Passive prostheses are self-regulating, as shown in the first answer option.
We can arrive at this answer because:
Passive prostheses are devices used to replace parts of the body that were lost by an incident.These prostheses are very useful to establish balance or the aesthetics of the body, but they have no articulations and no movement mechanism, being static.This limitation allows passive prostheses not to need external regulation and to be self-regulated by fitting the body parts.
You can find more information about articulations and their effects on the link:
https://brainly.com/question/5847359?referrer=searchResults
Answer:
self-powered.
Kamal was told by his mother to pour water through a thin cloth into another container to further purify the water.
a) What do you think will happen to the mud and sand when pouring the water? b)Do you think the water filtered by Kamal is safe to drink?
a].When sand is added to water it either hangs in the water or forms a layer at the bottom of the container. Sand therefore does not dissolve in water and is insoluble. It is easy to separate sand and water by filtering the mixture.
b]. The water filtered by kamal is not safe to drink .
If you run out of water, or cannot carry enough water with you for your entire trip, you may need to source drinking water from natural water sources.
A mixture of methane and carbon dioxide gases contains methane at a partial pressure of 431 mm Hg and carbon dioxide at a
partial pressure of 504 mm Hg. What is the mole fraction of each gas in the mixture?
XCHA
Xc02
Answer:
XCH₄ = 0.461
XCO₂ = 0.539
Explanation:
Step 1: Given data
Partial pressure of methane (pCH₄): 431 mmHgPartial pressure of carbon dioxide (pCO₂): 504 mmHgStep 2: Calculate the total pressure in the container
We will sum both partial pressures.
P = pCH₄ + pCO₂
P = 431 mmHg + 504 mmHg = 935 mmHg
Step 3: Calculate the mole fraction of each gas
We will use the following expression.
Xi = pi / P
XCH₄ = pCH₄/P = 431 mmHg/935 mmHg = 0.461
XCO₂ = pCO₂/P = 504 mmHg/935 mmHg = 0.539
Select the structure of a compound C6H14 with a base peak at m/z 43.
A) CH3CH2CH2CH2CH2CH3
B) (CH3CH2)2CHCH3
C) (CH3)3CCH2CH3
D) (CH3)2CHCH(CH3)2
E) None of these choices.
The structure of a compound C₆H₁₄ with a base peak at m/z 43 is none of these .
What is a compound?Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.
Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:
1)Molecular compounds where in atoms are joined by covalent bonds.
2) ionic compounds where atoms are joined by ionic bond.
3)Inter-metallic compounds where atoms are held by metallic bonds
4) co-ordination complexes where atoms are held by co-ordinate bonds.
They have a unique chemical structure held together by chemical bonds Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.
Learn more about compounds,here:
https://brainly.com/question/13516179
#SPJ6
Urea, CH4N2O (s), is manufactured from NH3 (g) and CO2 (g). H2O (l) is another product of this reaction. An experiment is started with 2.6 grams of NH3 (g) added into a reaction vessel with CO2 (g).
Write the balanced equation for this reaction, being sure to include physical states. Based on the balanced equation above, calculate the following:
a. the theoretical yield of urea in grams that can be made from the NH3
b. the actual amount of urea made if the percent yield for this reaction is 34%.
Answer:
a. 4.41 g of Urea
b. 1.5 g of Urea
Explanation:
To start the problem, we define the reaction:
2NH₃ (g) + CO₂ (g) → CH₄N₂O (s) + H₂O(l)
We only have mass of ammonia, so we assume the carbon dioxide is in excess and ammonia is the limiting reactant:
2.6 g . 1mol / 17g = 0.153 moles of ammonia
Ratio is 2:1. 2 moles of ammonia can produce 1 mol of urea
0.153 moles ammonia may produce, the half of moles
0153 /2 = 0.076 moles of urea
To state the theoretical yield we convert moles to mass:
0.076 mol . 58 g/mol = 4.41 g
That's the 100 % yield reaction
If the percent yield, was 34%:
4.41 g . 0.34 = 1.50 g of urea were produced.
Formula is (Yield produced / Theoretical yield) . 100 → Percent yield
A compound with a molecular weight of about 64.47 g/mol was found to be 18.63 % of C, 1.56 % of H, 24.82 % of O, and 54.99 % of Cl by mass. Determine the molecular formula and draw the Lewis structure showing an accurate 3-D perspective. *Show your calculations
Answer:
See detailed explanation.
Explanation:
Hey there!
In this case, according to the given information, it turns out possible for us to solve this problem by firstly calculating the moles of each element, assuming those percentages are masses, so that we divide by their molar masses:
[tex]C=\frac{18.63}{12.01}=1.55\\\\H=\frac{1.56}{1.01} =1.55\\\\O=\frac{24.82}{16.00}=1.55\\\\Cl=\frac{54.99}{35.45}=1.55[/tex]
Then, we divide all of them by 1.55 to realize the empirical formula is:
[tex]CHOCl[/tex]
Whose molar mass is 64.47 g/mol, and therefore, since the molar mass of these two is the same, we infer the molecular formula is also CHOCl.
The Lewis structure is shown on the attached document, whereas, the central atom is C and it does complete its octet as well as both O and Cl.
Regards!
Which of the following behaviors would best describe someone who is listening and paying attention? a) Leaning toward the speaker O b) Interrupting the speaker to share their opinion c) Avoiding eye contact d) Asking questions to make sure they understand what's being said
Answer:
a Leaning towards the speaker
For a different reaction, the plot of the reciprocal of concentration versus time in seconds was linear with a slope of 0.056 M-1 s -1 . If the initial concentration was 2.2 M, calculate the concentration after 100 seconds. Show your work.
Answer:
[tex]C_t=0.165M[/tex]
Explanation:
From the question we are told that:
Slope [tex]K=0.056 M-1 s -1[/tex]
initial Concentration [tex]C_1=2.2M[/tex]
Time [tex]t=100[/tex]
Generally the equation for Raw law is mathematically given by
[tex]\frac{1}{C}_t=kt+\frac{1}{C}_0[/tex]
[tex]\frac{1}{C}_t=0.056*100+\frac{1}{2.2}_0[/tex]
[tex]C_t=0.165M[/tex]
The second-order reaction is the reaction that depends on the reactants of the first or the second-order reaction. The concentration after 100 seconds will be 0.165 M.
What is the specific rate constant?The specific rate constant (k) of the second-order reaction is given in L/mol/s or per M per s. It is the proportionality constant that gives the relation between the concentration and the rate of the reaction.
Given,
Slope (k)= 0.056 per M per s
Initial concentration of the reactant [tex](\rm C_{1})[/tex] = 2.2 M
Time (t) = 100 seconds
The concentration of the reaction after 100 seconds can be given by,
[tex]\rm \dfrac{1}{C_{t}} = kt + \dfrac{1}{C_{1}}[/tex]
Substitute values in the above equation:
[tex]\begin{aligned} \rm \dfrac{1}{C_{t}} &= 0.056 \times 100 + \dfrac{1}{2.02}\\\\&= 0.165 \;\rm M\end{aligned}[/tex]
Therefore, after 100 seconds the concentration is 0.165 M.
Learn more about the order of reaction here:
https://brainly.com/question/14810717
385 x 42.13 x 0.079 is (consider significant figures):
385 x 42.13 x 0.079 = 1281.38395
Consider the following titration for these three questions:
1.00 L of 2.00 M HCl is titrated with 2.00 M NaOH.
a. How many moles of acid are equal to one equivalent in this titration?
b. How many moles of HCl are found in solution at the halfway point of the titration?
c. How many liters of base will be needed to reach the equivalence point of the titration?
Answer:
a. 1 mole of acid is equal to one equivalent.
b. 1.00 moles of HCl are found.
c. 1L of 2.00M NaOH is needed to reach the equivalence point
Explanation:
HCl reacts with NaOH as follows:
HCl + NaOH → NaCl + H2O
Where 1 mole of HCl reacts with 1 mole of NaOH. The reaction is 1:1
a. As the reaction is 1:1, 1 mole of acid is equal to one equivalent
b. The initial moles of HCl are:
1.00L * (2.00moles HCl / 1L) = 2.00 moles of HCl
At the halfway point, the moles of HCl are the half, that is:
1.00 moles of HCl are found
c. At equivalence point, we need to add the moles of NaOH needed for a complete reaction of the moles of HCl. As the moles of HCl are 2.00 and the reaction is 1:1, we need to add 2.00 moles of NaOH, that is:
2.00moles NaOH * (1L / 2.00mol) =
1L of 2.00M NaOH is needed to reach the equivalence point
8) Determine whether mixing each pair of the following results in a buffera. 100.0 mL of 0.10 M NH3 with 100.0 mL of 0.15 MNH4Cl b. 50.0 mL of 0.10 M HCL with 35.0 mL of 0.150 M NaOHc. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOHd. 175.0 mL of 0.10 M NH3 with 150.0 mL of 0.12 M NaOH
Answer:
a. 100.0 mL of 0.10 M NH₃ with 100.0 mL of 0.15 M NH₄Cl.
c. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOH.
Explanation:
A buffer system is formed in 1 of 2 ways:
A weak acid and its conjugate base.A weak base and its conjugate acid.Determine whether mixing each pair of the following results in a buffer.
a. 100.0 mL of 0.10 M NH₃ with 100.0 mL of 0.15 M NH₄Cl.
YES. NH₃ is a weak base and NH₄⁺ (from NH₄Cl ) is its conjugate base.
b. 50.0 mL of 0.10 M HCl with 35.0 mL of 0.150 M NaOH.
NO. HCl is a strong acid and NaOH is a strong base.
c. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOH.
YES. HF is a weak acid and it reacts with NaOH to form NaF, which contains F⁻ (its conjugate base).
d. 175.0 mL of 0.10 M NH₃ with 150.0 mL of 0.12 M NaOH.
NO. Both are bases.
If atom X had 3 valence electrons and atom Y had 7 valence electrons, the correct chemical formula for the ionic compound they would form is Choices: A) XY3 B) X3Y6 C) X2Y3 D) X3Y7
Answer:
A) XY3
In both of the atom, they want to have 8 valence electrons on the outer shell so they can become stable.
A chemist determines by measurements that moles of bromine liquid participate in a chemical reaction. Calculate the mass of bromine liquid that participates. Round your answer to significant digits.
Answer:
5.20 grams of Br₂
Explanation:
From our previous knowledge;
We understand that:
The number of moles of a given element = mass of the element divided by its molar mass.
Mathematically:
[tex]\mathbf{no \ of \ moles =\dfrac{ mass}{ molar \ mass}}[/tex]
From the given information, let's assume that the 0.065 moles of liquid -bromine partake in the reaction.
From the periodic table, the molar mass of Bromine is = 79.9 g/mol
As such, the mass of liquid that partakes is calculated as:
0.065 mol = mass/ 79.9 g/mol
mass = 0.065 mol × 79.9 g/mol
mass of liquid that partakes in the reaction = 5.20 grams of Br₂
g When 2.50 g of methane (CH4) burns in oxygen, 125 kJ of heat is produced. What is the enthalpy of combustion (in kJ) per mole of methane under these conditions
Answer:
-800 kJ/mol
Explanation:
To solve the problem, we have to express the enthalpy of combustion (ΔHc) in kJ per mole (kJ/mol).
First, we have to calculate the moles of methane (CH₄) there are in 2.50 g of substance. For this, we divide the mass into the molecular weight Mw) of CH₄:
Mw(CH₄) = 12 g/mol C + (1 g/mol H x 4) = 16 g/mol
moles CH₄ = mass CH₄/Mw(CH₄)= 2.50 g/(16 g/mol) = 0.15625 mol CH₄
Now, we divide the heat released into the moles of CH₄ to obtain the enthalpy per mole of CH₄:
ΔHc = heat/mol CH₄ = 125 kJ/(0.15625 mol) = 800 kJ/mol
Therefore, the enthalpy of combustion of methane is -800 kJ/mol (the minus sign indicated that the heat is released).
PLEASE HELP ASAP
A total of 132.33g C3H8 is burned in 384.00 g O2. Use the following questions to determine the amounts of products formed.
• How many grams of CO2 and H2O will be produced? (2 points)
b. If the furnace is not properly adjusted, the products of combustion can include other gases, such as CO and unburned hydrocarbons. If only 269.34 g of CO2 were formed in the above reaction, what would the percent yield be? (2 points)
Carbon dioxide gas is collected at 27.0 oC in an evacuated flask with a measured volume of 30.0L. When all the gas has been collected, the pressure in the flask is measured to be 0.480atm. Calculate the mass and number of moles of carbon dioxide gas that were collected.
Answer:
[tex]M_{CO_2}= 25.7g[/tex]
Explanation:
From the question we are told that:
Temperature [tex]T=27.0[/tex]
Volume [tex]V=30L[/tex]
Pressure [tex]P=0.480atm[/tex]
Generally the equation for Ideal gas is mathematically given by
PV=nRT
Therefore
[tex]n=\frac{0.480 x 30}{0.08205 x 300}[/tex]
[tex]n=0.59moles[/tex]
Generally Mass of CO2 is given as
[tex]M_{CO_2}= 0.59 * 44 g/mol[/tex]
[tex]M_{CO_2}= 25.7g[/tex]
Critique this statement: Electrons can exist in any position
outside of the nucleus.
Answer:
However, there has to be 2 electrons on the first shell, and 8 on the others.
Explanation:
Hope this helps :)
5 points ) Which of the following is a benefit of using email to communicate at work ? a) You can express yourself in a limited number of characters b) You don't have to worry about using proper grammar. c) You always get a response right away. d ) You can reach a large audience with one communication .
Answer:
C
Explanation:
A complex ion that forms in solution has a structure that:____.
a. can be determined simply by stoichiometry.
b. can be predicted on the basis of electrical charge.
c. can only be determined experimentally.
d. cannot be determined.
Answer:
can only be determined experimentally.
Explanation:
In the early days of inorganic chemistry, the structure of complex ions remained a mystery hence the name ''complex''.
These ions appear to have structures that defied accurate elucidation. However, by diligent laboratory investigation, Alfred Werner was able to accurately determine the structure of cobalt complexes. As a result of this, he is regarded as a pathfinder in coordination chemistry.
Hence, the structure of complex ions can only be determined experimentally.
Answer:
c. can only be determined experimentally
Explanation:
It is not possible to know for certain the structure of a complex ion on the basis of stoichiometry or by the electrical charges on the components. The structure of the resulting complex ion can only be known by experiment.
2FePO4+3 Na2so4--->Fe2(so4) + 2 Na3Po4 if i ise 25grams of iron iii phosphate 18.5 g iton what is my percent yeild?
Answer:
56%
Explanation:
If I use 25 grams of iron (III) phosphate and obtain 18.5 g of iron (III) sulfate, what is my percent yield?
Step 1: Write the balanced equation
2 FePO₄ + 3 Na₂SO₄ ⇒ Fe₂(SO₄)₃ + 2 Na₃PO₄
Step 2: Calculate the theoretical yield of Fe₂(SO₄)₃
The mass ratio of FePO₄ to Fe₂(SO₄)₃ is 301.64:399.88.
25 g FePO₄ × 399.88 g Fe₂(SO₄)₃/301.64 g FePO₄ = 33 g Fe₂(SO₄)₃
Step 3: Calculate the percent yield of Fe₂(SO₄)₃
We will use the following expression.
%yield = (experimental yield/theoretical yield) × 100%
%yield = (18.5 g/33 g) × 100% = 56%
Given the following formula for calculating the ionization energy of one-electron species such as Li2+, He+, and H, calculate the ionization energy (in J/mol) for B4+. Use scientific notation in answers (ex: 1E10, 3.20E-6)
Answer:
The answer is "[tex]32819.9 \ \frac{J}{mol}\\\\[/tex]"
Explanation:
[tex]Boron: 5^{B}\to 1s^2 2s^2 2p^1[/tex]
[tex]\Delta E=-2.18\times 10^{-18}\ \frac{J}{atom}\ (\frac{1}{\infity^2}-\frac{1}{n^2_{initial}})(z^2) (6.022\times 10^{23}\ \frac{atom}{mol})\\\\[/tex]
[tex]=-2.18\times 10^{-18}\ \frac{J}{atom}\ (0-\frac{1}{1})(5^2) (6.022\times 10^{23}\ \frac{atom}{mol})\\\\ =2.18\times 10^{-18}\times 25 \times 6.022\times 10^{23}\ (\frac{J}{mol})\\\\ =328.199 \times 10^{5}\ (\frac{J}{mol})\\\\ =32819 \times 10^{3}\ (\frac{J}{mol})\\\\ =32819.9 \ (\frac{J}{mol})\\\\[/tex]
all question are compulsory
Answer:
is this question or you just asking I can't understand.
what is food nutrients
Answer:
Nutrients arw compounds in foods essential to life and heath
Answer: In simple terms nutrients are the energy that you get from food certain foods give more nutrients and others give close to none. That is what nutrients in your food is
Explanation:
If ionization energy of hydrogen atom is 13.6 eV then its ionization potential will be
Ionization potential and ionization energy are two terms used to describe the same thing.
The ionization potential of hydrogen atom is 13.6 eV
The ionization potential is the energy that is required to remove an electron from the neutral atom. It is the same as the ionization energy.
From the question, we can see that the ionization energy of the hydrogen atom is 13.6 eV, it also means that the ionization potential of the hydrogen atom is also 13.6 eV.
Therefore, If ionization energy of hydrogen atom is 13.6 eV then its ionization potential will be 13.6 eV
For more information see:
https://brainly.com/question/16243729
We know that water is purified before it is supplied to our houses. Then why do we have filters installed in our houses? What do they serve?
Answer:
Water filters remove elements that cause drinking water to have an unpleasant taste and smell, such as lead, chlorine and bacteria. Home water filtration system will improve the overall purity, taste and smell of your drinking water. It also lowers the pH level of the water that you drink.
If 50.0 g of sulfuric acid and 40.0 grams of barium chloride are mixed, how many grams of sulfuric acid and how many grams of barium chloride remain after the double replacement reaction is complete?
After the double replacement reaction is complete 0 grams of BaCl₂ and 31.16 grams of H₂SO₄ will remain.
First, we will write the balanced equation for the reaction
H₂SO₄ + BaCl₂ → BaSO₄ + 2HCl
This means 1 mole of BaCl₂ is needed to react completely with 1 mole of H₂SO₄ to give 1 mole of BaSO₄ and 2 moles of HCl
From the question, 50.0g of sulfuric acid is mixed with 40.0 grams of barium chloride. To determine the quantity of each substance remaining after the complete reaction, we will first determine the number of moles present in each of the reactant.
For H₂SO₄
mass = 50.0g
Molar mass = 98.079 g/mol
From the formula
Number of moles = Mass / Molar mass
∴ Number of moles of H₂SO₄ = 50.0g / 98.079 g/mol
Number of moles of H₂SO₄ = 0.5098 mol
For BaCl₂
mass = 40.0 g
Molar mass = 208.23 g/mol
∴ Number of moles of BaCl₂ = 40.0g / 208.23 g/mol
Number of moles of BaCl₂ = 0.1921 mol
Since the number of moles of H₂SO₄ is more than that of BaCl₂, then H₂SO₄ is the excess reagent and BaCl₂ is the limiting reagent (that is, it will be used up completely during the reaction)
From the equation, 1 mole of H₂SO₄ is needed to completely react with 1 mole of BaCl₂
∴ 0.1921 mol of H₂SO₄ will be needed to completely react with 0.1921 mol of BaCl₂.
Therefore, after the reaction is complete, 0 mole (i.e 0 grams) of BaCl₂ will remain and (0.5098 mole - 0.1921 mole) of H₂SO₄ will remain.
Number of moles H₂SO₄ that will remain = 0.5098 mole - 0.1921 mole = 0.3177 moles
Now, we will convert this to grams
From the formula
Mass = Number of moles × Molar mass
Mass of H₂SO₄ that will remain = 0.3177 moles × 98.079 g/mol
Mass of H₂SO₄ that will remain = 31.1597 g
Mass of H₂SO₄ that will remain ≅ 31.16 g
Hence, after the double replacement reaction is complete 0 grams of BaCl₂ and 31.16 grams of H₂SO₄ will remain.
Learn more here: https://brainly.com/question/6857557
Determine the value of the equilibrium constant for the following reaction, where the following amounts of each species are present at equilibrium in a 5.00 L container: 1.34 mol HCl, 4.30 mol O2, 30 g H2O, and 2.42 mol Cl2.
4 HCl(g) O2(g) ----> 2 H2O(l) 2 Cl2(g)
Explanation:
here's the answer to your question about
What functional group is found in an alcohol?
A. Ester
B. Amino
C. Carbonyl
D. Hydroxyl
Answer:
an alcohol is a Hydroxyl group due to the OH~ that is associated with it's molecules
The functional group found in an alcohol is Hydroxyl . Therefore, the correct option is option D.
What is functional group?A functional group in organic chemistry is a substituent and moiety inside a molecule that triggers the molecule's distinctive chemical processes. No matter how the rest of a molecule is made up, the very same functional group would experience the same or a similar set of chemical events.
This permits the design of synthetic chemistry as well as the methodical forecasting of chemical reactions as well as the behaviour of chemical molecules. Other functional groups close by can affect a functional group's reactivity. Retrosynthetic analysis can be used to design organic synthesis by using functional group interconversion. The functional group found in an alcohol is Hydroxyl .
Therefore, the correct option is option D.
To know more about functional group, here:
https://brainly.com/question/29263610
#SPJ7
You are titrating 24.3 mL of 2.00 M HCl with 1.87 M NaOH. How much NaOH do you expect to have added when you reach the equivalence point?
26.0 mL
15.4 mL
13.4 mL
Answer:
26mL
Explanation:
NaOH+HCl= NaCl+H2O
nHCl=0.0243*2=0.0486
nNaOh=nHCl
VNaOH=0.0486/1.87=0.026l=26ml
Answer:
26.0 mL
Explanation:
Calculating the expected pH of the buffer solution: Given that the pKa for Acetic Acid is 4.77, calculate the expected pH of the buffer solutions using the Henderson-Hasselbalch equation and the concentrations of Acetic Acid and Acetate added to the 250 ml Erlenmeyer flask: pH
Answer:
[tex]pH=4.77[/tex]
Explanation:
From the question we are told that:
pKa for Acetic Acid [tex]pK_a= 4.77[/tex]
Therefore
For Equal Concentration of acetic acid and acetatic ion
[tex]CH_3COOH=CH_3COO^-[/tex]
Generally the Henderson's equation for pH value is mathematically given by
[tex]pH=pK_a+log\frac{base}{acid}[/tex]
[tex]pH=4.77+log\frac{CH_3COO^-}{CH_3COOH}[/tex]
[tex]pH=4.77+log1[/tex]
[tex]pH=4.77[/tex]
Which of the following ions is the less likely to be formed?
A) Li+3
B) Na+
C) I-
D) Sr2+
Ε) Η+
Answer:
Li^3+
Explanation:
The electronic configuration of lithium is ; 1s2 2s1. This means that lithium has one electron in its outermost shell and two core electrons.
We know that it is difficult to remove these core electrons during ionization. Lithium belongs to group 1 hence Li^+ is formed more easily.
It is very difficult to form Li^3+ because it involves loss of core electrons which requires a lot of energy.
