The term used to describe the turning force exerted when pushing an object is effort.
What is effort?The is the input force or force applied at one point of a lever in order to overcome a load.
The relationship between effort, load and mechanical advantage of a lever is given as;
M.A = L/E
where;
M.A is mechanical advantageL is the loadE is the applied force or effortThus, the term used to describe the turning force exerted when pushing an object is effort.
Learn more about effort here: https://brainly.com/question/24237657
I need some help with this.
[tex]I = \frac{V}{R} \\ [/tex]
Thus :
[tex]I = \frac{160}{2} \\ [/tex]
[tex]I = 80 \: \: A[/tex]
So :
[tex]V = 160[/tex]
[tex]I = 80[/tex]
[tex]R = 2[/tex]
An 50 kg student runs and jumps onto a 25 kg tire swing, which is initially at rest, and rides the swing up into the air. The swing (and the student) then rises a vertical distance of 1.5 m. What was the initial speed, in m/s of the swing? Remember the acceleration due to gravity near Earth's surface, g = 9.81 m/s^2
A. 29 m/s
B. 5.4 m/s
C. 1.7 m/s
D. 15. m/s
E. 3.8 m/s
Will mark brainliest
Answer:
Option B, 5.4m/s
Explanation:
Using the formula v² = u ² - 2gh
v = 0(final velocity is zero at maximum height), u = ?, g = 9.81m/s², h = 1.5m
0² = u² - 2×9.81×1.5
0 = u² - 29.43
29.43 = u²
u = √29.43
= 5.42m/s
White light is an _____ mixture of all the colors.
Answer:
White light is a combination of all colors in the color spectrum.
Explanation:
It has all the colors of the rainbow. Combining primary colors of light like red, blue, and green creates secondary colors: yellow, cyan, and magenta
The force involved in falling of an apple from a tree is known as? (a) Magnetic force (b) electrostatic force (c) Contact force (d) gravitational force
Answer:
gravitational force
...........
How many neutrons are in an atom of Carbon-13 or (613C)?
Answer: 6 OR 7
Explanation:
Which element forms more com-
pounds than all the other elements
combined?
Answer:
Terms in this set (7) Which element forms more compounds than all the other elements combined? Carbon.
Explanation:
Hope its helps you ✌️
A kilowatt-hour is a unit of
1. force
2. power
3. work
4. voltage
5. current
6. None of these
7. torque
(I tried 2 and 6, but they were both wrong :( )
Answer:
option 4 is the correct answer
Which is an action that can cause an object to move or change its state of motion? energy force equilibrium inertia
Answer:
correct
Explanation:
In physics, a force is any interaction that, when unopposed, will change the motion of an object. A force can cause an object with mass to change its velocity (which includes to begin moving from a state of rest), i.e., to accelerate. Secondly, what force is necessary to change an object's motion?
Answer:
force
Explanation:
got it right on the test
Two Magnets are placed near each other on the space station orbiting earth. The south poles are facing each other which statement explains what what happen to the magnets.
A. They will be repelled because they are in each others magnetic field
B. They will be attracted because they’re magnetic fields will add together
C. They will not move because they are not in earths gravitational field.
D. They will not move because they do not have electric fields.
Explanation: A) They will be repelled because they are in each others magnetic field
what is the static friction force and kinetic friction for the image
According to the plot, static friction force has a maximum magnitude of around 3.0 N, and kinetic friction has a magnitude of about 1.5 N.
The plot appears to be telling you the force required to get the yellow block moving along the table. If one applies less than 3.0 N of force, the block remains motionless. But as soon as it starts to slide, one need only apply 1.5 N of force to keep it moving (presumably at a constant speed).
An object, moving with a constant velocity, travels 400 m in 25 s. What is its velocity?
v = d/t
= 400/25
= 16 m/s
I'm not sure though
1. The law of reflection states that the angle of _______ is equal to the angle ofreflection
•refraction
•incidence
Answer:
refraction
Explanation:
but this is easy so why
Calculate Kylie’s weight at 3 radii away from the center of the earth. Kylie weighs 565.4N on the earths surface
Answer:
Earth's mass is 5.98 x 1024 kg and has a radius of 6.37 x 106 m. 8.06 N/kg ... what would be the weight of a 70.0-kg student on the surface of Jupiter?Explanation:
A circle has a radius of 10 inches. Find the approximate length of the arc intersected by a central angle of mc001-1. Jpg 6. 67 inches 10. 47 inches 20. 94 inches 62. 8 inches.
The approximate length of the arc intersected by the central angle is 20.94 inches.
The given parameters:
Radius of the circle, r = 10 inchesCentral angle, [tex]\theta = \frac{2\pi }{3} \ rad[/tex]The approximate length of the arc intersected by the central angle is calculated as follows;
S = rθ
where;
S is the length of the arcSubstitute the given parameters and solve for the length of the arc
[tex]S = 10 \ in \times \frac{2\pi }{3} \\\\S = 20.94 \ inches[/tex]
Thus, the approximate length of the arc intersected by the central angle is 20.94 inches.
Your question is not complete, find the complete question below:
A circle has a radius of 10 inches. Find the approximate length of the arc intersected by a central angle of [tex]\frac{2\pi}{3}[/tex].
Learn more about length of arc here: https://brainly.com/question/2005046
magnetism and electricity are properties of metals due to their __________.
Answer:
hydrogen bonds
Explanation:
hope it helps
Select the correct answers from the list.(1 point) A black hole begins to form as an aging star abruptly collapses when it ceases__________ . This occurs after the star has consumed its component elements in this order___________.
A black hole forms as a star collapses when it ceases emitting radiation from fusion reactions. This occurs after the star has consumed hydrogen, helium, then through iron.
Star evolution refers to the process by which stars evolve (change) over time.
A black hole can be defined as a collapsed star where the gravitational field in its nucleus becomes greater than particles cannot escape from it.
In consequence, black holes are cosmic bodies in which gravity is so powerful that nothing (i.e., particles, radiation, light, etc.) can escape from them.
Nuclear fusion refers to the energy reactions produced by the fusion of hydrogen at the core of a star, thereby becoming helium.
Learn more about black holes here:
https://brainly.com/question/10597324
on what factors does the quantity of heat of an object depend
Answer:
The quantity of heat given to body depends on: (i) The mass of the body, (ii) The rise (or fall) in the temperature of the body, and (iii) Nature of the material of the body.
Explanation:
Hope this helps
have a great day
~Zero
Use what you know about mass and how you use it to calculate force in the following situation. If each washer has a mass of 4. 9 g, then the mass of two washers in kilograms would be. Given that F = ma, and if 4 washers are attached to the string and car instead of 2, then the applied force on the car will be. Recall a = 10 m/s2.
Considering the change of units and the definition of weight, the mass of two washers would be 0.0098 kg and if 4 washers are attached to the string, then the applied force on the car will be 0.196 N.
Mass of two washers
If each washer has a mass of 4.9 g, then the mass of two washers will be calculated simply by multiplying the mass of 1 washer by the amount you have of them, in this case 2:
4.9 g×2= 9.8 g
Being 1 kg = 1000 g, you apply the following rule of three to make the change of units: if 1000 g equals 1 kg, 9.8 g equals how many kilograms?
[tex]mass=\frac{9.8 gramsx1 kg}{1000g}[/tex]
Solving:
mass= 0.0098 kg
Finally, the mass of two washers would be 0.0098 kg.
Applied forceOn the other side, mass is the amount of matter that a body contains and weight is the action exerted by the force of gravity on the body.
The mass of an object will always be the same, no matter where it is located. Instead, the weight of the object will vary according to the force of gravity acting on it.
Weight is calculated as the product of the object's mass and the value of the gravitational acceleration:
W= m×g
In this case, you know:
m= 4.9 g×4= 19.6 g= 0.0196 kg → the mass of 4 washers in kilogramsg= 10 m/s²Replacing:
W= 0.0196 kg× 10 m/s²
Solving:
W= 0.196 N
Finally, if 4 washers are attached to the string, then the applied force on the car will be 0.196 N.
Learn more:
brainly.com/question/15566515?referrer=searchResults brainly.com/question/15271930?referrer=searchResults brainly.com/question/4735812?referrer=searchResultsAnswer:
C, B
Explanation:
Texting: what are two needs or wants that this wave technology meets it:
Answer:
bugs/viruses all the time and more social platforms
Explanation:
find the quotient 3^15 × 3^3
Answer:
3^15 / 3^3 = 3^12 * 3^3 / 3^3 = 3^12
The Law of Exponents applies here
3^15 x 3^3 is a product, not a quotient
3^15 x 3^3 = 3^18
What is the minimum number of overload units such as heaters, trip coils, or thermal cutouts allowed for a three-phase AC motor's protection
The minimum number of overload units for a three-phase AC motor's protection is THREE (3). It is a polyphase motor.
Three-phase motors are polyphase motors, which can be induction motors or synchronous motors.
A three-phase motor is organized to run on three-phase alternating current (AC) electrical power, which is required for diverse industrial devices that use a lot of electrical energy.
These motors (three-phase motor) are composed of a stator (the outer part), a rotor (rotating part), and the enclosure (the external skeleton).
Learn more about three-phase motors here:
https://brainly.com/question/14329442
friction and normal force are examples of
Answer:
Friction is a force that tends to oppose the relative motion between two bodies in contact. Frictional force always acts on a moving body from the direction opposite to the direction of motion. It opposes the motion, and therefore, helps to reduce the speed of the moving object. It is a contact force.
If a planet has an eccentricity of 0.92 and a distance of the major axis is 5,000,000 km, then what is the distance between foci?(1 point)
460,000,000 km
0.00000018 km
4,600,000 km
5,000,000 km
Answer:
it’s the third option: 4,600,000 km
Explanation:
just took the test and that was correct
What the number ??? Help Please
Answer:
first number is 113 and the second number is 15
car was moving in a straight road of length 320 km it covered 240 km with an average velocity 75 km/hr then it ran out of fuel and stopped for 0.6 hr until it was refueled and completed its journey with a velocity 100 km/hr so the average velocity during the whole journey
The average velocity of the car for the whole journey is 69.57 km/h.
The given parameters:
Length of the road, L = 320 kmDistance covered = 240 km at 75 km/htime spent refueling, t₂ = 0.6 hrFinal velocity, = 100 km/hrThe time spent by the before refueling is calculated as follows;
[tex]t = \frac{d}{v} \\\\t_1 = \frac{240}{75} \\\\t_1 = 3.2 \ hours[/tex]
The time spent by the car for the remaining journey;
[tex]t_3 = \frac{320 - 240}{100} \\\\t_3 = 0.8 \ hr[/tex]
The total time of the journey is calculated as follows;
[tex]t = t_1 + t_2 + t_3\\\\t = 3.2 \ hr \ + \ 0.6 \ hr \ + \ 0.8 \ hr\\\\t = 4.6 \ hours[/tex]
The average velocity of the car for the whole journey is calculated as follows;
[tex]v = \frac{total \ distance }{total \ time} \\\\v = \frac{320}{4.6} \\\\v = 69.57 \ km/h[/tex]
Learn more about average velocity here: https://brainly.com/question/6504879
-
In the balanced equation, 4KO2 + 2CO2 = 2K2CO3 + 302, which two chem-
icals have a molar ratio of 1:1?
The two chemical compounds having a molar ratio of 1 : 1 is CO₂ and K₂CO₃
4KO₂ + 2CO₂ —> 2K₂CO₃ + 3O₂
4 : 2 : 2 : 3
From the balanced equation above, the coefficients are 4, 2, 2, 3
A careful observation of the equation shows that CO₂ and K₂CO₃ exist in ratio 2 : 2 which can be simplified as 1 : 1
Therefore, we can conclude that CO₂ and K₂CO₃ has molar ratio of 1 : 1
Learn more about stiochoimetry: https://brainly.com/question/25830314
please help quick
How much work is done by the people in raising the load 3 meters if the combined pulling force of the men on the rope is 700 newtons?
A.233 N·m
B. 703 N·m
C. 2,100 N·m
D. 400 N·m
Answer:
C is the right answer for the question
ASAP!!!!!!!! Parts of a Microscope: Use the following word bank to identify the following parts of the microscope.
Body Tube
Ocular Lens ( eye piece)
Revolving Nose piece Arm
Objectives (three of these) Diaphragm
Stage clips
Stage
Light Source
Base
Course Adjustment Knob
Fine Adjustment Knob
Answer:
1. Body Tube
2.Revolving Nose Piece
3.Low Objective
4.Med Objective
5.High Objective
6.Stage clips
7.Diaphragm
8.Light source
9.Ocular lens
10. Arm
11.Stage
12.Coarse Adjustment knob
13.Fine Adjustment knob
14. base
Question 5. One 1,5V battery runs a portable MP3 player that draws 5,7mA of current
for about six hours before it runs out.
a) What is the resistance If the portable MP3 player?
b) How much power is dissipated in the portable MP3 player?
c) Find the energy delivered by the portable MP3 player?
Other than temperature, which property also has an effect on the rates of chemical reactions?
A.Color of reactants
B.Concentration of reactants
C.Solubility of reactants
D.Volume of reactants
Other than temperature, the property that also has an effect on the rates of chemical reactions is the concentration of the reactants. The correct answer is B
The rate of chemical reaction means how chemical react with respect to time or as a function of time. The rate of chemical reaction tells us the speed or how fast chemicals react.
There are many factors that can affect the rate of chemical reaction. Temperature is one of them. Increase in temperature will increase the rate at which chemical react.
The color of reactants, solubility of reactants and volume of reactants have nothing to do with the rate of chemical reaction.
Other than temperature, the property that also has an effect on the rates of chemical reactions is the concentration of the reactants.
Other factors affecting the rate of chemical reaction are:
the physical state of the reactants surface area temperature and the presence of a catalystTherefore, the correct answer is option B
Learn more about chemical reaction here: https://brainly.com/question/11231920?source=archive
