Answer:
try the formula v=s/t
v= velocity
s= speed
t=time
Explanation:
Use what you have learned in the reading to answer the following question. The point of a compass needle points to Earth’s north pole. The point in the compass needle has–
~the same polarity as Earth's north pole.
~the opposite polarity from Earth’s north pole.
~no polarity.
~unlimited polarity.
The point in the compass needle has the opposite polarity from Earth’s north pole. The correct option is B.
What is a compass needle?The compass needle A magnetized pointer within a compass that can freely align with the Earth's magnetic field.
The magnetic needle is the most important part of the compass. It swings around the compass as you move, but the red end always points north and the white (or sometimes black) end always points south.
If you mean the geographical North Pole, the needle would point south because that is the only way to get there; more specifically, it would point south along the 112.4 degrees west longitude meridian towards the magnetic north pole at 82 degrees north, where compasses point.
Thus, the correct option is B.
For more details regarding a compass needle, visit:
https://brainly.com/question/2577109
#SPJ2
What is another name for the rare earth elements?
a.
Group 1
c.
Group 6
b.
Lanthanide
d.
Alkaline Earth
Explanation:
lanthanide is another name for the rare earth
elements.
Answer:
use common sense
Explanation:
A 3000 kg truck travelling at 50km/hr strikes a stationary 1000 kg car, locking the two vehicles
together. What is the final velocity of the two vehicles?
(Please show work)
Answer:
50 x 3000 = 150000/4000 = 37.5
37.5 I think.
Explanation:
Hope this helps!
A 3000 kg truck travelling at 50km/hr strikes a stationary 1000 kg car, locking the two vehicles together, the final velocity of the two vehicles after the collision is approximately 10.43 m/s.
We may use the concept of conservation of momentum to calculate the final velocity of the two vehicles after the collision.
The total initial momentum (P_initial) is given by:
P_initial = (mass of truck) * (initial velocity of truck) + (mass of car) * (initial velocity of car)
P_initial = (3000) * (50) + (1000) * (0)
The velocity:
Vt = 50 * (1000/3600) = 13.9 m/s
Vc = 0 = 0 m/s
P_initial = (3000) * (13.9) + (1000) * (0 )
P_initial = 41700 kg·m/s
P_initial = P_final
41700 kg·m/s = (3000 kg + 1000 kg) * Vf
41700 kg·m/s = 4000 kg * Vf
Now Vf:
Vf = 41700 kg·m/s / 4000 kg
Vf ≈ 10.43 m/s
Therefore, the final velocity of the two vehicles after the collision is approximately 10.43 m/s.
For more details regarding velocity, visit:
https://brainly.com/question/30559316
#SPJ2
What unit of time on Earth is based on the revolution of the Earth around the Sun?
A.
day
B.
hour
C.
year
D.
month
C.) Year
i hope this helped! please mark me as brainliest and 5 stars >:)
Answer:
I believe it's C. Year.
Explanation:
Hope this helps! ^^
hii please help i’ll give brainliest if you give a correct answer please
Answer:
they are equal and act in opposite directions
Explanation:
newton's third law of motion states that if object A exerts a force on object B, then object B will exert an equal but opposite in direction force.
hope it helps, I think my response was late,
NEED THIS DONE ASAP HELP
Answer: Exercise Physiology
Explanation:
How far will a force of 6 x 10^3N stretch a spring with spring constant 3 x 10^4 Nm-1 ?
Answer:
0.2m
Explanation:
F = 6 x 10^3N
k = 3 x 10^4 Nm-1
x = ?
from Hooke's law, F = kx
x = F/k = 6 x 10^3 ÷ 3 x 10^4 = 0.2m
An object initially traveling at 20.0 m/s south decelerates uniformly at 6.00 m/s2 and is displaced 25.0 m. What is the final velocity of the object? (magnitude and direction)
Answer:
50.37 m/s and 40ms object
Find focal length of a concave mirror having 40 cm radius of curvature
Answer:
The focal length of the given spherical mirror is 20cm.
Explanation:
plz follow me
Can y’all help me pleaseeee
A meterologist made these observations one day:
• In the morning, anocean wave hit a shoreline every 15 seconds.
• In the afternoon, an ocean wave hit the shorlinie every 30 seconds.
Identify whether the ocean waves transferred more or less energy in the morning than in the afternoon.
Write your answer in complete sentences.
Answer:
They transfered more energy in the morning.
Explanation:
This is because, let me put this in simple words, you have more energy, you can run more laps around the track, right? This is the same with the waves. They have more energy, so they can crash aganst the shore more!
a cycle lasts for 8 seconds. what is the frequency
This frequency definition leads us to the simplest frequency formula: f = 1 / T . f denotes frequency and T stands for the time it takes to complete one wave cycle measured in seconds. The SI frequency unit is Hertz (Hz), which equals 1/s (one cycle per second)
[tex] \\ [/tex]
Hope It Helps!
What kinds of bonds make up a formula unit of sodium chloride?
a.
Ionic bonds
b.
Covalent bonds
c.
1 ionic bond and 1 covalent bond
d.
Van der Waals forces
Answer:
a.ionic bond is kinds of bonds make up a formula unit of sodium chloride.
Answer:
A
Explanation:
pleaaaaaaaaaaaaaaase help me vvvvvvvvvvvvvvv
Which one, mass or weight, would change if you were to travel to another planet or moon?
Answer:
The answer is weight.
Mass is constant, your mass, height and width won’t change. So that leaves weight.
what is the formula for acceleration?
Answer:
Acceleration (a) is the change in velocity (Δv) over the change in time (Δt), represented by the equation a = Δv/Δt. This allows you to measure how fast velocity changes in meters per second squared (m/s^2). Acceleration is also a vector quantity, so it includes both magnitude and direction.
Explanation:
I don’t get this pls help
Answer:
What do you need help with?
Which of the following objects have gravitational potential energy?
A) a diver standing on a diving platform.
B) A hockey puck gliding across the ice.
C) an archers bow that is drawn back.
D) A runner waiting on the starting blocks.
Answer:
An archers bow that is drawn back
Answer:
A)a diver standing on a diving platform.
REQUESTS/REQUIERMENTS:
BRAINLIEST PLEASE
HELP!!! I need to turn this in quickly :((
F = 6.0 x 10⁻⁸ N
Further explanationGiven
mass of 2 dump trucks = 1500 kg
distance = 50 m
Required
Gravitational force
Solution
Newton's Gravity Law:
[tex]\rm F=G.\dfrac{m_1.m_2}{r^2}[/tex]
with F = gravitational force,
G = gravitational constant,
m1, m2 = mass of object,
r = distance between two objects.
Input the value :
F = (6.67.10⁻¹¹N.m² / kg² x 1500²) : 50²
F = 6.0 x 10⁻⁸ N
1. Two magnets are placed on a table, and they immediately move to attach to each other. Which statement is correct about the energies in the system?
Kinetic energy is at its peak when the magnets are first released, then it decreases steadily. Energy stored in the magnetic field becomes zero.
The kinetic energy of the system is derived from the thermal energy created by increased velocity. Energy stored in the magnetic field does not change.
Kinetic energy and velocity are at zero when the magnets are held apart, and both increase rapidly when they are released and move together. Energy stored in the magnetic field decreases.
The velocity and kinetic energy of the system increase as the energy stored in the magnetic field increases.
2. Two magnets are placed on a table, and they immediately move to attach to each other. Which statement is correct about the energies in the system?
The energy stored in the system is converted to kinetic and thermal energy.
The energy stored in the system is converted to kinetic energy.
The energy stored in the system is converted to kinetic, thermal, and sound energy.
The energy stored in the system is converted to thermal and sound energy.
3. A magnet is moved close to a rubber band. How does the energy stored in the magnetic field change?
The energy stored in the magnetic field increases.
The energy stored in the magnetic first increases and then decreases.
The energy stored in the magnetic field does not change.
The energy stored in the magnetic field decreases.
4. Two donut-shaped magnets are stacked on top of each other with a wooden dowel in the center. The south poles of the magnets are facing each other. Once the upper magnet is released, it accelerates downward and stops 1 cm above the lower magnet. How does the energy stored in the magnetic field change?
All of the energy stored is converted into kinetic, thermal, and gravitational energy.
Some of the energy stored is converted into kinetic, thermal, and gravitational energy.
All of the energy stored is converted into kinetic and thermal energy.
Some of the energy stored is converted into kinetic and thermal energy.
According to the law of conservation of energy, energy can neither be created nor destroyed but is transformed from one form to another.
1) The statement that is true about the magnets involved is that; "kinetic energy and velocity are at zero when the magnets are held apart, and both increase rapidly when they are released and move together. Energy stored in the magnetic field decreases."
2) In the second question, the statement that is correct about the energies of the system is that the energy stored in the system is converted to kinetic energy.
3) When a magnet is moved close to a rubber band, the energy stored in the magnetic field does not change.
4) In the fourth question, some of the energy stored is converted into kinetic, thermal, and gravitational energy.
Learn more about energy conversion:https://brainly.com/question/4260635
Answer:the correct answer is: the energy stored in the system is converted to kinetic, thermal and sound energy
Explanation:
Select the correct sequence of steps for lighting a Bunsen burner?
A. Apply the spark above the barrel of the Bunsen burner.
B. Open the gas adjustment at the base of the Bunsen burner.
C. Connect the burner hose to the gas outlet.
D. Open the gas valve on the gas outlet
D. C, A, B
C, A, D, B
C, D, A, B
C, D, B, A
Answer:
CDBA
Explanation:
Just did it on Study island
The correct sequence of steps for lighting a Bunsen burner would be C, D, B, A, therefore the correct answer is option D.
What is thermal energy?Thermal energy sometimes referred to as heat energy, may be described as the type of energy in which heat is transmitted from one body to another body as a result of their molecular motions.
The following would be the proper procedure for lighting a Bunsen burner:
Link the gas outlet and the burner hose.
The gas output valve should be opened.
Open the Bunsen burner's base-mounted gas adjustment valve.
The Bunsen burner's barrel should be covered with the spark.
Thus, the right response is option D since the proper stages to ignite a Bunsen burner are C, D, B, and A.
Learn more about thermal energy from here, refer to the link;
brainly.com/question/3022807
#SPJ2
How are reversibility, time, and entropy connected
Answer:
As one goes "forward" in time, the second law of thermodynamics says, the entropy of an isolated system can increase, but not decrease. ... Thus, entropy measurement is a way of distinguishing the past from the future.
Explanation:
how jolibee mascot move their eyes?
Answer: i think they control the eyes to move them.
Explanation:
Ranjana has average velocity 3.2 m/s
How long does she take to cover a displacement
of 256 m
Answer:
t= 80 seonds
Explanation:
Given that,
The average velocity of Ranjana, v = 3.2 m/s
We need to find how long does she take to cover a displacement of 256 m. Let she takes t time.
We know that,
Average speed = distance/time
So,
[tex]t=\dfrac{d}{v}\\\\t=\dfrac{256\ m}{3.2\ m/s}\\\\t=80\ s[/tex]
So, she will take 80 seconds to cover a displacement of 256 m.
out of solid and liquid in which the effect of gravity is more
Answer:
Liquid
Explanation:
Thw answer is liquid
What is the velocity of a wave with a frequency of 300 Hz and a wavelength of 0.45 m?
Answer:
velocity= 135m/s
Explanation:
velocity = 300×0.45
= 135m/s²
when you do work on an object you transfer,
what is the standard unit of velocity
Answer:
Explanation:
Meters per second
Answer:
m/s (meters per second)
Explanation:
The chemical symbol for nitrogen is
A Na
B Ni
Ne
DN
The chemical symbol for nitrogen is N
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
Chemical symbol for nitrogen is :
D.) " N "Review the poster.
https://www.cdc.gov/handwashing/pdf/wash-your-hands-fact-sheet-508.pdf
Which statement best describes the purpose of the “Stop Germs! Wash Your Hands” poster?
to inform people of when, how, and why to wash their hands
to entertain people with a how-to demonstration
to describe the sensory experience of washing hands
to persuade people to engage in more healthy hygiene practices
Answer: A, to inform people of when, how, and why to wash their hands.
Explanation: in the poster it shows when you should wash your hands, how you should wash your hands, and why its important to wash your hands! Please give brainliest!
The statement on the CDC poster is meant to to inform people of when, how, and why to wash their hands.
Why hand washing?Hand washing is a very important way of stopping the spread of infectious diseases. We saw this especially during the pandemic when there was a wider call for hand washing.
The statement “Stop Germs! Wash Your Hands” on the CDC poster is meant to to inform people of when, how, and why to wash their hands.
Learn more about hand washing: https://brainly.com/question/17756657
What is the unit for molar mass?
Answer:
kilogram per mole
Explanation:
ffdddddfsds
Answer: g/mol
Explanation:
