Answer:
The equilibrium shifts right to produce more SO3 molecules.
Explanation:
The equilibrium law states that when a system encounters a disturbance like a temperature, concentration, or pressure modifications, it will react to restore a new state of equilibrium.
Adding a reactant such as oxygen (O2) will shift the reaction in the direction of the product, on the basis of the equilibrium law. Therefore, the equilibrium will move toward the product side.
A phase change from a solid to a gas is called:
Answer:
sublimation
Explanation:
Name the property of salt investigated in the above experiment
which experiment please involve a clip
A sample of a gas is kept at constant pressure while
its temperature is cooled from 100°C to 0°C. What
was its original volume if its final volume is 1.83 L?
Explanation:
here's the answer to your question
What is the hydronium ion concentration of a solution with a pOH of 7.20?
A - 1.56 × 10^−6 M
B - 1.79 × 10^−6 M
C - 1.58 × 10^−7 M
D - 2.78 × 10^−7 M
I think the correct answer is C, can anyone confirm this?
Answer:
C - 1.58 × 10^−7 M
Explanation:
The hydroxide ion concentration can be found from the pOH by the reverse mathematical operation employed to find the pOH. [OH-] = 10-pOH or [OH-] = antilog ( - pOH) Page 2 Example: What is the hydroxide ion concentration in a solution that has a pOH of 5.70? On a calculator calculate 10-5.70, or "inverse" log (- 5.70).
The concentration of hydronium ion C) - 1.58 × 10^−7 M
The concentration of hydronium ionif pOH is 7.20 than pH = 14-7.20∴pH=6.80
The hydroxide ion concentration can be found from the pOH by the reverse
How do you calculate concentration from pH?To calculate the pH of an aqueous solution we need to know the concentration of the hydronium ion in moles per liter (molarity).
The pH is then calculated using the expression:
pH = - log [H3O+]
-log[6.80]
- 1.58 × 10^−7 M
learn more about hydronium ion here: https://brainly.com/question/1396185
#SPJ2
if 1.35 g of aluminum occupies 0.500 cm^3. what is the density of aluminum
Answer:
2.7
Explanation:
Density= mass/volume
= 1.35/0.500
= 2.7
the element of group 1 hour reactive but those of group 18 are inert, why?
Answer:
The noble gases (Group 18) are located in the far right of the periodic table and were previously referred to as the "inert gases" due to the fact that their filled valence shells (octets) make them extremely nonreactive.
How many chlorine (CI) atoms are in Methylene?
Answer:
None
Explanation:
Methylene is an organic compound and organic compounds consist of hydrogen atoms and Carbon atoms in n this case Methylene(CH2) has one carbon and two hydrogens .
Answer: methylene doesn't contain CL(chlorine) atoms
Explanation: the chemical formulae for Methylene is CH2
which means it contains only carbon and hydrogen atoms which is 1(one) carbon 2(two)hydrogen atoms
HOPE THIS HELPS!!
How the amount of acid rain caused by the burning of fossil fuels can be reduced ?
Answer:
The amount of acid rain caused by the burning of fossil fuels can be reduced by creating nitrogen oxides in the process of burning coal and other fossil fuels, some power plants are changing the way they burn coal. A great way to reduce acid rain is to produce energy without using fossil fuels. Instead, people can use renewable energy sources, such as solar and wind power.
Calculate the amount of mole(s) of CoF2 required to react with 12.8 moles of HCI.
CoCl2 + 2HF --> CoF2 + 2HCI
Explanation:
here's the answer to your question
If a 10.0 g piece of metal required 100 cal to raise its temperature
by 20°C, what would you report as its specific heat?
a. 10 cal/g·°C
b. 200 cal/g·°C
c. 0.5 cal/g·°C
d. 2 cal/g·°C
Answer:
C. 0.5 cal/g°C
Explanation:
Using the following equation:
Q = m × c × ∆T
Where;
Q = amount of heat absorbed/released (calories)
m = mass of substance (g)
c = specific heat capacity (calg/°C)
∆T = change of temperature (°C)
According to the information provided in this question;
m = 10g
c = ?
∆T = 20°C
Q = 100cal
Using Q = m × c × ∆T
c = Q ÷ (m × ∆T)
c = 100 ÷ (10 × 20)
c = 100 ÷ 200
c = 0.5 cal/g°C
How many Calcium (CA) Atoms are in Calcium Oxide
The compound KOH is ________. insoluble, because all compounds containing K are insoluble insoluble, because all compounds containing OH- are in soluble soluble, because all compounds containing K are soluble soluble, because all compounds containing OH- are soluble insoluble, because KOH is insoluble
Answer:
soluble because all compounds containing K are soluble
Explanation:
Most metal hydroxides are insoluble. However, alkali metal hydroxides (such as KOH and NaOH) are very soluble.
In the case of KOH, the K cation is attracted to the electronegative oxygen on water. The OH anion is capable of hydrogen bonding to the water. (Notice how OH⁻ is simply the deprotonated form of water.)
The compound KOH is soluble insoluble, because all compounds containing K are insoluble insoluble, because all compounds containing OH- are in soluble soluble, because all compounds containing K are soluble soluble, because all compounds containing OH- are soluble insoluble, because KOH is insoluble
What are alkalis?Alkalis are bases which are soluble in water. The basic alkalis are as follows:
KOHNaOHCa(OH)2Mg(OH)2 is insoluble in water.
In conclusion, KOH is a soluble base
Learn more about alkalis:
https://brainly.com/question/25317545
Fe + HNO₃ -> Fe(NO₃)2 + H₂
which is the following is a vector quality?
ans:
1)mass
2)speed
3)time
4)plane area
Answer:
speed
Explanation:
hope it helps
keep smiling
Between volume and mass which gives a larger source of error in the determination of density? Explain why.
Answer:
volume gives a larger source of error in determination of density
Answer:
Density and volume are inversely proportional. The greater the volume, the lower the density.
Density= Mass/ Volume
Explanation:
What is Density?Density= Mass/ Volume
A volume error may be due to the measuring instrument used. Different instruments have different resolutions, and therefore varying percentage uncertainties. An instrument with a higher resolution has a lower percentage error. A pipette will give a more accurate reading compared to a beaker. Density and volume are inversely proportional. The greater the volume, the lower the density.
Parallax error could also lead to inaccurate volume readings. The volume reading must be taken below the meniscus for a liquid such as water and above the meniscus for a liquid such as mercury.
Another source of error is the measurement of mass. Instruments that are used to determine mass have different percentage uncertainties. An electronic weighing scale is most likely to give an accurate reading. Density is directly proportional to mass. The greater the volume of the liquid, the greater its density.
Learn more about Density
https://brainly.com/question/1354972
#SPJ2
Do cycloalkanes easily take part in addition reactions?
Answer:
The reactions of the cycloalkanes are generally just the same as the alkanes, with the exception of the very small ones - particularly cyclopropane. ... In the absence of UV light, cyclopropane can undergo addition reactions in which the ring is broken
Temperature is measured in degrees C whereas heat is measured in
J
m
t
q
Answer:
J
Explanation:
Heat is measured in Joules (J)
list three factors that affect the rate of a chemical reaction
Answer: 1) temperature, 2) add a catalyst, and 3) concentrations
Explanation: A rise in temperature adds kinetic energy to the reactants, leading to more frequent, and energetic collisions, which will often accelerate the reaqction. A catalyst is an agent that helps the reaction move forward more quickly by offering a substrate that aids in orienting the reactants for more efficient reaction. A higher concentration increases the chances of collisons that result in products.
hii pls help me to balance the equation and state the symbols thanksss
Answer:
I hope that the link above will be helpful
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
[tex]\boxed{\pmb{\green{\sf{2Mg +H_{2}SO_{4}\dashrightarrow H _{2}+Mg_{2}SO_{4}}}}}[/tex]
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
Temperature and kinetic energy have, what type of relationship
Answer:Calor y temperatura son dos conceptos diferentes pero estrechamente relacionados. Observa que tienen diferentes unidades: la temperatura típicamente tiene unidades de grados Celsius (^\circ\text C
∘
Cdegrees, start text, C, end text) o Kelvin (\text KKstart text, K, end text), y el calor tiene unidades de energía, joules (\text JJstart text, J, end text). La temperatura es una medida de la energía cinética promedio de los átomos o moléculas en el sistema. Las moléculas de agua en una taza de café caliente tienen una mayor energía cinética promedio que las moléculas de agua en una taza de té helado, lo que también significa que están moviéndose a una velocidad más alta. La temperatura también es una propiedad intensiva. Esto significa que no depende de qué tanta cantidad tengas de una sustancia (¡siempre y cuando esté toda a la misma temperatura!). Por esta razón, los químicos pueden utilizar el punto de fusión para poder identificar una sustancia pura: la temperatura a la cual se derrite es una propiedad de la sustancia que no depende de la masa de una muestra.
A nivel atómico, las moléculas en cada objeto están constantemente en movimiento y chocando entre sí. Cada vez que chocan, pueden transferir energía cinética. Cuando dos sistemas están en contacto, se va a transferir calor del sistema más caliente al más frío por medio de choques moleculares. La energía térmica va a fluir en esa dirección hasta que los dos objetos están a la misma temperatura. Cuando esto ocurre, decimos que están en equilibrio térmico.
Explanation:
Al calor a veces se le llama una magnitud de proceso, porque está definido en el contexto de un proceso por el cual se puede transferir energía. No decimos que una taza de café contiene calor, pero podemos hablar del calor transferido de la taza de café caliente a tu mano. El calor también es una propiedad extensiva, así que el cambio de temperatura que resulta al transferir calor a un sistema depende de cuántas moléculas hay en el sistema.
which best describes nuclear energy?
A the energy that matter has due to the vibrations of its particles
B the energy an object has due to its chemical bonds
C the energy generated by a flow of electrons
D the energy stored inside the center of an atom
Answer:
The correct answer is - D. the energy stored inside the center of an atom.
Explanation:
Each atom has a small center in it called the nucleus and the energy that holds the nucleus or center of the atom together in the atom is known as nuclear energy.
It is the energy that is stored in the center of the atom and normally does not come out, however, in some radioactive atoms the sends some part of the energy as radiation.
Thus, the correct answer is - D. the energy stored inside the center of an atom.
Please tell me the answer of what is unit?
Answer:
a quantity chosen as a standard in terms of which other quantities may be expressed.
Explanation:
Explanation:
Unit is a standard physical quantity defined and adopted by convention,with other quantity of same kind.
: Axit sunfurơ (H2SO3) là axit yếu, ngay trong dung dịch H2SO3 cũng bị phân hủy thành chất X và H2O. X là:
A. H2S B. SO2 C. H2SO4 D. SO3
Answer:
DD
Explanation:
WM "Please write the molecular formula for the following by criss cross method. 1. Calcium nitrate 2. Sodium bicarbonate 3. Magnesium nitrite 4. Sodium chloride 5. Hydrogen sulphate 6. Hydrogen chloride T-Aluminium bisulphate 8 Aluminium chloride 9. Aluminium sulphate 10. Hydrogen Nitrate
Answer:
1 Ca(NO3)2
Calcium- Ca, Valency 2
Nitrate- NO3, Valency 1
AFTER CRISS CROSS:
Ca1(NO3)2
Ca(NO3)2
2 sodium bicarbonate = NaHCO3
Na = Sodium = (Na)+
HCO3 = bicarbonate = (HCO3) -
Na HCO3
3 magnesium nitrite
+2 _ 1
Mg2(NO3)2
4 Na Cl
+1 _1
formula NaCl
5 hydrogen sulphide
H SO4
+1 _2
formula H2SO4
6 H Cl
+1 _1
HCl
7 AL2 HSO4
+2 -2
AL2(HSO4)3
8 NH4 Cl
+1 _1
NH4Cl
9 NH4 SO4
+1 _2
(NH3)2SO4
10 H NO3
+1 _1
HNO3
which is the answer?
Answer:
I could be wrong letter c
Usually scientists do not specialize and study one aspect of the
natural world, but will focus on many aspects to understand
why and how things happen.
TRUE
FALSE
Magnesium and Hydrochloric acid (HCl) react to form magnesium chloride (MgCl2) and hydrogen gas. If you started with 65.8 g of magnesium and 45.7 g of hydrochloric acid. What is the limiting reactant? Ensure you post calculations to prove your answer. (3 marks)
Answer:
Cl
Explanation:
n for Mg=m:Mm
=65.8:24
=2.74mol
n for Cl=m:Mm
=45.7:70
=0.65mol
According to the number of moles we can say that the limiting reagent is Cl as it has few moles.
Limiting agents are the reactant that determines the amount of the product in a reaction. In the reaction between magnesium and hydrochloric acid, the limiting reagent is HCl.
What is a limiting reagent?A limiting reagent is a substance that restricts or determines the amount of product formation in a reaction. They are the reactants with less number of moles and get consumed in the reaction before the other reactant.
The reaction between magnesium and hydrochloric acid is given by,
Mg(s) + 2HCl(aq) → MgCl₂(aq) + H2(g)
Here, 1 mole of Mg and 2 moles of HCl are required to produce 1 mole of magnesium chloride.
The moles of Mg,
= 65.8 g ÷ 24.305
= 2.707 mol
And, moles of HCl
= 45.7 g ÷ 36.458
= 1.253 mol
The stoichiometric ratio Mg : HCl = 1:2
Hence, Mg = 2.707 ÷ 1 = 2.707 and HCl = 1.253 ÷ 2 = 0.6265
Therefore, HCl is the limiting reagent.
Learn more about limiting reagents here:
https://brainly.com/question/19654705
#SPJ5
At 35.0°C and 3.00 atm pressure, a gas has a volume of 1.40 L. What pressure does the gas have at 0.00°C and a volume of 0.950 L?
Answer:
im just a child
Explanation:
ASAP
The concentration of reactants and products and the rate of reaction were measured during a chemical reaction. After the first 3 seconds, the rate of reaction was 1.8 x10−6 M/s. Which of the following would explain a lower rate after another 3 seconds?
A - The concentration of reactants increased while the concentration of product decreased.
B - The concentration of reactants decreased while the concentration of product increased.
C - All concentrations of reactants and products decreased.
D - All concentrations of reactants and products increased.
Answer:
B
Explanation:
During the first half of the reaction there was an increase in the rate of reaction due to the high concentration of the reactants. But as the reaction continues we witness a decrease in the amount of reactants which lowers the rate.
Answer:
B. The concentration of reactants decreased while the concentration of product increased.
Explanation:
took the test :)
Salt is often used to melt ice on roads during the winter because it lowers the freezing/melting point of water. When salt dissolves in water, individual Na and Cl- ions break away from the salt lattice and become surrounded by water molecules. Why would this cause ice to melt
Answer:
See explanation
Explanation:
The addition of an impurity lowers the melting point of a solid. If we add salt to ice, the melting point of the ice is lowered.
As this salty water is in contact with the ice, more of the salt dissolves to yield Na^+ and Cl^- and leads to the melting of more ice.
Freezing point is a colligative property hence it is affected by the presence of impurities. Hence, the addition of NaCl causes ice to melt faster.
