What is the shape of SiH2O

Answer: Super idol

Explanation:

chinese malapoks

Answer:

1). Atoms of each element contain a characteristic number of protons. In fact, the number of protons determines what atom we are looking at (e.g., all atoms with six protons are carbon atoms); the number of protons in an atom is called the atomic number.

2) In contrast, the number of neutrons for a given element can vary. Forms of the same atom that differ only in their number of neutrons are called isotopes.

3) Together, the number of protons and the number of neutrons determine an element’s mass number: mass number = protons + neutrons. If you want to calculate how many neutrons an atom has, you can simply subtract the number of protons, or atomic number, from the mass number.

The solid that require the greatest energy input to melt by mass is the option;

Covalent network

Reason for the above answer is as follows;

The elementary particles of a solid are held together by bonds that require

an input of energy to unlock, and once broken, the particles are then able

to change location within their containing vessels with less restrictions

Types of bonds

a) Soluble in water b) Low melting point, b) Conduct electricity

a) High melting point temperature b) Non conductive of electricity c) Not soluble in water

a) High melting point temperature b) The liquid state and solution

conducts electricity c) Soluble in water

a) Low melting point b) Normally in the gaseous or liquid state b) Not water soluble

Therefore, the covalent network, and the solids ionic compounds require the most energy to melt, however, the strength of the ionic bond in an ionic compound is a factor the charges present and the sizes of the atom, while

the covalent network solid, are combined to form essentially as a single

molecule and therefore require the greatest heat energy input break the bonds of the molecule down in order to melt

Learn more about the properties of the different types of bonds here;

https://brainly.com/question/13510199

https://brainly.com/question/21628972

https://brainly.com/question/14823280

Answer:

  im getting 331.23

Explanation:

Element Number Mass Percet Composition

O            6         16.00  28.9828819853274

N             2         14.01 8.45937867946744

Pb             1        207.21 62.5577393352051

Answer:

In three mocelus 0.0001 gram.

Stoichiometry refers to the relationship between the moles of reactants and products.

This question must be solved using both stoichiometry and the gas laws

The reaction equation is;

2 Al(s) + 6 HCl(aq) --------> 2 AICI3, (aq) + 3 H2(g)

Number of moles of Al = 3g/27g/mol = 0.11 moles

According to the reaction equation;

2 moles of Al yields 3 moles of H2

0.11 moles of Al yields 0.11 * 3/2 = 0.165 moles

From the ideal gas equation;

PV=nRT

P = ?

n= 0.165 moles

V = 0.85 L

T = 297 K

R = 0.082 atmLK-1mol-1

P= nRT/V

P = 0.165 * 0.082 * 297/0.85

P= 4.73 atm

P1 = 4.73 atm

T1 = 297 K

V1 = 0.85 L

P2 = 1 atm

T2 =273 K

V2 =?

P1V1/T1 = P2V2/T2

P1V1T2 = P2V2T1

V2 = P1V1T2/P2T1

V2 =  4.73 * 0.85 * 273/1 * 297

V2 = 3.69 L

P1 = 760 mmHg

T1 = 273 K

V1 = 3.69

P2 = 438 mm Hg

T2 = 284.2 K

V2 =?

P1V1/T1 = P2V2/T2

P1V1T2 = P2V2T1

V2 = P1V1T2/P2T1

V2 = 760 * 3.69 * 284.2/438 *273

V2 = 797010.48/119574

V2= 6.67 L

https://brainly.com/question/1190311

Activation energy is the energy needed to begin breaking the bonds of reactants. Hence, option A is correct.

Activation energy is defined as the minimum amount of energy necessary to initiate a chemical reaction.

Hence, activation energy is the energy needed to begin breaking the bonds of reactants.

Learn more about activation energy here:

https://brainly.com/question/2410158

#SPJ5

Answer:

8.3 g

Explanation:

Step 1: Write the balanced equation

H₃PO₄ + 3 NH₃ ⇒ (NH₄)₃PO₄

Step 2: Calculate the moles corresponding to 5.5 g of H₃PO₄

The molar mass of H₃PO₄ is 97.99 g/mol.

5.5 g × 1 mol/97.99 g = 0.056 mol

Step 3: Calculate the moles of (NH₄)₃PO₄ produced

The molar ratio of H₃PO₄ to (NH₄)₃PO₄is 1:1. The moles of (NH₄)₃PO₄ produced are 1/1 × 0.056 mol = 0.056 mol.

Step 4: Calculate the mass corresponding to 0.056 moles of (NH₄)₃PO₄

The molar mass of (NH₄)₃PO₄ is 149.09 g/mol.

0.056 mol × 149.09 g/mol = 8.3 g

Answer:

Name the non-metal furthest to the left on the periodic table by its elemental name.

Name the other non-metal by its elemental name and an -ide ending.

Use the prefixes mono-, di-, tri-.... to indicate the number of that element in the molecule.

im prolly wrong

Explanation:

here's the answer to the question

Answer:

2 :free energy

Explanation:

I hope it is fine answer for you ☺️☺️☺️

Answer:

It is known that 1 mol of a molecule contains 6.023×1023 6.023 × 10 23 number of molecules. So, 0.25 moles of CO2 C O 2.

The correct option for the given question about Mole Concept is Na / 2 atom of oxygen.

In 1 mole number of molecules of CO₂ = Na (Avagadro Number)

In 0.25 mole number of molecules of CO₂ = 0.25 × Na molecules

In 1 molecule number of oxygen atom = 2 atom

In 0.25 × Na molecules number of oxygen atom = 2 × 0.25 × Na atom

In 0.25 × Na molecules number of oxygen atom = 0.5 × Na atom

So in 0.25 mole of CO₂ number of oxygen atom = Na / 2 atom

Thus we can conclude that in 0.25 mole of CO₂ number of oxygen atom will be Na / 2, where Na is Avagadro Number.

Learn more about Mole Concept here:

https://brainly.com/question/16488605

#SPJ2

Answer:

Explanation:

From the given information:

The surface area of the can = (30 × 20 × 2) +(20× 15 × 2) +(30 × 15 × 2)

= 1200 + 600 + 900

= 2700 cm²

Since 1 inch² = 0.155 inch²

The surface area in inches² = 2700 × 0.155 inch²

= 418.5 inches²

The total force can be determined by using the expression:

Force = Pressure ×Area

Force = 14.7 psi ×  418.5 inches²

Force = 6151.95 lbs

Yes, the gasoline can will be able to withstand the force.

Solution : An oxidation reduction (redox) reaction is a type of chemical reaction that involves a transfer of electrons between tow species an oxidaion reductin reaction is any chemical reaction in which the oxidation number of a molecule atom or ion changes by gaining or losing an electron

Answer:

-376 kJ

Explanation:

The first step equation:

[tex]\mathsf{N_{2(g)} + 3H_2{(g)} \to 2NH_3{(g)} \ \ \ \Delta H = -92\ kJ}[/tex]    ---- (1)

The second step equation:

[tex]\mathsf{NH_{3(g)} + 2O_2{(g)} \to HNO_3{(g)} +H_2O_{(g)} \ \ \ \Delta H = -330\ kJ}[/tex]      ---- (2)

To determine the enthalpy of formation for 1 mole of HNO₃ (nitric acid), we have the following.

From the above equations; let multiply equation (1) by 1 and equation (2) by 2.

[tex]\mathsf{N_{2(g)} + 3H_2{(g)} \to 2NH_3{(g)} \ \ \ \Delta H = -92\ kJ}[/tex]     ---- (3)

[tex]\mathsf{2NH_{3(g)} + 4O_2{(g)} \to 2HNO_3{(g)} +2H_2O_{(g)} \ \ \ \Delta H = 2(-330)\ kJ}[/tex]      ----- (4)

adding the above two equations, we have:

[tex]\mathsf{N_{2(g)} + 3H_2{(g)}+ 2NH_{3(g)} + 4O_{2(g)} \to 2HNO_{3(g)} + 2NH_3{(g)} +2H_2O_{(g)} \ \ \ \Delta H = (-660 \ kJ -92\ kJ)}[/tex][tex]\mathsf{N_{2(g)} + 3H_2{(g)} + 4O_{2(g)} \to 2HNO_{3(g)} +2H_2O_{(g)} \ \ \ \Delta H = (-752 \ kJ)}[/tex]

Now, from the recent equation, we have:

2 moles of nitric acid = -752 kJ

∴

1 mole of nitric acid will be: = (1 mole × (-752 kJ)) ÷ 2 moles

1 mole of nitric acid will be: = -376 kJ

Answer:

1) HNO3/H2SO4, 2) CH3CH2CH2Cl/AlCl3

Explanation:

Benzene is a stable aromatic compound hence it undergoes substitution rather than addition reaction.

When benzene undergoes substitution reaction, the substituent introduced into the ring determines the position of the incoming electrophile.

If I want to synthesize m-nitropropylbenzene, I will first carry out the nitration of benzene using HNO3/H2SO4 since the -nitro group is a meta director. This is now followed by Friedel Craft's alkykation using CH3CH2CH2Cl/AlCl3.

Answer:

HCl contain a polar covalent bond because H is more electropositive than Cl and Cl is more electronegative than H, resulting in a dipole moment

Answer:

[tex]\boxed {\boxed {\sf D. \ 0.25 \ M}}[/tex]

Explanation:

Molarity is a measure of concentration in moles per liter.

[tex]molarity= \frac{moles \ of \ solute}{ liters \ of \ solution}[/tex]

The solution contains 0.75 moles of sodium chloride and has a volume of 3.0 liters.

Substitute these values into the formula.

[tex]molarity= \frac{ 0.75 \ mol \ NaCl}{3.0 \ L}[/tex]

[tex]molarity= 0.25 \ mol \ NaCl/L[/tex]

Molarity has the molar (M) as its unit. 1 molar is equal to 1 mole per liter.

[tex]molarity= 0.25 \ M \[/tex]

The molarity of the solution is 0.25 Molar and Choice D is correct.

Answer:

█████████████████

█░░░░░░░░░░░░░░░█

█░░░░░░░░░░░░░░░█

█░░████░░░████░░█

█░░████░░░████░░█

█░░░░░░███░░░░░░█

█░░░░███████░░░░█

█░░░░███████░░░░█

█░░░░██░░░██░░░░█

█░░░░░░░░░░░░░░░█

█████████████████

───█░░░░░░░░░█───

───█░░░░░░░░░█───

───█░░░░░░░░░█───

───█░░░░░░░░░█───

───█░░░░░░░░░█───

───█░░░░░░░░░█───

───█░░░░░░░░░█───

───█░░░░░░░░░█───

───█░░░░░░░░░█───

───█░░░░░░░░░█───

───█░░░░░░░░░█───

█████████████████

█░░░░░░░█░░░░░░░█

█░░░░░░░█░░░░░░░█

█░░░░░░░█░░░░░░░█

█░░░░░░░█░░░░░░░█

Answer:

Option (3) 11

Explanation:

For more information:

https://brainly.com/question/569321

The reaction used to produce sugar in plants is Photosynthesis,

6CO₂ + 6H₂O + heat ⇆ C₆H₁₂O₆ + 6O₂↑

we can see that this reaction is endothermic, it absorbs heat to occur

If we were to add more heat or increase the temperature, the left side of the equilibrium will be able to react much more, which would produce more glucose (aka sugar)

Hence increasing the temperature will shift the equilibrium to the right or towards the Products

Answer:

Explanation:

The reaction that occurs in plants to create sugar can be represented by the following equation:

6 CO2 + 6 H2O ↔ C6H12O6 + 6 O2

It is called photosynthesis because the reaction requires light energy for the plant.  The reaction is controlled by enzyme within the plant. An increase in temperature will increase the collisions between enzyme and reactants; shifting the equilibrium towards the products, sugar and oxygen.

Answer:

The answer is "Option b".

Explanation:

H2 does have bond energy of 1, while Be2 has a covalent bond of zero. Be2 has eight electrons, each of which dwells in a distinct orbital. As just a result, four of them are linked molecular orbitals and two are antibonding molecular orbitals, respectively. As just a result, this molecule is unstable. This chemical orbital, with a bond order of 1, has just two electrons. As a result, it is a very solid substance. H2's bond length is higher than Be2's. Since it only has one electron, H2 is more stable than that of other compounds.

Answer:

21.3 g. Option B

Explanation:

The reaction is:

4HF(g) + SiO₂(s) → SiF₄(g) + 2H₂O(g)

We analysed it and it is correctly balanced.

4 moles of hydrogen fluoride react to 1 mol of silicon dioxide in order to produce 1 mol of silicon fluoride and 2 moles of water vapor.

We determine molar mass of each reactant:

HF → 1.01 g/mol + 19 g/mol = 20.01 g/mol

SiO₂ → 16 g/mol . 2 + 28.09 g/mol = 60.09 g/mol

We convert mass to moles: 16 g . 1 mol /60.09g = 0.266 moles of glass

Ratio is 1:4. 1 mol of glass react to 4 moles of HF

Our 0.266 moles may react to (0.266 . 4) / 1 = 1.07 moles of gas

We convert moles to mass: 1.07 mol . 20.01 g/mol = 21.3 g

Answer:

requiring immediate action or attention.

word similar to urgent: Acute

Answer:

to break down sugar in the presence of oxygen to release energy in the form of ATP

Explanation: i just finished this chapter of the class

Answer:

Aqueous workup.

Explanation:

The reaction of hexyl magnesium bromide with acetone yields a tertiary alcohol. There is an organic phase and an aqueous phase.

Aqueous workup is the process of recovering the pure tertiary alcohol from the organic phase of the system.

Hence, in order to complete the reaction of hexyl magnesium bromide with acetone, aqueous workup is required.

The question is incomplete. The complete question is :

An analytical chemist is titrating 148.9 mL of a 1.100 M solution of benzoic acid [tex]$HC_6H_5CO_2$[/tex]  with a 0.3600 M solution of KOH. The [tex]pK_a[/tex]  of benzoic acid is 4.20. Calculate the pH of the acid solution after the chemist has added 232.0 mL of the KOH solution to it. Note for advanced students: you may assume the final volume equals the initial volume of the solution plus the volume of KOH solution added.

Solution :

Number of moles of [tex]$C_6H_5OCOOH$[/tex] [tex]$=148.9 \ mL \times \frac{L}{1000\ mL} \times \frac{1.100 \ mol}{L}$[/tex]

                                                         = 0.16379 mol

Number of moles of NaOH added [tex]$=232.0 \ mL \times \frac{L}{1000\ mL} \times \frac{0.3600 \ mol}{L}$[/tex]

                                                         = 0.08352 mol

ICE table :

                     [tex]C_6H_5OCOOH \ \ \ + \ \ \ OH^- \ \ \ \rightarrow \ \ C_6H_5OCOO^- \ \ \ \ + \ \ H_2O[/tex]

I (mol)              0.16379                 0.08352              0

C (mol)           -0.08352              -0.08352            +0.08352

E (mol)            0.08027                    0                    0.08352

Total volume = (148.9 + 232) mL

                      = 380.9 mL

                     = 0.3809 L

Concentration of [tex]$C_6H_5OCOOH, [C_6H_5OCOOH]$[/tex] [tex]$=\frac{0.08027 \ mol}{0.3809 \ L}$[/tex]

                                                                               = 0.211 M

Concentration of [tex]$C_6H_5OCOO^- , [C_6H_5OCOO^-] =\frac{0.08352 \ mol}{0.3809 \ L}[/tex]

                                                                              = 0.219 M

[tex]pK_a[/tex] of [tex]C_6H_5OCOOH = 4.20[/tex]

According to Henderson equation,

[tex]$pH = pK_a + \log \frac{[C_6H_5OCOO^-]}{[C_6H_5OCOOH]}[/tex]

     [tex]$=4.20 + \log \frac{0.219}{0.211}$[/tex]

     = 4.22

Therefore, the pH of the acid solution is 4.22

Answer:

a) N2

b) They all have the same average kinetic energy.

Explanation:

At a given temperature, the speed of a gas molecule depends on its relative molecular mass. The heavier the gas, the lesser its average velocity at a given temperature. On that basis, N2 molecules are the fastest moving gas molecules.

At a particular temperature, all gases have the same average kinetic energy.

Answer:

In Haloarenes the C atom to which the X group is attached is SP2 hybridized thus it is become difficult to replace it by the Nucleophile. Since arenes and Vinyl halides are electron rich molecules due to presenceof n bonds, they repel Nucleophile attacking them.

Question:-

Why it is difficult for haloarenes to undergo nucleoplhilic subsituⁿ reaction?

Answer:-

Haloarenes are less reactive towards the nucleoplhilic substitution rxⁿ . This is due to following reasons :-

[tex]\red{\bigstar}\underline{\textsf{ Reason 1 :- Partial double bond character .}}[/tex]

Halogen atom has one lone pair, and due to presence of π - σ - lp , resonance is established in the compound ( see attachment) . Due to resonance there is a partial double bond character in the carbon halogen bond , so it is difficult to break a double bond than a single bond.

[tex]\rule{200}2[/tex]

[tex]\red{\bigstar}\underline{\textsf{ Reason 2 :- $\pi$ cloud .}}[/tex]

When a nucleoplhile comes to attack , it is repelled by the π-cloud of the benzene ring.

[tex]\rule{200}2[/tex]

[tex]\red{\bigstar}\underline{\textsf{ Reason 3 :- Phenyl cation .}}[/tex]

If somehow the halogen atoms leaves the benzene ring ,being more electronegative than carbon , it takes away the electron , thus a positive charge is left on benzene ring and the phenyl cation so formed is very unstable .

[tex]\rule{200}2[/tex]