The electrical resistance of an element in a platinum resistance thermometer at 100°c, 0°c and room temperature are 75.00Ω, 63.00Ω and 64.992Ω respectively. Use the data to calculate room temperature

Answer:

Equivalent

A conversion factor is a ratio of equivalent measures

[tex]\sf\underline{Solution:}[/tex]

Here , the density of the material is 4g cm³ but it is not given in CGS system.

$\sf{As\:we\:know\:that:}$

$\sf\bold{Density=}$ $\sf\dfrac{Mass}{Volume}$

$\space$

[tex]\sf{Now,according \: to \:the\:question:}[/tex]

$\sf\small{Density\:of\:the\:material=4}$ $\sf\dfrac{g}{cm^2}$

$\space$

$\sf{It\:is\:given\:that:}$

In the system of units the mass is 100gram.

$\space$

Hence,

$\sf{The\:mass\:unit\:for\:4g=}$ $\sf\dfrac{4}{100}$ $\sf{units}$

$\space$

In the system of units,the length is 10cm.

Henceforth,

$\sf\small{The\:length \:for\:1cm\:units=}$ $\sf\dfrac{1}{10}$ $\sf{units}$

$\space$

☆ Substitute the required values in the given formula-

$\sf\purple{Density=}$ $\sf\dfrac\purple{Mass}\purple{volume}$

$\space$

$\sf\underline\bold{Density\:of\:the\:material:}$

= $\sf\dfrac{4/100}{1/10^3}$ $\sf\bold{units}$

$\space$

= $\sf\dfrac{4/100}{1/1000}$ $\sf\bold{units}$

$\space$

= $\sf\dfrac{4000}{100}$ $\sf\bold{units}$

$\space$

$\sf\underline\bold\blue{=40\:units}$

$\sf\small{Therefore,option\:2nd\:is\:correct!}$

_______________________________

Answer:

Given information:-

[tex]\clubsuit[/tex]The displacement of the cyclist will be shortest distance from his initial to final positions which is nothing but diameter of the circle = 2r

We know that,

[tex] \underline{ \boxed{ \sf{Speed = \frac{Distance \: covered }{Time \: taken}}}}[/tex]

[tex]\longrightarrow \sf{\frac{636 \times 3.14 m}{90s}} \\ \\ \longrightarrow \sf22.18 m/s[/tex]

[tex]\sf{Velocity = \frac{Displacement }{ Time} }[/tex]

[tex]\longrightarrow \sf{ \frac{2 \times 636m}{90s} } \\ \\ \longrightarrow \sf{14.13 \: m/s}[/tex]

Thank You :)

please mark me as brainiest p

Explanation:

Magnetic lines of force are closed curves. C) Outside the magnet their direction is from north pole to south pole and inside the magnet these are from south to north pole.

Answer:

Remember the relation:

Speed*Time = Distance.

We can estimate that the speed at which an earthquake "moves", in the surface, is:

S = 6km/s  (this is a low estimation actually)

Then if the wave is detected 12.5 minutes after the earthquake, we know that it traveled for 12.5 minutes before reaching the detector.

So we know the speed of the wave and the time it took to reach the detector, then we can use the equation:

Speed*Time = Distance.

to find the distance.

First, we should write the time in seconds

we know that:

1 min = 60 s

then:

12.5 min = 12.5*(60 s) = 750 s

Then, the wave traveled with a speed of 6 km/s for 750 seconds until it reached the detector, then the distance that it traveled is:

(6km/s)*750s = 4500 km

The distance between the detector and the site of the quake is around 4500 km.

Explanation:

FALSE

The first periodic table of elements Mendeleev created contained 63 elements.

Answer:

v = 333.26 m/s

Explanation:

Given that,

The frequency of the tuning fork, f = 262 Hz

It produces the third resonance position above a closed air column that is 1.59 m in length.

We need to find the speed of sound in tuning fork. Let it is f. The third resonance position corresponds to the fifth harmonic of the closed air column. The wavelength in third resonance is given by :

[tex]\lambda=\dfrac{4}{5}L\\\\=\dfrac{4}{5}\times 1.59\\\\=1.272\ m[/tex]

The speed of sound is :

[tex]v=f\lambda\\\\=262\times 1.272\\\\=333.26\ m/s[/tex]

So, the speed of sound is 333.26 m/s.

Answer:

The speed of sound is 555.44 m/s.

Explanation:

frequency of third resonance position, f''' = 262 Hz

length of pipe, L = 1.59 m (closed)

Let the speed is v.

The frequency of third resonance in closed organ pipe is

[tex]f''' =\frac{3 v}{4 L}\\\\262 = \frac{3 v}{4\times 1.59}\\\\v = 555.44 m/s[/tex]

Answer:

A dicot is a flowering plant that has one seed leaves. The monocot plants have a single cotyledon. Maize only has one cotyledon in their seed, so it's a monocot. Seeds having two Cotyles are mainly called a Dicot. A pea is a dicotyledonous plant, the seed (the pea itself) has two halves, cotyledons, hence dicot being 2.

Explanation:

One or more of the cotyledons are the first to appear from a germinating seed. Based on the number of cotyledons, botanists classify flowering plants (angiosperms) into :

a) plants with one embryonic leaf, termed monocotyledonous (monocots).

b) plants with two embryonic leaves, termed dicotyledonous (dicots).

Helpful Link:

https://www.vedantu.com/question-answer/in-pea-caster-and-maize-the-number-of-cotyledons-class-11-biology-cbse-5f626a17e5bde9062ff6d2a3

Answer: two uses of a wedge can be to tighten things as well as to lift things.

Explanation: because that is some things wedges (a mechanical tool) can do.

Answer: [tex]N43.2[/tex]

Explanation:

Given

Power consumption of bulb and water are [tex]60\ W[/tex] and [tex]240\ W[/tex]

If the Devices are on for four hours

Total power of devices [tex]60+240=300\ W[/tex]

Energy consumed for 4 hours is

[tex]\Rightarrow 300\times 4=1200 Wh\\\Rightarrow 1.2\ kWh[/tex]

For 30 days it is [tex]1.2\times 30=36\ kWh[/tex]

Cost for 30 days [tex]36\times 1.2=43.2\ N[/tex]

Answer:

λ = 610.6 nm

Explanation:

We are given;

Separation distance; d = 0.195 mm = 0.195 × 10^(-3) m

Interference pattern distance; D = 4.95 m

Width of the two adjacent bright interference; β = 1.55 cm = 1.55 × 10^(-2) m

Formula for the Fringe width is;

β = Dλ/d

Where;

λ is laser's wavelength

Thus;

λ = (d × β)/(D)

λ = (0.195 × 10^(-3) × 1.55 × 10^(-2))/4.95

λ = 610.6 × 10^(-9) m

λ = 610.6 nm

a) gia tốc = vf-vi / t

a = 14-10 / 20

a = 0,2ms⁻²

b) dưới dạng a = Δv / t

v = lúc

v = 0,2 × 40

v = 8ms⁻¹

như v = d / t

do đó d = vt

d = 8 × 40

d = 320m

hãy đánh dấu là trí óc nhất

Explanation:

The acceleration g varies by about 1/2 of 1 percent with position on Earth's surface, from about 9.78 metres per second per second at the Equator to approximately 9.83 metres per second per second at the poles.

Answer:

[tex]8.4 \times 10^{5}\; \rm J[/tex], assuming that there's no heat exchange between the washing machine and the environment.

Explanation:

Let [tex]m[/tex] denote the mass of water and [tex]c[/tex] the specific heat capacity of water. The energy required to raise the temperature of that much water by [tex]\Delta T[/tex] would be:

[tex]Q = c \cdot m \cdot \Delta T[/tex].

Washing at [tex]30\; \rm ^{\circ} C[/tex] would require a temperature change of [tex]\Delta T = 30\; \rm ^{\circ} C - 16\; ^{\circ} \rm C = 14\; \rm K[/tex].

Washing at [tex]50\; \rm ^{\circ} C[/tex] would require a temperature change of [tex]\Delta T = 50\; \rm ^{\circ} C - 16\; ^{\circ} \rm C = 34\; \rm K[/tex].

In both situations, [tex]c = 4.2 \times 10^{3}\; \rm J \cdot kg \cdot K^{-1}[/tex] while [tex]m = 10\; \rm kg[/tex].

Calculate the energy required in either situation:

Washing at [tex]30\; \rm ^{\circ} C[/tex]:

[tex]\begin{aligned}& Q({30\; ^{\circ} {\rm C}}) \\ &= c \cdot m \cdot \Delta T \\ &= 4.2 \times 10^{3}\; \rm J \cdot kg \cdot K^{-1} \times 10\; \rm kg \times 14\; \rm K \\ &= 588000 \times 10^{5}\; \rm J\end{aligned}[/tex].

Washing at [tex]50\; ^{\circ} {\rm C}[/tex]:

[tex]\begin{aligned}& Q({50\; ^{\circ} {\rm C}}) \\ &= c \cdot m \cdot \Delta T \\ &= 4.2 \times 10^{3}\; \rm J \cdot kg \cdot K^{-1} \times 10\; \rm kg \times 34\; \rm K \\ &= 1428000 \; \rm J\end{aligned}[/tex].

[tex]1428000\; \rm J - 588000\; \rm J = 8.4 \times 10^{5}\; \rm J[/tex].

option E

3m/s square

hope it helped u

Answer:

The speed of the first half is 75 km/h and for the second half is 50 km/h.

Explanation:

A person driving a car from a to b 90km apart for the first half of the distance travels with speed v1 the second half of the distance travels with a speed of v2=2v1/3. Calculate his speed per each the distance so that after 1.5 hours that person reaches b

Total distance, D = 90 km

Let the time for he first half is t and for the second half is t'.

Distance = speed x time

45 = v1 x t .... (1)

And

45 = v2 x t' .... (2)

Total time is T = t + t'

[tex]1.5 = \frac{45}{v_1}+\frac{45}{v_2}\\\\1.5 = \frac{45}{v_1}+\frac{3\times 45}{2v_1}\\\\1.5 = \frac{90+135}{2v_1}\\\\3v_1 = 225 \\\\v_1 = 75 km/h[/tex]

Now, v2 = 2 x 75/3 = 50 km/h

Answer:

dog

Explanation:

Explanation:

Given that,

Mass of an object, m = 250 g = 0.25 kg

Spring constant, k = 48 N/m

The amplitude of the oscillation, A = 5.42 cm = 0.0542 m

1. At equilibrium,

ma = kx

Where

a is the acceleration of the object

So,

[tex]a=\dfrac{kx}{m}\\\\a=\dfrac{48\times 0.0542}{0.25}\\\\a=10.4\ m/s^2[/tex]

2. The maximum speed of the object is :

[tex]v=A\omega\\\\v=A\sqrt{\dfrac{k}{m}}\\\\v=0.0542\times \sqrt{\dfrac{48}{0.25}}\\\\v=0.75\ m/s[/tex]

Hence, this is the required solution.

Answer:

Explanation:

mass of linebacker, m = 111 kg

initial velocity, u = 1.9 m/s

mass of quarterback, m' = 82 kg

initial velocity, u' = 3 m/s

(a) Let they are moving in the same direction, the velocity is v after collision.

Use conservation of momentum

m u + m' u' = (m + m') v

111 x 1.9 + 82 x 3 = (111 + 82) v

v = 2.4 m/s

Let they are moving in opposite direction, the velocity is v after collision.

Use conservation of momentum

m u - m' u' = (m + m') v

111 x 1.9 - 82 x 3 = (111 + 82) v

v = - 0.18 m/s

Answer:

68.6 m/s^2

Explanation:

1 g = 9.8 m/s^2

so

7 g × 9.8m/s^2 = 68.6

Answer:

Efficiency of a machine is 90% this means that the total energy produced to the machine only 90% is useful and given as a output.

Machines are not 100% efficient because some of the work done by a machine is used to overcome friction

Answer:

57

Explanation:

Answer:

please do write it in english

Answer:

D. crystalline solid that conducts current under certain conditions

Explanation:

Semiconductors are crystalline solids that has the ability to conduct electrical currents but on certain conditions e.g heat. The conduction of semiconductors is less than that of conductors (metals) but more than insulators (nonmetals), hence, they are said to be intermediates of conductors and insulators in terms of electrical conductivity.

Examples of semiconductors are silicon, boron, carbon, germanium, arsenic etc.

Answer:

He is suffering from hypermetropia.

Explanation:

There are some defects of vision.

Longsightedness of hypermetropia : It is the defect of vision in which the person is not able to see the nearby objects clearly but can see the far off objects clearly. This is due to the elongation of size of eye ball. It is cured by using convex lens of suitable focal length.

Nearsightedness or Myopia : It is the defect of vision in which a person is not able to see the far off objects clearly but can see the nearby objects clearly. It is due to the contraction in the size of eye ball. It is cured by using concave lens of suitable focal length.

So, Hideki is suffering from hypermetropia. So, he should use the convex lens of suitable focal length.  

Answer:

C

Explanation:

Answer:

4360 Kgm/s

Explanation:

Applying,

Ft = M-M'................. Equation 1

Where F = force, t = time, M = Final momentum, M' = Initial momentum.

make M the subject of the equation

M = Ft+M'............ Equation 2

From the question,

Given: F = 4000 N, t = 0.9 seconds, M' = 400 kg-m/s

Substitute these values into equation 2

M = 4000+(0.9×400)

M = 4000+360

M = 4360 kgm/s

Hence the final momentum is 4360 kgm/s

Answer:

Speed is a time for how long an object is moving

Velocity is the direction of an object

Answer:

(b) 1/sinƟ

Explanation:

A simple machine can be defined as a type of machine with no moving parts but can be used to perform work.

Basically, a simple machine allows for the transformation of energy into work. The six simple machines are; lever, wedge, pulley, screw, wheel and axle, and inclined plane.

Inclined plane is a simple machine set at an angle and then used to lift an object.

In Physics, the velocity ratio of a simple machine is calculated as a ratio of the distance moved by the effort to the vertical distance through which a load is raised.

Mathematically, the velocity ratio of an inclined plane of angle Ɵ, acting as a simple machine is given by the formula;

Velocity ratio (V.R) = 1/sinƟ

Basically, an increase in the angle of inclination (measured in degrees) of an inclined plane increases its velocity ratio.