A 117 kg horizontal platform is a uniform disk of radius 1.61 m and can rotate about the vertical axis through its center. A 62.5 kg person stands on the platform at a distance of 1.05 m from the center, and a 28.3 kg dog sits on the platform near the person 1.43 m from the center. Find the moment of inertia of this system, consisting of the platform and its population, with respect to the axis.

Answers

Answer 1

Answer:

I_syst = 278.41477 kg.m²

Explanation:

Mass of platform; m1 = 117 kg

Radius; r = 1.61 m

Moment of inertia here is;

I1 = m1•r²/2

I1 = 117 × 1.61²/2

I1 = 151.63785 kg.m²

Mass of person; m2 = 62.5 kg

Distance of person from centre; r = 1.05 m

Moment of inertia here is;

I2 = m2•r²

I2 = 62.5 × 1.05²

I2 = 68.90625 kg.m²

Mass of dog; m3 = 28.3 kg

Distance of Dog from centre; r = 1.43 m

I3 = 28.3 × 1.43²

I3 = 57.87067 kg.m²

Thus,moment of inertia of the system;

I_syst = I1 + I2 + I3

I_syst = 151.63785 + 68.90625 + 57.87067

I_syst = 278.41477 kg.m²


Related Questions

Using deductive reasoning, write the converse, inverse, and contra positive of an if-then statement. Part I: Write an if-then statement below. (1 point)

Answers

Converse:

if q , then p

Inverse:

If not p , the not q.

Contra Positive:

If not q, then not p.

If then statement is a conditional statement. In this statement there is some condition at the first part of the sentence and then in the second part there is a conclusion.

The example of if then sentence is as follows,

If this camel is thirsty, then it will drink water from the well.

In this example there is a condition in first part that if camel is thirsty, in the second part there is conclusion which states that then it will drink water from well.

Learn more at https://brainly.com/question/24294393

10. Match the following varibles to their relationship in Newton's 2nd Law. Questions 1. Force and Acceleration 2. Mass and Acceleration 3. Speed and Distance Answer Choices A. Direct Relationship B. Inverse Relationship C. Not in Newton's 2nd Law​

Answers

Explanation:

based on the above information

1.A

2.B

3. C

How is the potential difference same in capacitors arranged in parallel combination?​

Answers

Answer:

Potential difference across capacitors in parallel

Two or more capacitors are said to be connected in parallel if each one of them is connected across the same two points. In a parallel combination of capacitors potential difference across each capacitor is same but each capacitor will store different charge.

How long can a tow rope or chain be?
1. 20 feet 2. 15 feet
3. 5 feet
4. 10 feet

Answers

Answer:

"For towing, a tow chain should be of a length that keeps both vehicles within the maximum 4.5 meter distance, also  tow chains an be any length 20 foot chains are often chosen"  

Explanation:

-  https://letstowthat.com

Also Quick note the feet of tow rope or chain varies on the situation but most longest or 20 feet.  

If a roller coaster train has a potential energy of 1,500 J and a kinetic energy of 500 J as it starts to travel downhill, what is its total energy

Answers

Its total mechanical energy is 2,000 J.

We don't have enough information to say anything about its heat energy, its chemical energy, or the energy due to any electrical charge it may be carrying or any magnetic field it may have.

the value of 1.0004 to the power 1 by 2 using Binomial approximation is​

Answers

Given:

The given value is [tex](1.0004)^{\frac{1}{2}}[/tex].

To find:

The value of the given expression by using the Binomial approximation.

Explanation:

We have,

[tex](1.0004)^{\frac{1}{2}}[/tex]

It can be written as:

[tex](1.0004)^{\frac{1}{2}}=(1+0.0004)^{\frac{1}{2}}[/tex]

[tex](1.0004)^{\frac{1}{2}}=1+\dfrac{1}{2}\times 0.0004[/tex]      [tex][\because (1+x)^n=1+nx][/tex]

[tex](1.0004)^{\frac{1}{2}}=1+0.0002[/tex]

[tex](1.0004)^{\frac{1}{2}}=1.0002[/tex]

Therefore, the approximate value of the given expression is 1.0002.

A 15.0 cm object is 12.0 cm from a convex mirror that has a focal length of -6.0 cm. What is the height of the image produced by the mirror?
• -5.0 cm
• 7.5 cm
• -7.5 cm
• 5.0 cm

Answers

Answer:

5.0cm

Explanation:

To get the height of the image, we will use the magnification formula as shown:

m = Hi/H = v/u

Hi is the image height

H is the object height

v is the image distance

u is the object distance

First, we need to get the image distance v

Using the mirror formula;

1/f = 1/v+ 1/u

1/-6 = 1/v + 1/12

1/v = -1/12 - 1/6

1/v = -1-2/12

1/v = -3/12

v = 12/-3cm

v = -4cm

Next is to get the image height Hi

Using the expression;

Hi/H = v/u

Hi/15 = 4/12

Hi/15 = 1/3

3Hi = 15

Hi = 15/3

Hi = 5.0cm

Hence the image height is 5.0cm

Answer:

D. 5.0 cm

Explanation:

got it correct on the test

(6). A car travels in a straight line from city A to city B at a speed of 60kmh-1

. Then return

from city B to city A along the original route at a speed of 40kmh-1

. The distance between

the two cities is 120 km. What is the average speed of the vehicle?

1. 30kmh-1

2. 45kmh-1

3. 48kmh-1

4. 60kmh-1​

Answers

i think that the answer is 4. 60kmh!

a skydiver of mass 80kg jumpes from a plane. Taking g=m/s^2 write down the weight of skydiver

Answers

Answer:

800N

Explanation:

as we know that

weight = mass × acceleration due to gravity

= 80kg × 10 m/s^2

= 800N.

Group elements number 11 to 20 as either metallic, non metallic or metalloid.​

Answers

Answer:

The elements are grouped into the different substances by color. As you can see, Lithium, Beryllium, Sodium, Magnesium, Aluminum, Potassium, and Calcium are metals out of the first 20 elements.

Hydrogen, Helium, Carbon, Nitrogen, Oxygen, Fluorine, Neon, Phosphorus, Sulfur, Chlorine, and Argon, are non-metals within the first 20 elements.

Boron and Silicon count as Metalloids in the Periodic Table (properties of both metals and non-metals)

reference- socatric q and a

Explanation:

Answer:

(11-13) - Metals

(14) - Metalloid

(15-18) - Non- metals

(19-20) - Metals

Explanation:

The elements from 11 to 13 are metals. They are Sodium(Na), Magnesium(Mg) and Aluminum(Al) respectively.

The element 14 is a metalloid. It’s Silicon(Si).

The elements from 15 to 18 are non metals. The 18th element is a noble gas known as Argon(Ar).

The elements from 15 to 17 are Phosphorus(P), Sulphur(S) and Chlorine(Cl).

The elements from 19 to 20 are metals. They are Potassium(K) and Calcium(Ca).

the masses of your hand and your notebook are quite small, so the force of attraction between them is

Answers

The force of attraction is decreased

Which solution has the greatest number of hydrogen ions?

blood, pH = 7.2
lemon juice, pH = 2
soda, pH = 3.5
bleach, pH = 13.5

Answers

Answer:

lemon

Explanation:

the lower the number the hier hydrogen ions

Answer: B

Explanation:

Many people believe that if the human race continues to use energy as we are now, without change, we'll witness a significant worldwide environmental impact in this century. Research this topic and discuss this possibility. Include concrete examples of specific environmental consequences of global warming.

Answers

Answer:

It is correct to say that if the human race continues to use energy as it is now, without change, we will witness negative environmental impacts around the world in this century.

As a concrete example, we can cite the means of transport that use fossil fuels, such as cars and buses, which release polluting gases into the atmospheric layer and cause the greenhouse effect, contributing to global warming.

To solve these problems, it is necessary to raise the awareness of individuals, so that there is more and more interest and search for environmentally responsible solutions, such as the large-scale production of electric cars, which do not pollute the environment.

Which two statements are true about a system?

a)A system is a group of objects analyzed as one unit.
b)Energy that moves across system boundaries is conserved.
c)There’s only one way to define the boundaries of a system.
d)All systems are made by humans.

Answers

A and c

Because it defines the boundaries of the system

A race car sits on the starting line on a racetrack. when the race starts, the car's tires exert a force on the track. According to newton's third law of motion, what causes the car to accelerate forward?
A. the track surface exerts a force that is larger and in the same direction as the force exerted by th tires.
B. a normal force that is equal in a magnitude to gravity pushes up on the car
C. the force of friction between the car tires and the track pulls the car forward
D. the track exerts a force that is equal and in the opposite direction as the force exerted by the tires

Answers

Answer:

D. the track exerts a force that is equal and in the opposite direction as the force exerted by the tires

Explanation:

Newton's third law of motion states that for every action, there is an equal and opposite reaction. This speaks of equality in magnitude of force applied but in an opposite direction to one another.

According to this reaction, a car's tires exert a force on the track, this means that in accordance to Newton's third law, the track must exert an equal but opposite force on the car's tires. This causes the car to accelerate forward.

: Chuyển động Một vật xuất phát từ A chuyển động đều về B cách A 240 m với vận tốc 10 m/s. Cùng lúc đó, một vật khác chuyển động đều từ B về A. Sau 15 s hai vật gặp nhau. Tìm vận tốc của vật thứ hai và vị trí hai vật gặp nhau. ​

Answers

mân, whát thē hęll böį

the force between the earth and the body which is at a distance r from the center of the earth is F. What must be this distance for the force to be doubled.

Answers

Answer:

Explanation:

The gravitational force between the earth and another body is F = -GM_em/r^2 r where G = 6.67 times 10^-11 Nm^2/kg^2 is the gravitational constant, M_e = 5.97 times 10^24 kg is the mass of the earth, m is the mass of the other body, and r is the position vector of the second body with respect to the centre of the earth.

Describe the laws of liquid pressure and Explain the term fluid. (Please give the correct answer, it's really urgent)​

Answers

Answer:

The laws of liquid pressure are  

(i) Pressure inside the liquid increases with the depth from the free surface of the liquid.

(ii) Pressure is same at all points on a horizontal plane, in case of stationary liquid.

(iii) Pressure is same in all directions about a point inside the liquid.

(iv) Pressure at same depth is different in different liquids. It increases with the increase in the density of the liquid.

(v) A liquid will always seek its own level.

A Fluid is any liquid or gas or generally any material that cannot sustain a tangential, or shearing, force when at rest.  

Explanation:

An airplane starts from rest and undergoes a uniform acceleration of 10.8 m/s^2 for 16.7 s seconds before leaving the ground. What is its displacement?

Answers

Answer:

3012.012m

Explanation:

s=it +1/2(10.8)(16.7)^2

What is an effect of continental drift?

Answers

Answer:  An effect of continental drift is causing tectonic plates resting upon the convecting mantle to move which results in natural disasters like earthquakes, volcanic eruptions, and more.

Explain how a submarine
floats on the water surface
and dives down into water.

Answers

Answer:

A submarine uses tanks that are filled with compressed air and when it is needed the air is released and takes on water which increase the density making it sink but when the water is pushed out the sub marine density is decreased making it float

Câu 1. Con lắc lò xo treo thẳng đứng, dao động điều hòa với biên độ 2cm và tần số góc 20 rad/s. Chiều dài tự nhiên của lò xo là 30cm. Chiều dài nhỏ nhất và lớn nhất của lò xo trong quá trình dao động là bao nhiêu? Lấy g = 10m/s2.

Answers

Answer:

28 cm and 32 cm

Explanation:

1. The spring pendulum hangs vertically, oscillates harmonic with amplitude 2cm and angular frequency 20 rad/s. The natural length of

a spring is 30cm. What is the minimum and maximum length of the spring during the oscillation? Take g = 10m/s2.

As the amplitude is 2 cm and the natural length is 30 cm. So, it oscillates between 30 -2 = 28 cm to 30 + 2 = 32 cm.

So, the minimum length is 28 cm and the maximum length is 32 cm.

What did Ernest Rutherford's experiment of a beam of alpha particles aimed
at a sheet of gold foil lead him to conclude?
A. The theory that atoms were the building block of all matter was
correct.
B. The majority of the atom's mass and its positive charge are
concentrated in the atom's center.
C. An electron has a larger mass than the alpha particles, causing
them to reflect upon collision.
D. J.J. Thomson's theory of electrons suspended in a sea of
positively charged particles was correct.

Answers

Answer:

B - Only a concentration of mass in the nucleus could explain the deflection of the incident particles.

A 0.36 kg object, attached to a spring with constant k=10n/m, is moving on a horizontal frictionless surface in simple harmonic motion of amplitude 0.082 m. What is it speed when it’s displacement is 0.041 m

Answers

Answer:

The speed of the object when displacement is 0.041 meters is 0.375 meters per second.

Explanation:

First, we need to determine the angular frequency of the system ([tex]\omega[/tex]), in radians per second:

[tex]\omega = \sqrt{\frac{k}{m} }[/tex] (1)

Where:

[tex]k[/tex] - Spring constant, in newtons per meter.

[tex]m[/tex] - Mass, in kilograms.

If we know that [tex]k = 10\,\frac{N}{m}[/tex] and [tex]m = 0.36\,kg[/tex], then the angular frequency of the system is:

[tex]\omega = \sqrt{\frac{10\,\frac{N}{m} }{0.36\,kg} }[/tex]

[tex]\omega \approx 5.270\,\frac{rad}{s}[/tex]

The kinematic formulas for the position ([tex]x(t)[/tex]), in meters, velocity ([tex]\dot x(t)[/tex]), in meters per second, and acceleration of the object ([tex]\ddot x(t)[/tex]), in meters per square second, are:

[tex]x(t) = A\cdot \cos \omega t[/tex] (2)

[tex]\dot x(t) = -\omega \cdot A \cdot \sin \omega t[/tex] (3)

[tex]\ddot x(t) = -\omega^{2}\cdot A \cdot \cos \omega t[/tex] (4)

Where [tex]A[/tex] is the amplitude of the motion, in meters.

From (2) we determine the time associated with position [tex]x(t) = 0.041\,m[/tex] ([tex]\omega \approx 5.270\,\frac{rad}{s}[/tex], [tex]A = 0.082\,m[/tex]):

[tex]t = \frac{1}{\omega}\cdot \cos^{-1} \left(\frac{x(t)}{A} \right)[/tex] (5)

[tex]t = \frac{1}{5.270\,\frac{rad}{s} }\cdot \cos^{-1}\left(\frac{0.041\,m}{0.082\,m} \right)[/tex]

[tex]t = 0.199\,s[/tex]

And the speed of the object is:

[tex]\dot x(t) = -\left(5.270\,\frac{rad}{s} \right)\cdot (0.082\,m)\cdot \sin \left[\left(5.270\,\frac{rad}{s} \right)\cdot (0.199\,s)\right][/tex]

[tex]\dot x(t) \approx -0.375\,\frac{m}{s}[/tex]

The speed of the object when displacement is 0.041 meters is 0.375 meters per second.

The hair dryer has a plastic case so there is no need for an earth wire connection in the plug ,explain why the hair dryer is still safe to use.

Answers

Answer:

plastics are unable to conduct electricity and heat due to there being no free flowing electrons, meaning they are safe to use.

Explanation:

How does the electric field intensity vary with the increase of distance of the point from the centre of a charged conducting sphere? Explain with graph.​

Answers

Answer:

(i)  Electric field outside the shell:

For point r>R; draw a spherical gaussian surface of radius r.

Using gauss law, ∮E.ds=q0qend

Since E is perpendicular to gaussian surface, angle betwee E is 0.

Also E being constant, can be taken out of integral.

So, E(4πr2)=q0q

So, E=4πε01r2q

Highlight 2 factors which shows that heat from the sun does reach the earth surface by convection

Answers

Radiation

When the sun radiation fall on the earth and it’s objects they receive heat energy and hence get heated thus the sun heat reaches the earth by = The process of radiation

How does the comets energy change as it moves from point a to point d

Answers

Answer:

At point A, the comet has the least kinetic energy because the comet is resting. 3. From point B to point D its orbit's potential energy is decreasing and its kinetic energy is increasing meaning it's moving more and more

Resistivity of metallic wire
depends on
*
It's length

It's shape
It's thickness
Nature of material​

Answers

Answer:

nature of material

hope this help you

Who would most likely be required to work with sodium hydroxide?

Answers

Answer:

a plumber

Explanation:

Other Questions
Mason wants to include a variety of graphic designs in his digital portfolio. What type of software does Mason need?Mason needs [Blank] processing software. please help meits urgent :) A facility with 40 beds needs the following aide coverage: Write Essay on:Problems of urban life100 words onlyQUestionByEDmPlay^6OfHalfedDriveFlacerzCityieSerIEs Solve the following equation |2x+3|+|x-2|=6x Use the tables below to show the difference between the results of a natural join, an equijoin (with PROF_CODE = 2) and a full outer join. Provide the resulting table of each join Why Was the constitution of the kingdom of Nepal 2015 replaced so soon? how did Asian Americans, Hispanic Americans, Women, and Dissenters react to the way they were treated in World War 1 6a3-5b2+2c2-3a2bc if a=5 b=2c=-1 Find the angle that has tangent,1.000.Give your answer correct to two significant figures Find the surface area of the prism. Please help ! I only have 30 more minutes sepak bola mini termasuk jenis permainan bola please helpppppp I will give brainlist define migration in brief the heat treatment process depends on 3 steps according to the time-temperature cycle. Name and Briefly describe each one I was very worm,so I ... may coat (takeoof) Explain how individuals differences can lead to people acting more or less drunk Assume that Corn Co. sold 7,600 units of Product A and 2,400 units of Product B during the past year. The unit contribution margins for Products A and B are $34 and $59, respectively. Corn has fixed costs of $378,000. The break-even point in units is a.9,450 units b.11,340 units c.7,560 units d.14,175 units please help me answer this math question, it is really important