is:
8 H₂S → 8 H₂ + S₈
Two layers of earth have convection currents
Answer: Mantle and core are the two layers of the earth that have convection currents.
Explanation:
The mantle and outer core are the two layers that are associated with the convection currents. In the mantle the convection currents occur due to the heat emerging out of the core also mantle region releases heat. If the transfer of heat or convection currents stop then the mantle will not flow and the core will not produce magnetic field at all. This will lead to coldness in earth and earth will lose the protection from harmful radiations.
How many atoms are in 4.3 moles of lithium?
How is heat transferred through space
Heat is transferred by energy waves moving through space. Explanation: According to research: Radiation is the transfer of heat energy through space by electromagnetic radiation. Most of the electromagnetic radiation that comes to the earth from the sun is invisible
Please give brainiest if possible, I kinda need it. Thnx!
Answer:
the transfer of energy through space is called radiation. through radiation there is no direct contact between heat source and object. sunlight radiation warms the earth's surface; radiation can also come from fires.
The total pressure of a mixture of hydrogen, oxygen, and methane is 96.4 kPa. The partial pressures of hydrogen and oxygen are 13.5
kPa and 29.3 kPa respectively. What is the partial pressure of methane?
A. 139.2 kPa
B. 53.6 kPa
C. 82.9 kPa
D. 42.8 kPa
Answer:
53.7kPa
Explanation:
Given parameters:
Total pressure of the mixture = 96.4kPa
partial pressure of hydrogen = 13.4kPa
partial pressure of oxygen = 29.3kPa
Unknown:
partial pressure of methane = ?
Solution:
The total pressure of mixture is equal to the sum of their particles pressures;
Partial pressure of methane = 96.4kPa - (13.4kPa + 29.3kPa)
Partial pressure of methane = 53.7kPa
Answer: 53.6
Explanation: I just took the test and got it right.
How many moles of solute are in 250 mL of 2.0 M CaCl2? How many grams of CaCl2 is
this?
Answer:The solution contains 0.50 mol or 55 g of CaCl2 . You know there are 2.0 mol of CaCl2 in 1 L of solution. (40.08 + 2 × 35.45) g=(40.08 + 70.90)
g=110.98 g
Explanation:
My I please have brainliest
110.98 grams of CaCl₂ is there present in 2.0 M CaC₂.
What is calcium chloride?Calcium chloride is made up of calcium and chloride.
Given, that the solution contain 250 mL of 2.0 M CaCl2
You know there are 2.0 mol of CaCl2 in 1 L of solution.
(40.08 + 2 × 35.45) g
= (40.08 + 70.90)
=110.98 g
Thus, 110.98 grams of CaCl₂ is there present in 2.0 M CaC₂.
Learn more about calcium chloride
https://brainly.com/question/15296925
#SPJ2
Question 5
Which of the following is not an example of mutualism?
18. What is the molarity of a bleach solution containing 9.5 g of NaOCL per liter of bleach
Answer:
0,1276 M
Explanation:
Molair mass of NaOCl = 74,44 g/mol
You have 9,5 g/L.
You need to calculate with the molair mass, how many moles 9,5 g are:
9,5 g / 74,44 g/mol = 0,1276 mol
0,1276 mol / 1 L = 0,1276 M
The molarity of a bleach solution containing 9.5 g of NaOCL per liter of bleach is mathematically given as
M= 0.1276 M
What is the molarity of a bleach solution containing 9.5 g of NaOCL per liter of bleach?Generally, the equation for the Molar mass is mathematically given as
M=m/(g/mol)
Therefore
M=9,5 g / 74,44 g/mol
M= 0,1276 mol
Hence
M= 0.1276 M
In conclusion, the molarity
M= 0.1276 M
Read more about Molarity
https://brainly.com/question/9149034
#SPJ2
Solve the equation.
3 - y = 13
y =
Answer:
First we isolate y by doing - 3
-y = 10
Explanation:
-10 since 3- (-10) is actually 3 + 10 which is 13
Which type of model is a way of imagining how something works?
Answer:
mental model is an explanation of someone's thought process about how something works in the real world. It is a representation of the surrounding world, the relationships between its various parts and a person's intuitive perception about his or her own acts and their consequences. Mental models can help shape behaviour and set an approach to solving problems (similar to a personal algorithm) and doing tasks.
:)
please help me with this question/
Answer:
4 of each protons and electrons
Explanation:
since the atomic number is 4 it would contain both the same number of protons and electrons
I need help with number 5 pleaseee
Answer: the answer is d
Explanation:
Decane + Dioxygen = Carbon Dioxide + Water
Reaction Type
Combustion
A student dissolves 8.00 g of NH4NO3(s) in 100. g of H2O(l) in a coffee-cup calorimeter. Based on the initial and final temperatures of the mixture in degrees Celsius shown in the diagram above the laboratory setup, what is the calculated ΔT of the water reported to the appropriate number of significant figures?
4. How much water would be needed to dilute at 750 ml solution of 2.8M HCl to a 1.0 M solution?
5. If 550 mL of a 3.50 M KCl solution is left out to evaporate until the volume is 275 mL, what would the
new Molarity be?
6. Extra Credit: A solution of H,SO, has a molarity of 0.14 mol/L in 750 mL. If 250 mL of water is added:
a. What is the new molarity of the solution?
Three questions in 1 less see how good Brainly really is
Please helllpppp meeee
Do liquids have kinetic energy? Yes or no.
Answer:
YESSIR
Explanation:
Write the balanced equation for : potassium chlorite decomposing to potassium chloride and oxygen . (use —> for the arrow)
Answer: 2 KCIO3(s) + heat —> KCI (s) + 3 O2(g)
Explanation:
Will these groups of elements form ionic or molecular compounds? sodium and Iodine 
Answer:
Ionic
Explanation:
Answer:
carbon and hydrogen are molecular
Explanation:
The movement of broken down pieces of rock from one place to another is called
A. Deposition
B. Erosion
C. Weathering
D. Sediment
Answer:
The answer I believe is B. Erosion
Explanation:
Just sounds better than all the other choices.
Answer:
erosion b
Explanation:
it breaks down the rocks i remembered this in 4th grade :)
What is the purpose of the periodic table?
Answer:
the periodic table is important because it is organized to provide a alot of information about elements and how they relate to one another in one easy-to-use reference. The table can be used to predict the properties of elements, even those that have not yet been discovered.
Explanation:
