Answer:
Zero
Explanation:
A pi bond involves: Select the correct answer below: direct orbital overlap with the electron density concentrated along the internuclear axis. side-by-side, or lateral orbital overlap with the electron density concentrated on opposite sides of the internuclear axis. side-by-side, or lateral orbital overlap with the electron density concentrated along the internuclear axis. none of the above
Answer:
side-by-side, or lateral orbital overlap with the electron density concentrated on opposite sides of the internuclear axis.
Explanation:
Pi bond is a type of covalent bond in which the internuclear axis has regions of orbital overlap below and above it i.e on opposite sides. As a result of the orbital overlap, a node is created along the internuclear axis.
This ultimately implies that, a pi bond is formed due to the lateral (side-by-side) overlap of the unhybridized P-orbital comprising of at least a node along the internuclear axis.
Hence, a pi bond involves side-by-side, or lateral orbital overlap with the electron density concentrated on opposite sides of the internuclear axis.
Additionally, a node is typically formed where an electron cannot be found.
How many carbon dioxide molecules should be added to the products side to obey the law of conservation of matter?
Your answer:
A.four
B.One
C.three
D.two
Answer:
four A
Explanation:
Answer: B) One
Explanation: One carbon dioxide molecule should be added to the products side to balance the equation and obey the law of conservation of matter.
Also, just took the test. One is correct.
What does the group number on the periodic table tell you about the electron configuration of a
representative element?
Answer:
The group number in the periodic table represents number of valence electrons of the elements in a certain group.
Explanation:
There are s, p, d, and f blocks, which you can see in periodic table
The s-block and p-block together are usually considered main-group elements, the d-block corresponds to the transition metals, and the f-block encompasses nearly all of the lanthanides (like lanthanum) and the actinides (like actinium)
There are three main principles, which may useful for you:
The Pauli exclusion rule basically says that at most, 2 electrons are allowed to be in the same orbital. Hund’s rule explains that each orbital in the subshell must be occupied with one single electron first before two electrons can be in the same orbital. The Aufbau process describes the process of adding electron configuration to each individualized element in the periodic table.Hope this helps!
How to Balance __MgF2 + __Li2CO3 + __ LiF
When air cools, water molecules lose energy and
or change into liquid form.
Which two climates have very low levels of precipitation
A dry and polar
B polar and highlands
C highlands and temperate marine
D temperature marine and temperature continental
Answer:
B highlands and polar, very little percipitation is found in polar regions, and high lands contributes to that
Explanation:
Answer:
B!
Explanation:
got it right on quiz. edu2021
In chemical reactions, a product is
Select one:
any substance that is made from the least number of atoms
any substance to the right of the arrow
any substance that is made of the greatest number of atoms
ubstance that s to the left of the arrow
A 40.5 g sample of aluminum is cooled 7.5°C. The specific heat capacity of aluminum is
0.900 J/g°C. What is the energy change for this sample?
Pedro created the following table for his observations on balanced and unbalanced forces. He forgot to record some of the information. Which two measurements correctly complete the table?
A. 50 N in row one and 100 N in row two
B. 100 N in row one and 30 N in row two
C. 100 N in row one and 60 N in row two
D. 90 N in row one and 50 N in row two
Answer:
Option B. 100 N in row one and 30 N in row two
Explanation:
To know the the correct answer to the question, do the following:
For Row 1:
Force to the right (Fᵣ) = 100 N
Net force (Fₙ) = 0 (since it is balanced)
Force to the left (Fₗ) =?
Fₙ = Fᵣ – Fₗ
0 = 100 – Fₗ
Collect like terms
0 – 100 = – Fₗ
– 100 = – Fₗ
Multiply through by –1
Fₗ = 100 N
For Row 2:
For the net force to be unbalanced, it means that one of the force is greater or lesser than the other.
In the question given above, the force to the left is given as 50 N and it show it is greater than the force to be right. The other force must be lesser than 50 N to result in unbalanced force according to the illustration from the question.
From the options given above, option B has a lesser force (i.e 30 N) for row 2 compared to option C which has a greater force (60 N) for row 2.
Therefore, option B gives the correct answer to the question.
If a substance has a large mass and a small volume how dense is it
Answer:
Very dense.
Explanation:
Conceptually, you are taking a large amount of atoms and putting them into a small container. This means the spaces between atoms has to be smaller and the substance is more dense. (see image)
Mathematically, the equation for density is mass divided by volume ([tex]Density=\frac{m}{v}[/tex] ). If you divide a big number by a small number, you still have a pretty big number (ex 4/2=2 versus 6/1=6)
Physical or Chemical change?
Answer: Chemical Change
Explanation:
because it probably doesnt change the physical anatomy of the object only the atoms/ molecule relations
David Robinson, a professional basketball
player, is 7 ft, 1.0 in. tall. Convert his height to
centimeters
Show work please
Answer:
215.9 cm
Explanation:
1 foot= 30.5cm
30.5cm times 7 1/12=215.9cm
The given height of David is 7 ft, 1.0 inch, so in centimeters, the height will be 216.4 cm.
What is unit conversion?A conversion factor is a number that is used to multiply or divide one set of units into another. When converting to an equal value, the appropriate conversion factor must be used.
We must convert one unit to another in order to achieve accuracy and avoid measurement confusion.
We do not, for example, measure the length of a pencil in kilometers. In this case, one must convert kilometers (km) to centimeters (cm) (cm).
To convert feet to centimeters, multiply the given foot length by 30.48 cm.
So,
Height in cm will be = 7.1 x 30.48
Height in cm = 216.4cm
Thus, the height of David in centimeters is 216.4 cm.
For more details regarding unit conversion, visit:
https://brainly.com/question/11543684
#SPJ2
What is a common effect of warm ocean currents on nearby coastlines?
A. Low wind speeds
B. Lower temperatures
C. Changing wind directions
D. Increased clouds and precipitation
David went shopping with his mom for house renovations supplies. They were looking for materials that would conduct electricity. Which material should they buy?
Copper
Glass
Plastic
Wood
Answer:
this will copper this is correct answer
Question asked: David went shopping with his mom for house renovations supplies. They were looking for materials that would conduct electricity. Which material should they buy?
Answer: Copper
Explanation: Copper would be the right answer because that's the only material that would conduct electricity.
--------------------------------------------------------------------------------------------
I hope this helps!
How many hydrogen atoms are in the compound represented by the following bond-line drawing?
ОН
Answer:
Theres no drawing
Explanation:
Show drawing
Skeletal structural diagram and bond-line drawing are similar;
Parts of the question appear missing: The number of hydrogen atoms in the attached example bond-line drawing is 6 hydrogen atoms
The reason the above value is arrived at for the attached example bond-line diagram is as follows;
A bond-line drawing is the diagram showing the molecular structure of a compound, such that covalent bonds within the molecule are represented by lines with the number of lines indicating the number of covalent bonds.
A single covalent bond is represented by one line, double bonds by two lines while three parallel lines represents a triple bond.
In bond-line drawing, the lines symbolically infer the carbon to carbon bonds while the bonds to the hydrogen atoms are implied noting that each carbon has four covalent bonds. Hydrogen atoms attached to other heteroatoms are indicated with an H.
The number of hydrogen shown in the example diagram can be found by noting that the number of covalent bonds between the carbon atoms are three, therefore, the atom of the fourth bond not shown with a line is to a hydrogen atom
There are six such carbon atoms, one of which is attached to an oxygen atom, which gives five hydrogen atoms located on the ring
There is one more hydrogen atom attached to the oxygen in the hydroxyl group, the total number of hydrogen is therefore;
5 hydrogen on ring + One hydrogen in the hydroxyl group = 6 hydrogen atoms
Learn more about bond-line drawing here:
https://brainly.com/question/13265901
help me out pleaseeee
Answer:
Help with what?
Draw all four products obtained when 2-ethyl-3-methyl-1,3-cyclohexadiene is treated with HBr at room temperature and show the mechanism of their formation. For the mechanism, include lone pairs and charges in your answer. Do not draw out any hydrogen explicitly. Do not use abbreviations such as Me or Ph.
Answer:
See explanation below
Explanation:
In this case we have reaction of addition. In this case a diene reacting with an acid as HBr. This reaction is known as Hydrohalogenation, and, as we have a diene, this kind of reaction can be done as 1,4 addition. Which means that the reaction will be undergoing with an adition in the carbon 1, and carbon 4.
At room temperature we can expect that this reaction can be done in thermodynamic conditions, Now, as the problem states that is forming 4 products, we can expect products of a 1,2 addition too. This product can be formed if the reaction is taking place in the most stable carbocation, and then, by resonance, we can expect the 1,4 product too.
Now, the HBr can be attacked by the double bond of the first position, giving two possible products or by the double bond of the third position giving the other two products. These products are all possible, obviously the most stable will be the major of all of them, but the other three are perfectly possible. One product is formed without doing much, and the other by resonance. Same happens with the other double bond.
In the picture below, you have the mechanism for all the 4 products.
Hope this helps
Help me on these 2 science questions for brainliest pleaseeeeeee...
Answer:
Explanation:
1:) A
Mostly just use context clues
2:) D
The climate on earth is mostly due to earth's atmosphere. So, no, the moon doesn't have similar weather
What contains more hydrogen atoms, 1.0 mole of H20 or 1.0 moles of НЗО?
H20
H30
both are equal
cannot be determined
(please show ur work)
(10 points) A basement (with volume V) in a residence is found to be contaminated with radon coming from the ground through the floor drains. The concentration of radon in the room is [Co] under steady-state conditions. The room behaves as a CSTR, and the decay of radon is a firstorder reaction with a decay rate constant of [k]. a. Now the condition changes: The source of radon is closed off but there is no ventilation. What is the equation that describes the concentration of radon in the basement with time [Ct]
Answer:
[tex]\mathbf{C_{Out} = C_o \ exp \Big [ - \Big ( \dfrac{1}{\dfrac{V}{Q} } + k \Big) t \Big ] }[/tex]
Explanation:
The equation that describes the concentration of the radon in the basement with time Ct is;
[tex]\mathbf{C_{Out} = C_o \ exp \Big [ - \Big ( \dfrac{1}{\theta} + k \Big) t \Big ] }[/tex]
where;
[tex]C_o[/tex] = concentration of the radon
[tex]C _ {Out}[/tex] = allowable radon concentration
k = decay rate constant
= theoretical detention
t = time needed to lower the radon concentration
The theoretical detention [tex]\theta =\dfrac{V}{Q}[/tex]
∴
[tex]\mathbf{C_{Out} = C_o \ exp \Big [ - \Big ( \dfrac{1}{\dfrac{V}{Q} } + k \Big) t \Big ] }[/tex]
Which of the following forces would take the longest amount of time to change the surface of the Earth?
A. volcano
B. earthquake
C. tsunami
D. seafloor spreading
HELPP
Answer: D
Explanation:
Cause If you head to the middle of the ocean and dive down, down, down to where the Earth's plates meet, you might find an undersea mountain split by a deep trench. It's called a mid-ocean ridge. Up through such trenches, brand-new molten rock is bubbling. That's the newest rock on Earth! How does the ocean floor make room for all that new rock? Simply by pushing the old rock aside. In fact, the ocean floor is actually spreading right at this minute, out away from the deep trenches where new rock is being formed. The oldest rock can be found farthest away from the trenches, right up near the continents. It's all part of a process called seafloor spreading. It's been going on for millions of years (at the rate of a few centimeters per year), but scientists are just now getting to know more about it. In fact, because evidence of seafloor spreading was first discovered in the 1940s and 50s, your great-grandparents may have never heard of it!
After looking at the schematics of the bubble, he finds that it holds 0.750 moles of gas at Standard Temperature and Pressure. Unfortunately for Rooster, helium gas is not sold by the mole, only by the liter. He needs to know how many liters of gas 0.750 moles of helium is.
Answer:
16.8 L
Explanation:
From the question given above, the following data were obtained:
Number of mole of He = 0.750 mole
Volume of He =?
Recall:
1 mole of any gas occupy 22.4 L at STP. This also implies that 1 mole of He occupies 22.4 L at STP.
Finally, we shall determine the volume occupied by 0.750 mole of He. This can be obtained as follow:
1 mole of He occupied 22.4 L at STP.
Therefore, 0.750 mole of He will occupy = 0.750 × 22.4 = 16.8 L at STP.
Thus, 0.750 mole of He is equivalent to 16.8 L
Which of these substances would be an alkali?
A substance which turns universal indicator orangeA substance with a pH of 1A substance which turns universal indicator blueA substance with a pH of 7
Calculate the pH of a solution that is prepared by dissolving 0.23 mol of hydrofluoric acid (HF) and 0.57 mol of hypochlorous acid (HClO) in water and diluting to 3.60 L. Also, calculate the equilibrium concentrations of HF, F2, HClO, and ClO2. (Hint: The pH will be determined by the stronger acid of this pair.)
Answer:
The equilibrium concentrations of HF = 0.058 , F2 = 0.006M , HClO =0.16M , and ClO2 = 7.7 × 10⁻⁷M.
Explanation:
The Ka values for HClO₃ and HF are given as 2.9 × 10⁻⁸ and 6.6 × 10⁻⁴ respectively. The molar concentration for HF = 0.23/ 3.60L = 0.064 M and 0.57/ 3.60 = 0.16 M.
When HF is reacted with water, it ionizes to form H₃O⁺ and F⁻. The concentration of H₃O⁺ and F⁻ can be calculated below:
HF(aq) <------------------------> H30^+ + F^-.
Ka = [H^+] [F^-]/[HF] .
6.6× 10^-4 = [x][x]/ ( 0.064- x).
x = 0.0060 M.
The concentration of H₃O⁺ and F⁻ = 0.0060 M respectively.
The pH = - log [ H₃O⁺ ] = -log [0.0060] = 2.22.
When HClO is reacted with water, it ionizes to form H₃O⁺ and F⁻. The concentration of H₃O⁺ and ClO⁻ can be calculated below:
HClO(aq) <------------------------> H30^+ + ClO^-.
Ka = [H^+] [ClO^-]/[HClO] .
6.6× 10^-4 = [0.006 + x] [x]/ ( 0.16 - x).
x = 7.7 × 10^-7M.
[ClO^-] = 7.7 × 10^-7 M.
[HClO] = 0.16 - 7.7 × 10^-7 = 0.16M.
[F^-] = 0.006 M.
[HF] = 0.064 - 0.006 = 0.058 M.
For the reaction between aqueous solutions of acetic acid (CH3COOH) and barium hydroxide, Ba(OH)2, 1. Write the balanced molecular equation.
Answer:
[tex]2CH_3COOH(aq)+Ba(OH)_2(aq)\rightarrow Ba(CH_3COO)_2(aq)+2H_2O(l)[/tex]
Explanation:
When acetic acid solution and barium hydroxide solution react together to give an aqueous solution of barium acetate and water
The balanced chemical reaction will be given by
[tex]2CH_3COOH(aq)+Ba(OH)_2(aq)\rightarrow Ba(CH_3COO)_2(aq)+2H_2O(l)[/tex]
6. Describe nuclear fusion reactions as they
occur in the sun.
Answer:
i wish i know
Explanation:
i wish i know
Some bacteria cells make people sick by releasing large molecules called toxins that affect your bodies. What
process would a bacteria cell likely use to release such large molecules?
Answer: Exocytosis is the reverse of endocytosis. Quantities of material are expelled from the cell without ever passing through the membrane as individual molecules. By using the processes of endocytosis and exocytosis, some specialized types of cells move large amounts of bulk material into and out of themselves.
Explanation:
Answer: Toxins may function to establish productive colonization conditions and work by damaging host cell membranes, by inhibiting host cell protein synthesis, and by activating secondary messengers that adversely affect host cell function.
Explanation:
infectious bacteria can make you ill. They reproduce quickly in your body. Many give off chemicals called toxins, which can damage tissue and make you sick. Examples of bacteria that cause infections include Streptococcus, Staphylococcus, and E. coli.
WOW IM A NERD
A student reacts 13 moles of iron with 21 moles of oxygen according to the following equation:
4Fe(s) + 3O2(g) +2Fe2O3(s)
How many moles of iron(III) oxide will the reaction produce?
a
34 moles
b
13 moles
c
6.5 moles
d
44 moles
Answer:
Explanation:
C
The limiting reactant in this reaction is Fe. 4 moles of Fe gives 2 moles of ferric oxide. Hence, 13 moles of Fe will give 6.5 moles of iron (iii)oxide.
What is limiting reactant ?The reactant which is not sufficient in amount determines the yield of the reaction and it is called the limiting reactant of the reaction.
In the given reaction, 4 moles of iron reacts with 3 moles of oxygen to give 2 moles of iron oxide.
given , no.of moles of oxygen gas present in the sample = 21 moles
no.of moles of Fe = 13 moles.
Here, 28 moles of Fe is needed to react with 21 moles of oxygen. Hence, Fe is the limiting reactant.
4 moles of Fe gives 2 moles of iron (III)oxide. Hence, number of moles of the product , formed from 13 moles of Fe is calculated as follows:
(13 moles ×2 moles)/4moles = 6.5m moles
Therefore, 6.5 moles of iron (III)oxide is formed from 13 moles of Fe.
Find more on limiting reactant :
https://brainly.com/question/2948214
#SPJ6
why do you think coal and petroleum are diffrent
Answer:
those both are fossil fuel but coal is used for electricity,Petroleum is used for bikes
How many moles of nitrogen are in 100.0 grams of barium nitrate?
Answer:
Hope this help you
Explanation:
The answer is 261.3368. We assume you are converting between grams Barium Nitrate and mole. You can view more details on each measurement unit: molecular weight of Barium Nitrate or mol The molecular formula for Barium Nitrate is Ba(NO3)2.
Answer:
0.382
Explanation:
