WILL GIVE BRAINLIEST
Which model provides more information-a chemical formula or a sketch of the molecule
like in the structural formula? Explain your reasoning.
Answer:
Explanation
:Both b/c a chemical formula tells you how many and a sketch formula shows how they are bonded together.
Molecular formulas show how many atoms of each element one molecule of a compound contains. Note: Ionic compounds are generally crystalline solids with high melting points. Other compounds, however, have very different properties.
Which chemicals previously used in products such as refrigerants, aerosol sprays, and cleaning products contributed to the depletion of the ozone layer
Answer:chlorofluorocarbons (CFCs) could deplete Earth's atmospheric ozone layer, which blocks the sun's damaging ultraviolet rays. When the scientists reported their findings in 1974, CFCs were widely used as refrigerant gases and as propellants in aerosol sprays
Explanation:
The most recent model of an atom is the_____.
Points: 67
Answer:
answer is electron cloud model
What happens to the atoms in food once animals eat them?
they are destroyed
they are used to make the animal grow
they are released as waste
Answer:
i think
they are used to male the animal grow
Once the animal eats the food, the atoms in food are used to make the animal grow.
What is an atom?An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/13654549
#SPJ2
How does lemon juice stop an apple from turning brown?
What is formed if two or more atoms join together?
A. Compound
B. Electronegativity
C. Nucleus
D. Element
HELP
Answer:
compound
Explanation:
compound = A substance consisting of atoms or ions of two or more different elements in definite proportions joined by chemical bonds into a molecule.
which of the following atom could reside in the same group? Explain your answer
Why does Alex’s equation better represent the reaction?
Answer : it has been tested
Explanation:
i took the test
A sample of tin (Cp = 0. 227 J/g•°C) is placed in a freezer. Its temperature decreases from 15. 0°C to â’10. 0°C as it releases 543 J of energy. What is the mass of the sample? Round your answer to three significant figures. G.
Taking into account the definition of calorimetry, the mass of the sample is 478.41 grams.
Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
Sensible heat is defined as the amount of heat that a body absorbs or releases without any changes in its physical state (phase change).
So, the equation that allows to calculate heat exchanges is:
Q = c× m× ΔT
where Q is the heat exchanged by a body of mass m, made up of a specific heat substance c and where ΔT is the temperature variation.
In this case, you know:
Q= -543 J because the energy is releasesc= 0.227 [tex]\frac{J}{gC}[/tex]m= ?ΔT= Tfinal - Tinitial= 10 C - 15 C= -5 CReplacing:
-543 J= 0.227 [tex]\frac{J}{gC}[/tex]× m× (-5 C)
Solving:
[tex]m=\frac{-543 J}{0.227 \frac{J}{gC}x(-5 C)}[/tex]
m=478.41 grams
In summary, the mass of the sample is 478.41 grams.
Learn more about calorimetry:
brainly.com/question/11586486?referrer=searchResults brainly.com/question/24724338?referrer=searchResultsPart 1: Name the type of chemical reaction that occurs when magnesium chloride
solution (MgCl2) reacts with sodium carbonate solution (Na2CO3).
Part 2: Explain why aluminum (AI) would react with copper chloride (CuCl2) but not with
magnesium chloride (MgCl2).
Mg is ahead of Al in the electrochemical series and more reactive than Al hence Al does not react with MgCl2.
A chemical reaction is said to have occurred when new substances are formed. The reaction between magnesium chloride solution and sodium carbonate solution is a double decomposition reaction since the cations exchange anion partners in the product;
MgCl2(aq) + Na2CO3(aq) ------> MgCO3(s) + 2NaCl(aq)
We must note that a single replacement reaction depends on the relative positions of metals in the electrochemical series. Al can react with CuCl2 because Al is more reactive than copper and ahead of Cu in the electrochemical series. On the other hand, Mg is ahead of Al in the electrochemical series and more reactive than Al hence Al does not react with MgCl2.
Lear more about electrochemical series: https://brainly.com/question/25749323
Si echamos en un vaso agua y sal el ¿huevo flotaria ? por que
Help
what is isotopes
How many moles of AgNO3 must react to form 0. 854 mol Ag? mol AgNO3.
The moles of silver nitrate required to form 0.854 mol silver ion has been 0.854 mol.
The balanced chemical equation for the dissolution of silver nitrate has been:
[tex]\rm AgNO_3\;\rightarrow\;Ag^+\;+\;NO_3^-[/tex]
The aqueous solution of silver nitrate has been dissociated into the constituent silver and nitrate ions.
In a balanced chemical equation, the coefficient has been equivalent to the moles of each reactant forming the moles of product.
From, the balanced equation,
[tex]\rm 1\;mol\;AgNO_3=1\;mol\;Ag[/tex]
The given moles of Silver has been 0.854 mol. Thus, the moles of silver nitrate required has been given as:
[tex]\rm 1\;mol\;Ag^+=1\;mol\;AgNO_3\\0.854\;mol\;Ag^+=0.854\;\times\;1\;mol\;AgNO_3\\0.854\;mol\;Ag^+=0.854\;mol\;AgNO_3[/tex]
The moles of silver nitrate required to form 0.854 mol silver ion has been 0.854 mol.
For more information about the moles produced, refer to the link:
https://brainly.com/question/10606802
which of the following molecular compounds does NOT need the usage of prefix for the first element
SO2
S2O3
N2S
N2S3
Answer:
SO2
Explanation:
that's my answer
Sana mKatolong
If a number has the units g/L then its
A) a number we are not going to use at all.
B) an imaginary unit that we are not going to use.
C) creating a relationship between mass and volume
D) a relationship between volume and distance.
Answer:
C) creating a relationship between mass and volume
g/L
g or gram is mass
L or Litres is for volume
the empirical formula for trichloroisocyanuric acid
Answer:
OCNCl
Explanation:
The empirical formula for trichloroisocyanuric acid, the active ingredient in many household bleaches, is OCNCl. The molar mass of this compound is 232.41g/mol.
Mass is the amount of matter in an object, but
weight is
A. the size of the matter.
B. the amount of space matter takes up.
C. the shape of the matter.
D. gravity's pull on the matter.
Answer: is equal to the gravitational pull on an object
Explanation:
do Plants and animals create energy the same way?
Answer:
Yes
Step By Step Explanation:
Plants extract energy from food molecules the same way animals do — by cellular respiration.
Most, if not all plants are producers, and they make their own food using sunlight and raw materials, through a process called "photosynthesis". ... Plants get their energy in form of starch whereas animals get it in form of glycogen. Animals get their energy from the food they eat. Animals depend on other living things for food. Some animals eat plants while others eat other animals. This passing of energy from the sun to plants to animals to other animals is called a food chain.
Animals obtain energy from the food they consume, using that energy to maintain body temperature and perform other metabolic functions. Glucose, found in the food animals eat, is broken down during the process of cellular respiration into an energy source called ATP.
Hopes This Helps
how much heat is released when 32g of water cools from 46°C and freezes
The amount of heat released when 32g of water cools from 46°C and freezes is 6182.4 J
Heat: This is a form of energy that brings about the sensation of warmth. The S.I unit of heat is Joules (J)
⇒ Formula:
Q = cm(t₂-t₁).................. Equation 1⇒ Where:
Q = amount of heat releasedc = specific heat capacity of waterm = mass of watert₁ = Initial temperaturet₂ = Final temperatureFrom the question,
⇒ Given:
m = 32 g = 0.032 kgt₁ = 46 °Ct₂ = 0 °C (Freezing point)c = constant = 4200 J/kg.°C⇒ Substitute these values into equation 1
Q = 0.032(4200)(0-46)Q = -6182.4 JNote: The negative sign tells that heat is released and as such can be ignored.
Hence, The amount of heat released is 6182.4 J
Learn more about heat here: https://brainly.com/question/9614649
What is the chemical composition of dry ice?
Answer:
Dry ice is the solid form of carbon dioxide (CO 2), a molecule consisting of a single carbon atom bonded to two oxygen atoms. Dry ice is colorless, odorless, and non-flammable, and can lower the pH of a solution when dissolved in water, forming carbonic acid (H 2 CO 3).
Explanation: i asked my teacher and this was her response.
3) The nucleus in a photograph of a cell measures 3 mm across. If the magnification in the photograph is x 500, what is the actual size of the nucleus?
Answer:
1500mm oqkwndbdjdhdndjdd
what type of weather does a warm front cause and why
Please help to complete this
The last layer in layered design is _____________. Object Process None of the options Atoms Sub process
The last layer in the layered design is system layer so none of the above is the correct option.
Robotic Process Automation is a software technology that make use of some programs of computer to copy or mimic the behaviors of human when it has access with them. They been use effectively and ensure the work is perfectly done.
There are layers in the Robotic process automation but the last layer is System layer.
They can handle high volume of tasks.
The lowermost layer is associated with individual screen interactions. The lowermost layer in the layered design of Robotic process automation is the component layer or system layer . The Robotic Process Automation and this form technology is in robots creation.
Therefore, The last layer in layered design Is System layer so none of the above is the correct option.
Learn more about Robotic process automation from the link below.
https://brainly.com/question/41671370
what is the difference between nitrite and nitrate
Answer:
Nitrite:
Formula : NO₂⁻1 nitrogen molecule and two oxygen molecules with an excess electron.Angular shapeNitrate:
Formula: NO₃⁻1 nitrogen molecule and three oxygen molecules with an excess electron.Trigonal planar structure.[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807why does fluorine have the highest electronegativity
Answer:
- Fluorine has 5 Electrons in its 2P shell
- Fluorine is so close to ideal Electron Configuration, the Electrons are held very tightly to the Nucleus.
Explanation:
Hopefully this was helpful!
Fluorine-18 undergoes positron emission as shown:
18 F + 4x +48
Enter the appropriate values for A and Z and the chemical
symbol for X
A:
Z:
83
1
X:
Answer:Answer:
40-18 fl =>40-cl+cl+0-1e sorry if im rong
Explanation:
When [tex]^1^8F[/tex] undergoes positron emission, the product nucleus is, [tex]^1^8O[/tex].
What is a positron emission?In positron emission, also called positive beta decay (β+ decay), a proton in the parent nucleus decays into a neutron that remains in the daughter nucleus, and the nucleus emits a neutrino and a positron, which is a positive particle like an ordinary electron in mass but of opposite charge.
When a proton is converted into a neutron then the positron emission takes place as follows.
[tex]^1_1p\;\rightarrow\;^1_0n\;+\;^0_+1e[/tex]
A positron is represented by the symbol. Therefore, when a positron emission occurs then the resultant nuclei atomic number decreases by a unit mass.
The general equation representing positron emission is as follows.
[tex]^M_ZA\;\rightarrow\;^M_Z_-_1 B\;+\;^0_+1e[/tex]
Hence, fluorine-18 decays by positron emission as follows.
[tex]^1^8_9F\;\rightarrow\;^1^8_8n\;+\;^0_+1e[/tex]
Therefore, when [tex]^1^8F[/tex] undergoes positron emission, the product nucleus is, [tex]^1^8O[/tex].
Learn more about positron emission here:
https://brainly.com/question/14472781
#SPJ2
which statement describes how vapor pressure occurs? (1 point)
a) Some molecules of a substance have high enough kinetic energy to vaporize. These molecules exert
pressure on the substance.
b) Some molecules of a substance have low enough kinetic energy to melt. These molecules exert pressure on the substance
c) Some molecules of a substance have low enough kinetic energy to vaporize. These molecules exert
pressure on the substance.
d) Some molecules of a substance have high enough kinetic energy to melt. These molecules exert pressure on the substance
Some molecules in a substance have a high kinetic energy hence they are able to convert into vapor. These molecules exert pressure on the liquid surface.
We know that the molecules that compose matter are in constant random motion. The kinetic energy of all the molecules in the liquid are not the same. The molecules at the surface of the liquid posses more kinetic energy than the molecules below.
Some molecules of a substance have high enough kinetic energy to vaporize. These molecules exert pressure on the substance.
Learn more: https://brainly.com/question/25273232
Answer:
Some molecules of a substance have high enough kinetic energy to vaporize. These molecules exert pressure on the substance.
Explanation:
True or False. When light passes from one medium to another the speed changes.
Answer:
Its actually true
Explanation:
Your Welcome Canada,
OH YEAH!!!!!!
Answer:
The correct answer is "True".
Explanation:
I hope this helps!
Which materials are used to make concrete select all that apply
Answer:
cement air water sand and gravel
Explanation:
Answer:
Explanation:
The principal ingredients that make up the concrete mix are: cement, fine aggregate, coarse aggregate, water, chemical admixtures, and mineral admixtures.
