Answer:
Sample answer: part 1:
What was your hypothesis?
This is what you wanted to prove or study with the experiment. Reading the question I can see that the experiment seems to study the relation between the viscosity of honey and the temperature, so the hypothesis may be something like:
"The viscosity of honey decreases as temperature increases".
According to your data, do you think your hypothesis was correct?
Here you need to see your experimental data, probably, you found that yes, as you increase the temperature the viscosity decreases.
The last thing we need to do here is to summarize difficulties and problems that you had in the experiment, and propose how you could solve them in order to have a better experiment.
Obviously, this depends on how you performed the experiment, but for example, if you saw that the temperature of the honey increased too fast, you could say:
"one problem was that the temperature of the honey increased too fast"
And one way to solve that would be submerging the honey in a water bath so the temperature increases a bit slower.
part 2:
Viscosity depends strongly on temperature, but this relation depends also on the given material.
Generally, we would see that the viscosity decays exponentially as the temperature increases.
So for the first question:
What effect did the temperature have on the viscosity of the honey?
You should have seen that, as the temperature increased, the viscosity decreased.
Now, we need to give some practical examples where knowledge of viscosity is important.
The first one is for cleaning: We know that if we increase the temperature, the viscosity decreases. Thus if we have some object with some viscous thing on it, increasing the temperature will cause it to be easier to clean.
Another example is to store/transport viscous things, for example, honey, it is actually a lot easier to pour honey in bottles if you first heat it a little, so it becomes less viscous.
So there you have two examples where knowing about viscosity (and how it relates to temperature) may be important.
Explanation:
The right of an individual or organization to initiate a court case, on the basis of having substantial stake in the outcome, is known as
Answer: The right of an individual or organization to initiate a court case, on the basis of having substantial stake in the outcome, is known as "standing"
Explain how energy changes in the spring toy below when it goes downstairs.
Given what we know, we can confirm that the spring toy uses the transfer of potential gravitational energy into kinetic energy of motion in order to fall down the stairs.
How does the toy do this?The toy stores potential energy. It does this using gravity. Once it begins to fall, it uses the momentum from each fall to continue to do so. With each fall, its stored potential energy is transferred to kinetic energy.Therefore, we can confirm that the spring toy uses its position at the top of each stair as a source of potential energy, which using the momentum from the last fall, it transfers into the kinetic energy of motion as it falls, all through the help of gravity.
To learn more about energy visit:
https://brainly.com/question/999862?referrer=searchResults
Using a balance, determine the mass of the ball and basket of the ballistic pendulum. Fire the ballistic pendulum
and measure the maximum height the pendulum reaches. Use the conservation of energy (initial KE + initial GPE =
final KE + final GPE; KE = 12mv2; GPE = mgh) to calculate the initial speed of the pendulum after the ball has
collided with the pendulum basket. Next, use the conservation of momentum (total initial p = total final p; p = mv)
to determine the initial speed of the ball before it collided with the pendulum basket.
=
=
The conservation of energy and moment allows to find the results for the velocity of the pendulum and the bullet in the system are:
The velocity of the pendulum (bullet + basket) is: v₀ = 1.98 m The speed of the bullet, depending on the mass are:m (kg) v (m / s)
0.05 41.58
0.10 21.78
0.15 15.18
0.20 11.88
0.25 9.90
The conservation of mechanical energy is one of the most important principles of physics, it establishes that if there is no friction force, the energy is constant at all points. Mechanical energy is the sum of the kinetic energy plus the potential energies.
In the attachment we can see a diagram of the system, let's start by finding the speed of the pendulum when it leaves, for this we use the conservation of energy.
Starting point. In the lowest part of the movement.
Em₀ = K = ½ (m + M) v₀²
Final point. At the top of the movement.
Em_f = U = (m + M) g y
Energy is conserved because there is no friction.
Em₀ = Em_f
½ (m + M) v₀² = (m + M) g y
[tex]v_o = \sqrt{2gy}[/tex]
They indicate a table with several measurements of the masses and the period, let's use the relationship of the simple harmonic motion.
y = y₀ cos wt
The period and the angular velocity are related.
w = 2π / T
we substitute
y = y₀ cos ( [tex]2 \pi \frac{t}{T}[/tex] )
Let's analyze how long it takes to reach the point of maximum height, the period is the time of a complete oscillation, therefore from the lowest point to the highest point we have ¼ of oscillation, consequently the time to the highest point.
t = T / 4
y = y₀ cos ( [tex]2 \pi 4[/tex])
y = y₀
Therefore the point of maximum amplitude coincides with the maximum height and must be average by the student, suppose that the height is
y₀ = 20 cm = 0.20 m
Let's calculate the initial velocity.
v₀ = [tex]\sqrt{2 \ 9.8 \ 0.20 }[/tex]
v₀ = 1.98 m / s
They ask for the speed of the bullet before striking the basket of mass
M = 1 Kg.
The conservation of the momentum that for an isolated system the momentum is constant in all the instants. Let's form the system by the bullet and the basket.
Initial instant. Before the crash
p₀ = m v
Final moment. Right after the crash.
P_f = (m + M) v₀
The momentum is conserved because the system is isolated.
p₀ = p_f
m v = (m + M) v₀
v = m + M / m v₀
they have tabulated various mass for the bullet, we calculate the speed of each bullet.
m = 0.05 kg
v = [tex]\frac{0.05+1}{0.05} \ 1.98[/tex]
v = 41.58 m / s
m = 0.10 kg
v = [tex]\frac{0.10+1}{0.10} \ 1.98[/tex]
v = 21.78 m / s
m = 0.15 kg
v = [tex]\frac{0.15+1}{0.15y}[/tex]
v = 15.18 m / s
m = 0.20 kg
v = 11.88 m / s
m = 0.25 kg
v = 9.9 m / s
In conclusion with the conservation of energy and the momentum we can find the results for the speed of the pendulum and the bullet in the system are:
The velocity of the pendulum (bullet + basket) is: v₀ = 1.98 m The speed of the bullet, depending on the mass are:m (kg) v (m / s)
0.05 41.58
0.10 21.78
0.15 15.18
0.20 11.88
0.25 9.90
Learn more about conservation of energy and momentum here: brainly.com/question/25849204
How far does an object travel if it is moving at a speed of 4 m/s for 3.2 seconds?
Answer:
12.8 meters
Explanation:
m/s means meters per second. So, to find how far it would travel in 3.2 seconds, you would multiply 4 meters every second by 3.2 seconds.
4×3.2=12.8 meters
Please help!!!!!!!!!!!!!!! I will brainless for all 3 done
Answer:
1) 2 2)5 3)2 or 5
Explanation:
i dont have one
What are inert gases with example
Answer:
Inert gases:An inert gas is a gas that is unreactive in its environment. The noble gases (helium, neon, argon, krypton, xenon, and radon) are considered inert in most applications. Argon is the cheapest noble gas and thus the most frequently used. In applications insensitive to chemical reactions with nitrogen, even nitrogen gas (N2) may be used as inert gas.Explain the relationship between pitch and frequency.
Answer:
Though pitch and frequency are not equivalent, they are correlated. This means that as one goes up, the other does as well. A higher frequency produces a higher pitch, and a lower frequency produces a lower pitch.
Explanation:
an object moves 15.0 m north and then 11.0 m south. find both the distance it has traveled and the magnitude of its displacement.
A battery is connected in series with an ammeter and a variable resistor R.
When R= 6.0 ohms, the current in the ammeter is 1.0 A. When R= 3.0 ohms, the current is 1.5 A.
Calculate the internal resistance of the battery.
A. 6.0 ohms
B. 1.5 ohms
C. 4.5 ohms
D. 3.0 ohms
A train starts at rest and ends up with 1500 J of kinetic energy. How much work was done on the train?
Answer:
1500 J
Explanation:
Apparently, we're to assume that no energy is lost to friction or other effects. Then all of the energy the train has is due to work being done on it.
1500 J of work was done on the train
12. A lathe mounted on wooden skids is to be slid down a pair of planks placed against the back of a truck.
(a) If the coefficient of friction is 0.28, what angle should the planks make with the ground in order for the lathe to slide down at constant velocity?
(b) When the planks are at this angle, will the lathe start to slide down of its own accord?
(a) The angle the planks make with the ground in order for the lathe to slide down at constant velocity is 90⁰.
(b) Yes, at this angle the lathe will start sliding at constant velocity because of the sharp steepness.
The given parameters:
coefficient of friction, μ = 0.28The net force on the wooden skids is calculated as follows;
[tex]\Sigma F = 0\\\\F - \mu mg cos\theta = 0\\\\ma - \mu mg cos\theta = 0\\\\ma = \mu mg cos \theta \\\\a = \mu g cos\theta\\\\at \ constant \ velocity , \ a = 0\\\\0 = \mu g cos \theta\\\\cos \theta = 0\\\\\theta = 90 ^0[/tex]
Yes, at this angle the lathe will start sliding at constant velocity because of the sharp steepness.
Learn more about coefficient of friction here: https://brainly.com/question/14121363
How long does it take a car traveling at 45km/h to travel 100.0 m?
Answer:
8 seconds
Explanation:
Since the carspeed is in km/h, we need equal units, so we will make 100.0m 0.1000km.
Then we need to find how long it takes the car to travel 0.1km
We can use the formula distance=speed * time and get
0.1=45 * time
Therefore we get .002222... hours
Multiplying this by 3600 (to get seconds, 60x60), we get 8 seconds
Answer:
8m/s
Explanation:
speed = 45km/h
Distance = 100m
we have to find time = ?
Formula for speed is = Distance/ Time
Here Distance is given in 'm' so we need to convert speed value in 'm'
So to convert km/h in m formula is divide 45km/h by 3.6 then the km/h value gets converted in m so now the value is 12.5 m/s
So now,
speed = Distance/Time
we have to find Time
Then,
Time = Distance/ Speed
= 100/12.5
= 8m/s
Describe the way that distance is changing in relation to tiMe
Answer:
DistaNcE chanGes iN relAtiOn tO TiMe Bc ThE fuRthEr yOu Go ThE mOrE TiMe goeS bY
What is chemical reaction? Give an example of each of exothermic and endothermic reaction
Answer:
A chemical reaction is a process that occurs when two or more molecules interact to form a new product(s).
Endothermic reactions are chemical reactions in which the reactants absorb heat energy from the surroundings to form products.
Example:
A popular example of an endothermic chemical reaction is photosynthesis. During this process, plants absorb energy from the Sun and convert it into carbon dioxide and water into glucose and oxygen.
An exothermic reaction releases energy into the surrounding of the system.
Example:
the chemical reaction between sodium and chlorine results in the formation of sodium chloride (also known as common salt).
plz help! ill give brainlyest to whoever gets this correct!
Two carts move directly toward one another on an air track. Cart 1 has a mass of 0.35 kg and a speed of 1.2 m>s. Cart 2 has a mass of 0.61 kg and a speed of 0.85 m>s. What is the total momentum of the system, assuming that cart 1 moves in the positive direction?
A baseball player at practice is pushing a tackling dummy across the field. He initially has to push the 130 kg dummy with 600 Newton’s of force to get it to start moving and maintain a force of 475 to keep it moving at a steady state. What are the coefficient of friction static and kinetic with the dummy on the ground
.
Answer:
Static= 600/(130*9.8)=0.47
Kinetic=475/(130*9.8)=0.37
Which turn (left or right) requires the truck to slow down more in order to make the turn safely? Explain your answer using appropriate relationships.
What size resistor would produce a 3 amp current flow with a 12 volt battery?
Resistance = volts / amps
Resistance = 12 volts / 3 amps
Resistance = 4 Ohms
Answer: 4 Ohms
3. Which is not an example of energy
(5 Points)
light
thermal
heat
chemical
Answer:
Heat, Chemical
Answer:
heat is not an energy is a process.
Explanation:
define Newton's law of motion
By definition, Newton's First Law, also called the Law of inertia, indicates that "Every body perseveres in its state of rest or of uniform rectilinear motion unless it is forced to change its state by forces impressed on it."
This means that for a body to come out of its state of rest or of uniform rectilinear motion, it is necessary for a force to act on it.
Definition of inertiaSo, in other words, all bodies are opposed to changing their state of rest or motion and this opposition is called inertia.
Body in equilibriumIn this way, a body is in equilibrium when the resultant of the forces acting on it is zero. That is, it is not possible for a body to change its initial state (be it rest or motion) unless one or more forces intervene.
Learn more about Newton's Laws:
https://brainly.com/question/13230056?referrer=searchResults
In the Bohr model of the hydrogen atom, the speed of the electron is approximately 2.2 106 m/s.
Find the central force acting on the electron as it revolves in a circular orbit of radius 4.63 x 10-11 m.
Answer in units of N.
The central force acting on the electron as it revolves in a circular orbit is [tex]9.52 \times 10^{-8} \ N[/tex].
The given parameters;
speed of electron, v = 2.2 x 10⁶ m/sradius of the circle, r = 4.63 x 10⁻¹¹ mThe central force acting on the electron as it revolves in a circular orbit is calculated as follows;
[tex]F = \frac{M_e v^2}{r} \\\\[/tex]
where;
[tex]M_e[/tex] is mass of electron = 9.11 x 10⁻³¹ kg
[tex]F = \frac{(9.11 \times 10^{-31}) \times(2.2\times 10^6)^2 }{4.63 \times 10^{-11}} \\\\F = 9.52 \times 10^{-8} \ N[/tex]
Thus, the central force acting on the electron as it revolves in a circular orbit is [tex]9.52 \times 10^{-8} \ N[/tex].
Learn more about centripetal force here:https://brainly.com/question/20905151
During chemical reactions, bonds between atoms break and form. What does this mean in terms of subatomic particles? (1 point)
O Electrical fields of charged particles interact, bonding those with the same charge.
Electrical fields of neutral particles interact, bonding those with opposite charges.
O Electrical fields of neutral particles interact, bonding those with the same charge.
o Electrical fields of charged particles interact, bonding those with opposite charges
During chemical reactions, bonds between atoms break and form Electrical fields of charged particles interact, bonding those with opposite charges.
What is the chemical bonds?During chemical reactions, bonds between atoms break and form Electrical fields of charged particles interact, bonding those with opposite charges.
Since we know that every element have electrons in their atoms and every atom have vacant shells.
So during chemical reactions the elements fulfill their vacant shells and form bonds between each other it can be ionic or it can be covalent bond.
But when atoms breaks the bond their will be the positively or negatively charged electrons left in the atoms.
Hence During chemical reactions, bonds between atoms break and form Electrical fields of charged particles interact, bonding those with opposite charges.
To know more about chemical bonds follow
https://brainly.com/question/819068
3) A 14 kg object is sitting at the top of a hill that is 100 m high. What is the potential energy of the
object?
Answer:
13,720 joules
Explanation:
Epotential = mgh
mass x gravity x height
Ep= 14 x 9.8 x 100
Ep=13,720 joules
explain maximum and minimum thermometer working(answer only for points will be reported)
Explanation:
Six’s Maximum and Minimum thermometer is a U shaped parallel tube made up of glass. One side registers the maximum temperature and the other side records the minimum temperature.The bend at the bottom of the thermometer contains mercury which moves up or down based on the expansion and contraction of alcohol.When the temperature rises, the alcohol expands and pushes the mercury up the maximum column. This also pushes the mercury down in the minimum column.Similarly, when the temperature falls, the alcohol contracts and pulls the mercury up in the minimum column resulting in a fall of mercury in the maximum column.The steel indexes are located on the surface of mercury. They move along with the flow of mercury up and down.When the temperature reaches its maximum and minimum limits, the metal indexes remain at that place. This helps in recording the maximum and minimum temperatures of the day.Write any three facts in the support of molecular theory
Answer:
Every gas is made up of very small particles called molecules. Molecules of a gas are separated from each other by large distances so that volume is negligible as compared to total volume of gas. The force of gravitation on the molecules is also negligible.
Hope that helps. x
:
The magnitude of acceleration due to gravity is
Select one:
a. 9.8 m/s
b. 8.9 m/s2
c. 4.6 m/s
Answer:
The magnitude of a gravity is always 9.8 which is later approximated to 10m/s.
Answer:
a. 9.8
Explanation:
The magnitude of acceleration due to gravity is 9.8
???????????????????????????????????
An object accelerates 2 m/s2 when an unknown force of 20 N is applied to it. What was the mass of the object?
Answer:
10 kgExplanation:
The mass of an object given only the force acting on it and it's acceleration can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force in N
a is the acceleration in m/s²
We have
[tex]m = \frac{20}{2} = 10 \\ [/tex]
We have the final answer as
10 kgHope this helps you
free tingsssssssssss
Explanation:
yayyy thx u soo muchihuhuhu
Answer:
thx
Explanation:
The mass of a water skier is 54 kg. Calculate his/her weight if the gravitational field strength is 10 N/kg.
Answer:
weight=mass×gravity
the mass in this question is 54kg and the gravity is 10
therefore:
w=54×10
=540N
I hope this helps
